scholarly journals Dynamic positioning of an oceanographic research vessel using fuzzy logic controller in different sea states

Author(s):  
Kunal Tiwari ◽  
P. Krishnankutty
2021 ◽  
Author(s):  
Kunal Tiwari ◽  
Krishnankutty P.

Abstract A dynamic positioning system is computer controlled system which maintains the positioning and heading of ship by means of active thrust. A DP system consist of sensors, observer, controller and thrust allocation algorithm. The purpose of this paper is to investigate the performance of proportional derivative type fuzzy controller with Mamdani interface scheme for dynamic positioning of an oceanographic research vessel (ORV) by numerical simulation. Nonlinear passive observer is used to filter the noise from the position and orientation. A nonlinear mathematical model of the ORV is subjected to the wave disturbance ranging from calm to phenomenal sea. Robustness and efficiency of the fuzzy logic controller is analysed in comparison with the multivariable proportional integral derivative (PID) and the linear quadratic regulator (LQR) controller. A simplified constrained linear quadratic algorithm is used for thrust allocation. The frequency response of the closed loop system with different controllers is analysed using the bode plot. The stability of controller is established using the Lyapunov criteria.


2002 ◽  
Vol 33 (12) ◽  
pp. 979-993 ◽  
Author(s):  
Tzung-Hang Lee ◽  
Yusong Cao ◽  
Yen-Mi Lin

2019 ◽  
Vol 3 (1) ◽  
pp. 186-192
Author(s):  
Yudi Wibawa

This paper aims to study for accurate sheet trim shower position for paper making process. An accurate position is required in an automation system. A mathematical model of DC motor is used to obtain a transfer function between shaft position and applied voltage. PID controller with Ziegler-Nichols and Hang-tuning rule and Fuzzy logic controller for controlling position accuracy are required. The result reference explains it that the FLC is better than other methods and performance characteristics also improve the control of DC motor.


JURNAL ELTEK ◽  
2018 ◽  
Vol 16 (2) ◽  
pp. 125
Author(s):  
Oktriza Melfazen

Buck converter idealnya mempunyai keluaran yang stabil, pemanfaatandaya rendah, mudah untuk diatur, antarmuka yang mudah dengan pirantiyang lain, ketahanan yang lebih tinggi terhadap perubahan kondisi alam.Beberapa teknik dikembangkan untuk memenuhi parameter buckconverter. Solusi paling logis untuk digunakan pada sistem ini adalahmetode kontrol digital.Penelitian ini menelaah uji performansi terhadap stabilitas tegangankeluaran buck converter yang dikontrol dengan Logika Fuzzy metodeMamdani. Rangkaian sistem terdiri dari sumber tegangan DC variable,sensor tegangan dan Buck Converter dengan beban resistif sebagaimasukan, mikrokontroler ATMega 8535 sebagai subsistem kontroldengan metode logika fuzzy dan LCD sebagai penampil keluaran.Dengan fungsi keanggotaan error, delta error dan keanggotaan keluaranmasing-masing sebanyak 5 bagian serta metode defuzzifikasi center ofgrafity (COG), didapat hasil rerata error 0,29% pada variable masukan18V–20V dan setpoint keluaran 15V, rise time (tr) = 0,14s ; settling time(ts) = 3,4s ; maximum over shoot (%OS) = 2,6 dan error steady state(ess) = 0,3.


Author(s):  
Aarti Sahu ◽  
Laxmi Shrivastava

A wireless ad hoc network is a decentralized kind of wireless network. It is a kind of temporary Computer-to-Computer connection. It is a spontaneous network which includes mobile ad-hoc network (MANET), vehicular ad-hoc network (VANET) and Flying ad-hoc network (FANET). Mobile Ad Hoc Network (MANET) is a temporary network that can be dynamically formed to exchange information by wireless nodes or routers which may be mobile. A VANET is a sub form of MANET. It is an technology that uses vehicles as nodes in a network to make a mobile network. FANET is an ad-hoc network of flying nodes. They can fly independently or can be operated distantly. In this research paper Fuzzy based control approaches in wireless network detects & avoids congestion by developing the ad-hoc fuzzy rules as well as membership functions.In this concept, two parameters have been used as: a) Channel load b) The size of queue within intermediate nodes. These parameters constitute the input to Fuzzy logic controller. The output of Fuzzy logic control (sending rate) derives from the conjunction with Fuzzy Rules Base. The parameter used input channel load, queue length which are produce the sending rate output in fuzzy logic. This fuzzy value has been used to compare the MANET, FANET and VANET in terms of the parameters Throughput, packet loss ratio, end to end delay. The simulation results reveal that usage of Qual Net 6.1 simulator has reduced packet-loss in MANET with comparing of VANET and FANET.


Sign in / Sign up

Export Citation Format

Share Document