scholarly journals Non-isothermal Ragone plots of Li-ion cells from datasheet and galvanostatic discharge tests

2019 ◽  
Vol 247 ◽  
pp. 703-715 ◽  
Author(s):  
Yuan Ci Zhang ◽  
Olivier Briat ◽  
Loïc Boulon ◽  
Jean-Yves Deletage ◽  
Cyril Martin ◽  
...  
2015 ◽  
Vol 1092-1093 ◽  
pp. 185-190 ◽  
Author(s):  
Jing Wang ◽  
Mei Juan Zhou ◽  
Feng Wu ◽  
Shi Chen

Dopamine was used as the carbon precursor to prepare SiO/C composite. Dopamine achieved self-polymerization and covered on the surface of the SiO particles in Tris-buffer, and the SiO/C composites were gained after heat-treating in the tube furnace under Argon. X-ray diffraction ( XRD ) , scanning electron microscope ( SEM ) were used to determine the phases obtained and to observe the morphologies of the composite. The galvanostatic discharge/charge test was carried out to characterize the electrochemical properties of the composite. When the sample of the mixed SiO and dopamine at a weight ratio of 1 : 3, the composite showed the best cycle ability with the discharge capacity of 1362 mAh g−1 in the first cycle, and the initial coulombic efficiency is 55.6%, after 50 cycles, the discharge capacity is 442 mAh g−1. The improved stability of the composite is attributed to carbon-coating forming during heat-treatment process.


2015 ◽  
Vol 245 ◽  
pp. 109-115 ◽  
Author(s):  
Denis P. Opra ◽  
Sergey V. Gnedenkov ◽  
Alexander A. Sokolov ◽  
Valery G. Kuryavyi ◽  
Alexander Yu. Ustinov ◽  
...  

The prospects of an original method of pulsed high-voltage discharge in synthesis of nanostructured FeOF–FeF3 composite anode for Li-ion battery has been demonstrated. Scanning electron microscopy investigation shows as-synthesized FeOF–FeF3 consists of nanocrystallites ranging in sizes from 10 to 300 nm. Galvanostatic discharge–charge cycling of the Li/FeOF–FeF3 half-cell at current density of 10 mA g–1 in the range from 3.0 to 0.005 V yields 210 mAh g–1 after 10 cycles. The electrochemical reaction mechanism within the Li/FeOF–FeF3 has been investigated by the cyclic voltammetry method.


2013 ◽  
Vol 833 ◽  
pp. 56-60
Author(s):  
Yu Xin Yin ◽  
Ding Shan Ruan ◽  
Mei Yan Chang ◽  
Feng Hou ◽  
Hong Xia Wang

Carbon-coated SnO2 particles (SnO2/C) were first synthesized by hydrolysis of SnCl4 in the sucrose solution at 85 °C, where sucrose is the carbon source. These particles were then mixed with La0.7Sr0.3MnO3 (LSM) through a suspension stirring process to form SnO2/C-LSM composites. The results of SEM and EDX show that LSM particles are distributed in SnO2/C uniformly. Galvanostatic discharge-charge measurement was used to test the electrochemical performance of SnO2/C and SnO2/C-LSM. It was found that the specific reversible capacity increased from165 mAh/g for SnO2/C to 270 mAh/g for SnO2/C-LSM after 50 cycles. This improvement may be attributed to the lower charge transfer resistance and higher electronic conductivity resulted from introducing LSM.


2013 ◽  
Vol 51 (6) ◽  
pp. 429-436 ◽  
Author(s):  
Jeong Eun Chae ◽  
Jun-Mo Yang ◽  
Kyung Jin Park ◽  
Jung Ho Yoo ◽  
Yun Chang Park ◽  
...  

Author(s):  
J.H. Lee ◽  
M.H. Kim ◽  
S.H. Lee ◽  
S.Y. Jin ◽  
W.H. Park

Sign in / Sign up

Export Citation Format

Share Document