Aerodynamic Characteristics and Flow Structure of Hawkmoth-Like Wing with LE Vein

An experimental study has been conducted to study the effect of the dome geometry on the aerodynamic characteristics of a non-reacting flow field. The flow was generated by a counter-rotating radial-radial swirler consisting of an inner, primary swirler generating counter-clockwise rotation and an outer, secondary swirler generating clockwise rotation. The dome geometry was modified by introducing dome expansion angles of 60° and 45° with respect to the swirler centerline, in addition to the baseline case of sudden expansion (90°). The flow downstream of the swirler is confined by a 50.8mm × 50.8mm × 304.8mm (2″ × 2″ × 12″) plexiglass chamber. A two-component laser doppler velocimetry (LDV) system was used to measure the velocities in the flow field. The dome geometry is seen to have a clear impact on mean swirling flow structure near the swirler exit rather than the downstream flow field. For the configurations with 60° and 45° expansion, no corner recirculation zone is observed and the swirling flow structure is asymmetric due to the non-axisymmetric dome geometry. The cross-section area of central recirculation zone is larger for dome geometry with 60° expansion angle, as compared to the 90° and 45° cases. The configurations with 60° and 45° expansion have higher magnitudes of negative velocity inside the core of central recirculation zone, as compared to the configuration with 90° expansion angle.

Download Full-text

An Experimental and Numerical Investigation of the Aerodynamic Characteristics of a Flameless Combustor

Volume 4A: Combustion, Fuels, and Emissions ◽

10.1115/gt2019-90895 ◽

2019 ◽

Author(s):

M. P. Huijts ◽

A. A. V. Perpignan ◽

A. G. Rao

Keyword(s):

Flow Field ◽

Numerical Investigation ◽

Flow Structure ◽

Gas Turbines ◽

Turbulence Models ◽

Fuel Mixture ◽

Aerodynamic Characteristics ◽

Navier Stokes ◽

Chamber Length ◽

Image Velocimetry

Abstract The flameless combustion (FC) regime is a promising technology for gas turbines, as it potentially yields lower NOx emissions while maintaining high combustion efficiencies. However, the application of FC to gas turbines is still challenging as required conditions for its occurrence depend on several factors such as reactants mixing, residence times, heat losses, and chemical time-scales. Since the mixing of the reactants and incoming fresh air-fuel mixture plays an important role in FC, the aerodynamic characteristics of the combustor are instrumental in determining the combustor emission performance. Focusing on the aerodynamic characteristics, this paper is dedicated to the visualization and description of the flow inside a jet-based combustor designed to operate under FC. The cylindrical combustor has a FLOX® burner head with 12 concentrically placed nozzles, while an acrylic cylinder allowed full optical access to the flow field. The investigation was performed for non-reactive flow. Using Particle Image Velocimetry and a Reynolds-averaged Navier-Stokes CFD analysis, the flow was visualized and modelled. The simulations were run with the Standard and Realizable k-ε (SKE and RKE, respectively), as well as a Reynolds Stress turbulence model. The effect of modifying the SKE model C1ε constant was also investigated. In the experimental campaign, the influence of combustion chamber length, nozzle diameter, and jet velocity were investigated with respect to flow structure, recirculation ratios and entrainment behavior. The results show that the flow structure is mainly dependent on nozzle diameters, while the jet momentum is the correct parameter to assess the recirculation impact of a certain jet flow. The numerical investigation shows that the turbulence intensity at the boundaries is an important parameter to accurately simulate the jet spreading. None of the used turbulence models fully represented the flow field. Nonetheless, the SKE model with model C1ε = 1.44 was the best at representing the jets penetration and vortex core positions, and the recirculation ratio values predicted by it were in good agreement.

Download Full-text