Elastic-stiffness tensor of metal-matrix composites measured by electromagnetic acoustic resonance

Micromechanics-based effective elastic and plastic formulations of metal matrix composites (MMCs) containing randomly located and randomly oriented particles are developed. The averaging process over all orientations upon three elastic governing equations for aligned particle-reinforced MMCs is performed to obtain the explicit formulation of effective elastic stiffness of MMCs with randomly oriented particles. The effects of volume fraction of particles and particle shape on the overall elastic constants are studied. Comparisons with the Hashin-Shtrikman bounds and Ponte Castaneda-Willis bounds show that the present effective elastic formulation does not violate the variational bounds. Good agreement with experimental elastic stiffness data is also illustrated. Furthermore, the orientational averaging procedure is employed to derive the overall elastoplastic yield function for the MMCs. Elastoplastic constitutive relations for the composites are constructed on the basis of the derived composite yield function. The stress-strain responses of MMCs under the axisymmetric loading are also investigated in detail. Finally, elastoplastic comparisons with the experimental data for SiCp/Al composites are performed to illustrate the capability of the proposed formulation.

Download Full-text

Damage evolution in AA2124/SiC metal matrix composites under tension with consecutive unloadings

Archives of Civil and Mechanical Engineering ◽

10.1007/s43452-020-00134-x ◽

2020 ◽

Vol 20 (4) ◽

Author(s):

A. Rutecka ◽

M. Kursa ◽

K. Pietrzak ◽

K. Kowalczyk-Gajewska ◽

K. Makowska ◽

...

Keyword(s):

Metal Matrix Composites ◽

Metal Matrix ◽

Damage Evolution ◽

Effective Properties ◽

Tensile Tests ◽

Elastic Stiffness ◽

Matrix Composites ◽

Stiffness Reduction ◽

Numerical Predictions ◽

Sic Particles

Abstract Nonlinear properties of metal matrix composites (MMCs) are studied. The research combines results of loading–unloading tensile tests, microstructural observations and numerical predictions by means of micromechanical mean-field models. AA2124/SiC metal matrix composites with SiC particles, produced by the Aerospace Metal Composites Ltd. (AMC) are investigated. The aluminum matrix is reinforced with 17% and 25% of SiC particles. The best conditions to evaluate the current elastic stiffness modulus have been assessed. Tensile tests were carried out with consecutive unloading loops to obtain actual tensile modulus and study degradation of elastic properties of the composites. The microstructure examination by scanning electron microscopy (SEM) showed a variety of phenomena occurring during composite deformation and possible sources of elastic stiffness reduction and damage evolution have been indicated. Two micromechanical approaches, the incremental Mori–Tanaka (MT) and self-consistent (SC) schemes, are applied to estimate effective properties of the composites. The standard formulations are extended to take into account elasto-plasticity and damage development in the metal phase. The method of direct linearization performed for the tangent or secant stiffness moduli is formulated. Predictions of both approaches are compared with experimental results of tensile tests in the elastic–plastic regime. The question is addressed how to perform the micromechanical modelling if the actual stress–strain curve of metal matrix is unknown.

Download Full-text

Measurement of elastic-stiffness tensor of an anisotropic thin film by electromagnetic acoustic resonance

Ultrasonics ◽

10.1016/s0041-624x(02)00116-6 ◽

2002 ◽

Vol 40 (1-8) ◽

pp. 333-336 ◽

Cited By ~ 3

Author(s):

Hirotsugu Ogi ◽

Goh Shimoike ◽

Kazuki Takashima ◽

Masahiko Hirao

Keyword(s):

Thin Film ◽

Acoustic Resonance ◽

Elastic Stiffness ◽

Stiffness Tensor ◽

Elastic Stiffness Tensor

Download Full-text

Electron Microscopy of Metal-Matrix Composites

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100069016 ◽

1970 ◽

Vol 28 ◽

pp. 404-405

Author(s):

A. Lawley ◽

M. R. Pinnel ◽

A. Pattnaik

Keyword(s):

Electron Microscopy ◽

Metal Matrix Composites ◽

Metal Matrix ◽

Critical Evaluation ◽

Elastic Behavior ◽

Matrix Composites ◽

Directionally Solidified ◽

Fracture Characteristics ◽

Broad Program

As part of a broad program on composite materials, the role of the interface on the micromechanics of deformation of metal-matrix composites is being studied. The approach is to correlate elastic behavior, micro and macroyielding, flow, and fracture behavior with associated structural detail (dislocation substructure, fracture characteristics) and stress-state. This provides an understanding of the mode of deformation from an atomistic viewpoint; a critical evaluation can then be made of existing models of composite behavior based on continuum mechanics. This paper covers the electron microscopy (transmission, fractography, scanning microscopy) of two distinct forms of composite material: conventional fiber-reinforced (aluminum-stainless steel) and directionally solidified eutectic alloys (aluminum-copper). In the former, the interface is in the form of a compound and/or solid solution whereas in directionally solidified alloys, the interface consists of a precise crystallographic boundary between the two constituents of the eutectic.

Download Full-text

TEM examination of 2014-SiC metal matrix composite

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100105692 ◽

1988 ◽

Vol 46 ◽

pp. 726-727

Author(s):

M. G. Burke ◽

M. N. Gungor ◽

P. K. Liaw

Keyword(s):

Metal Matrix Composite ◽

Metal Matrix Composites ◽

Matrix Composite ◽

Metal Matrix ◽

Tensile Deformation ◽

Microstructural Characterization ◽

Thin Foil ◽

Matrix Alloy ◽

Matrix Composites ◽

Ion Milling

Aluminum-based metal matrix composites offer unique combinations of high specific strength and high stiffness. The improvement in strength and stiffness is related to the particulate reinforcement and the particular matrix alloy chosen. In this way, the metal matrix composite can be tailored for specific materials applications. The microstructural characterization of metal matrix composites is thus important in the development of these materials. In this study, the structure of a p/m 2014-SiC particulate metal matrix composite has been examined after extrusion and tensile deformation.Thin-foil specimens of the 2014-20 vol.% SiCp metal matrix composite were prepared by dimpling to approximately 35 μm prior to ion-milling using a Gatan Dual Ion Mill equipped with a cold stage. These samples were then examined in a Philips 400T TEM/STEM operated at 120 kV. Two material conditions were evaluated: after extrusion (80:1); and after tensile deformation at 250°C.

Download Full-text