The effect of microstructural evolution with hydrophilic-nanosilica (SiO2) concentration, ranging from 0 to 5 wt%, on mechanical properties and deformation micromechanisms of PP/EPDM/SiO2 (80/20/x) ternary blend-nanocomposites was investigated. Morphological observations revealed that, SiO2 nanoparticles tend to localize either around the dispersed EPDM particles or at the PP/EPDM interface, promoting the formation of three dimentional network-like EPDM/SiO2 composite structures dispersed in the PP matrix, especially at higher SiO2 loadings. This type of dispersion state was further confirmed by the rheological analysis. Synergistic toughening effect of soft EPDM particles and rigid SiO2 particles under Izod impact test was observed in these ternary systems, so that the materials with a better balance of stiffness/toughness were achieved. The results demonstrated that the extent of impact toughness increase is higher, where a large amount of the SiO2 nanoparticles surrounded the EPDM dispersed particles distributed in the PP matrix. This significant increase was attributed to the change in the size of stress concentration region and evolution of stress distribution throughout the material. The failure mechanisms were studied, and the underlying toughening micromechanisms were proposed.
Mechanism of Thermal Degradation-Induced Gel Formation in Polyamide 6/Ethylene Vinyl Alcohol Blend Nanocomposites Studied by Time-Resolved Rheology and Hyphenated Thermogravimetric Analyzer Fourier Transform Infrared Spectroscopy Mass Spectroscopy: Synergistic Role of Nanoparticles and Maleic-anhydride-Grafted Polypropylene
