Computer simulation and flow visualization of thermocapillary flow in a silicone oil floating zone

1995 ◽  
Vol 38 (3) ◽  
pp. 503-510 ◽  
Author(s):  
Y. Tao ◽  
R. Sakidja ◽  
S. Kou
2000 ◽  
Author(s):  
Amrutur V. Anilkumar ◽  
Richard N. Grugel

Abstract The streaming induced in a short vertical liquid column by the vibration of one of the supporting end walls has been utilized in this novel study. Vibration essentially drives a surface flow in the zone away from the vibrating wall, with the return flow in the bulk towards the wall. Preliminary measurements of the surface streaming velocity show that it increases with the frequency and amplitude of vibration and the zone length, and decreases with the viscosity of the zone liquid. This controlled surface streaming has been employed to balance a opposing, steady thermocapillary flow in model half-zones of silicone oil and Sodium Nitrate. In addition, in a float-zone solidification experiment with Sodium Nitrate - Barium Nitrate eutectic as the study material, we have demonstrated that streaming-based balancing of thermocapillary flow promotes a planar solid/liquid interface and a uniform microstructure.


1993 ◽  
Vol 131 (1-2) ◽  
pp. 83-96 ◽  
Author(s):  
Jing Li ◽  
Jiong Sun ◽  
Ziad Saghir

2013 ◽  
Vol 714 ◽  
pp. 644-670 ◽  
Author(s):  
V. Shevtsova ◽  
Y. A. Gaponenko ◽  
A. Nepomnyashchy

AbstractWe present the results of a numerical study of the thermocapillary (Marangoni) convection in a liquid bridge of $\mathit{Pr}= 12$ ($n$-decane) and $\mathit{Pr}= 68$ (5 cSt silicone oil) when the interface is subjected to an axial gas stream. The gas flow is co- or counter-directed with respect to the Marangoni flow. In the case when the gas stream comes from the cold side, it cools down the interface to a temperature lower than that of the liquid beneath and in a certain region of the parameter space that cooling causes an instability due to a temperature difference in the direction perpendicular to the interface. The disturbances are swept by the thermocapillary flow to the cold side, which leads to the appearance of axisymmetric waves propagating in the axial direction from the hot to cold side. The mechanism of this new two-dimensional oscillatory instability is similar to that of the Pearson’s instability of the rest state in a thin layer heated from below (Pearson, J. Fluid Mech., vol. 4, 1958, p. 489), and it appears at the value of the transverse Marangoni number ${ \mathit{Ma}}_{\perp }^{cr} \approx 39\text{{\ndash}} 44$ lower than that of the Pearson’s instability in a horizontal layer ($48\lt { \mathit{Ma}}_{\perp }^{cr} \lt 80$, depending on the Biot number). The generality of the instability mechanism indicates that it is not limited to cylindrical geometry and might be observed in a liquid layer with cold gas stream.


Sign in / Sign up

Export Citation Format

Share Document