scholarly journals Low-cost Solutions for Velocimetry in Rotating and Opaque Fluid Experiments using Ultrasonic Time of Flight

2021 ◽  
Author(s):  
Fabian Burmann ◽  
Jerome Noir ◽  
Stefan Beetschen ◽  
Andrew Jackson
Keyword(s):  
Acoustic Waves ◽  
Flow Measurement ◽  
Low Cost ◽  
Time Of Flight ◽  
Zonal Flow ◽  
Gravitational Acceleration ◽  
Complex Flow ◽  
Ultrasonic Time ◽  
Theoretical Predictions ◽  
Complex Flow Structure

AbstractMany common techniques for flow measurement, such as Particle Image Velocimetry (PIV) or Ultrasonic Doppler Velocimetry (UDV), rely on the presence of reflectors in the fluid. These methods fail to operate when e.g centrifugal or gravitational acceleration leads to a rarefaction of scatterers in the fluid, as for instance in rapidly rotating experiments. In this article we present two low-cost implementations for flow measurement based on the transit time (or Time of Flight) of acoustic waves, that do not require the presence of scatterers in the fluid. We compare our two implementations against UDV in a well controlled experiment with a simple oscillating flow and show we can achieve measurements in the sub-centimeter per second velocity range with an accuracy of $\sim 5-10\%$ ∼ 5 − 10 % . We also perform measurements in a rotating experiment with a complex flow structure from which we extract the mean zonal flow, which is in good agreement with theoretical predictions.

scholarly journals Visualization of Surface Acoustic Waves in Thin Liquid Films

2016 ◽  
Vol 6 (1) ◽  
Author(s):  
R. W. Rambach ◽  
J. Taiber ◽  
C. M. L. Scheck ◽  
C. Meyer ◽  
J. Reboud ◽  
...  
Keyword(s):  
Liquid Film ◽  
Acoustic Waves ◽  
Low Cost ◽  
Thin Liquid Film ◽  
Surface Acoustic Waves ◽  
Liquid Films ◽  
Theoretical Description ◽  
Propagation Path ◽  
Microfluidic Channels ◽  
Potential Applications

Abstract We demonstrate that the propagation path of a surface acoustic wave (SAW), excited with an interdigitated transducer (IDT), can be visualized using a thin liquid film dispensed onto a lithium niobate (LiNbO3) substrate. The practical advantages of this visualization method are its rapid and simple implementation, with many potential applications including in characterising acoustic pumping within microfluidic channels. It also enables low-cost characterisation of IDT designs thereby allowing the determination of anisotropy and orientation of the piezoelectric substrate without the requirement for sophisticated and expensive equipment. Here, we show that the optical visibility of the sound path critically depends on the physical properties of the liquid film and identify heptane and methanol as most contrast rich solvents for visualization of SAW. We also provide a detailed theoretical description of this effect.

Fluid Flow Structure in Arterial Bypass Anastomosis

2005 ◽  
Vol 127 (4) ◽  
pp. 611-618 ◽  
Author(s):  
C. M. Su ◽  
D. Lee ◽  
R. Tran-Son-Tay ◽  
W. Shyy
Keyword(s):  
Fluid Flow ◽  
Flow Structure ◽  
Bypass Graft ◽  
Flow Characteristics ◽  
Navier Stokes ◽  
Complex Flow ◽  
Arterial Bypass ◽  
Flow Recirculation ◽  
Area Reduction ◽  
Complex Flow Structure

The fluid flow through a stenosed artery and its bypass graft in an anastomosis can substantially influence the outcome of bypass surgery. To help improve our understanding of this and related issues, the steady Navier-Stokes flows are computed in an idealized arterial bypass system with partially occluded host artery. Both the residual flow issued from the stenosis—which is potentially important at an earlier stage after grafting—and the complex flow structure induced by the bypass graft are investigated. Seven geometric models, including symmetric and asymmetric stenoses in the host artery, and two major aspects of the bypass system, namely, the effects of area reduction and stenosis asymmetry, are considered. By analyzing the flow characteristics in these configurations, it is found that (1) substantial area reduction leads to flow recirculation in both upstream and downstream of the stenosis and in the host artery near the toe, while diminishes the recirculation zone in the bypass graft near the bifurcation junction, (2) the asymmetry and position of the stenosis can affect the location and size of these recirculation zones, and (3) the curvature of the bypass graft can modify the fluid flow structure in the entire bypass system.

A Measurement Method Based on Kalman Filtering for Ultrasonic Time-of-Flight Estimation

2006 ◽  
Vol 55 (2) ◽  
pp. 442-448 ◽  
Author(s):  
L. Angrisani ◽  
A. Baccigalupi ◽  
R. SchianoLoMoriello
Keyword(s):  
Kalman Filtering ◽  
Measurement Method ◽  
Time Of Flight ◽  
Ultrasonic Time

scholarly journals Study of ultrasonic thermometry based on ultrasonic time-of-flight measurement

AIP Advances ◽  
2016 ◽  
Vol 6 (3) ◽  
pp. 035006 ◽  
Author(s):  
Ruixi Jia ◽  
Qingyu Xiong ◽  
Lijie Wang ◽  
Kai Wang ◽  
Xuehua Shen ◽  
...  
Keyword(s):  
Time Of Flight ◽  
Ultrasonic Time ◽  
Flight Measurement

Imaging of Defects in Thin-Walled Tubing Using Ultrasonic Time-of-Flight

1992 ◽  
pp. 581-587
Author(s):  
W. R. Fundamenski ◽  
M. P. Dolbey ◽  
M. D. C. Moles
Keyword(s):  
Time Of Flight ◽  
Ultrasonic Time ◽  
Thin Walled

Natural Convection in a Horizontal Cavity Partially Occupied by a Porous Media Saturated by a Coolant Liquid

2006 ◽  
Author(s):  
Fakhreddine S. Oueslati ◽  
Rachid Bennacer ◽  
Habib Sammouda ◽  
Ali Belghith
Keyword(s):  
Heat Transfer ◽  
Porous Media ◽  
Natural Convection ◽  
Flow Structure ◽  
Boussinesq Approximation ◽  
Density Variation ◽  
Heat Fluxes ◽  
Complex Flow ◽  
Coupled Equations ◽  
Complex Flow Structure

The natural convection is studied in a cavity witch the lower half is filled with a porous media that is saturated with a first fluid (liquid), and the upper is filled with a second fluid (gas). The horizontal borders are heated and cooled by uniform heat fluxes and vertical ones are adiabatic. The formulation of the problem is based on the Darcy-Brinkman model. The density variation is taken into account by the Boussinesq approximation. The system of the coupled equations is resolved by the classic finite volume method. The numerical results show that the variation of the conductivity of the porous media influences strongly the flow structure and the heat transfer as well as in upper that in the lower zones. The effect of conductivity is conditioned by the porosity which plays a very significant roll on the heat transfer. The structures of this flow show that this kind of problem with specific boundary conditions generates a complex flow structure of several contra-rotating two to two cells, in the upper half of the cavity.

Sign in / Sign up

Export Citation Format

Share Document