Aviation industry is considered one of the contributors to atmospheric CO2emissions. It is forced to cut off carbon dioxide emission starting 2020. Current trends in bio-jet production involve mega projects with million dollars of investments. In this study, bio-jet fuel production by blending bio-diesel with traditional jet fuel at different concentrations of bio-diesel (5, 10, 15, 20 vol. %) was investigated. This blending technique will reduce bio-jet production cost compared to other bio-jet techniques. Bio-diesel was originally produced by the transesterification of non-edible vegetable oil (renewable sources), so, its blend with jet fuel will has a reduced carbon foot print. The blend was tested to ensure that the end product will meet the ASTM D1655 international specifications for Jet A-1 and Jet A and can be used in aircrafts.Available data on biodiesel blending with jet fuel in the literature is not consistent, there are many contradictory results. Hence, more investigations are required using locally available feedstocks. The main physicochemical properties for Jet A-1 and Jet A according to ASTM D1655 were tested to check if the blend will be compatible with existing turbojet engine systems. Different tests were conducted; vacuum distillation, smoke point, kinematic viscosity, density, flash point, total acidity and freezing point. In addition, heating value of the blend was calculated. The result was then compared with calculated value using blending indices available in the literature. Blending indices were able to predict the laboratory measured specifications for the studied blends.It was found that only 5% bio-diesel- 95% jet fuel blend (B5) meets ASTM standard for Jet A. Hence, biodiesel can be safely used as a blend with fossil-based jet for a concentration of up to 5% without any change in the ASTM specifications. Freezing point is the most important constrain for this blending technique. Higher blends of biodiesel will cause the bio-jet blend to fail ASTM specifications. In general, blending technique will reduce the cost impact that may have been incurred due to change in infrastructure when using other production techniques.
Fischer-Tropsch and Conventional Jet Fuel Blending