2D Layered Mn and Ru Oxide Nanosheets for Real-time Breath Humidity Monitoring

Temperature and humidity data collection using real-time sensors and data loggers was conducted for integrated pest management in the collection storage and exhibition space of the Jeongnimsaji Museum, Buyeo. The real-time temperature and humidity monitoring system collected measurement data every 30 minutes and enabled real-time confirmation of the data through a linked application. If the temperature and humidity data measured in the real-time temperature and humidity monitoring system exceeds the set range, a push notification was sent to the mobile phone of the person in charge to provide status information to establish a continuous management system. Through this, it was possible to immediately recognize and take action when the temperature range exceeded the recommended relic temperature in August. We performed data visualization on the concentration of airborne fungus in the storage area and the inflow path and density of insects. Based on the recommended criteria presented by the National Institute of Cultural Heritage, The data on the spatial and temporal concentration of airborne fungus inside the collection storage were found to be maintained at a value below the standard recommended by the National Institute of Cultural Heritage (80 CFU/m3). Also, as a result of the insect inflow survey, no insects were captured inside the storage area, and in the case of the exhibition space, insects such as Scutigera coleoptrata, Loxoblemmus arietulus, Diestrammena asynamora, Koreoniscus racovitzai were captured. Based on this, as a result of visualization according to the individual density of captured insects by area, it was confirmed that the main inflow paths of insects were the external entrance and the toilet area.

Download Full-text

A Novel IoT Enabled System for detection of Infected Leaf for Smart Agricultural

Journal of University of Shanghai for Science and Technology ◽

10.51201/jusst12612 ◽

2021 ◽

Vol 23 (2) ◽

Author(s):

Abhishek Shukla ◽

◽

Dr. Rohit Miri

Keyword(s):

Real Time ◽

Learning System ◽

Infected Leaf ◽

Time Data ◽

Leaf Quality ◽

Accuracy Level ◽

Real Time Image ◽

Time Image ◽

Humidity Monitoring

As we know 2020 is a year which created lots of issues with every type of the business. Even it affects the agricultural eco system. Due to COVID-19 there is very less man power is available and farmers who are doing forming in larger way, they need lots of man power to monitor & maintain their farmers. Due to lack in man power its very difficult for the formers to monitor their farms from remotely, so there is need of system which is able to provide smart agricultural features like temperature & humidity monitoring remotely apart from that farmer have the power to monitor the quality of their leaves. So, in this paper we present an IoT enabled system which is able to track the temperature & Humidity from the remotely apart from that it is also able to capture the image of the leaf and send to server where in server using Computer vision & machine learning system, we will track the leaf quality. In this paper we proposed a hardware unit which is basically using ESP32 Cam and DHT11. Here ESP-32 work as smart CAM which is able to track the image of the leaf and send those real time image to the server. Here we are using think speak to store the accuracy level parameters of each leaf record. Similar we will store temperature & humidity real time data on the think speak server. Think speak server is powered by math work.

Download Full-text

A plastic optical fibre sensor for real-time humidity monitoring

Measurement Science and Technology ◽

10.1088/0957-0233/14/6/306 ◽

2003 ◽

Vol 14 (6) ◽

pp. 746-750 ◽

Cited By ~ 129

Author(s):

Shinzo Muto ◽

Osamu Suzuki ◽

Takashi Amano ◽

Masayuki Morisawa

Keyword(s):

Real Time ◽

Optical Fibre ◽

Optical Fibre Sensor ◽

Fibre Sensor ◽

Humidity Monitoring

Download Full-text

Design of Underground Gas Concentration and Humidity Monitoring System Based on RS-485

Advanced Materials Research ◽

10.4028/www.scientific.net/amr.989-994.2962 ◽

2014 ◽

Vol 989-994 ◽

pp. 2962-2964

Author(s):

Yue Hong Long

Keyword(s):

Real Time ◽

Coal Mine ◽

Humidity Sensor ◽

Long Distance ◽

Monitoring Point ◽

Underground Coal Mine ◽

Gas Concentration ◽

Master Station ◽

Upper Computer ◽

Humidity Monitoring

In order to achieve long distance monitoring of gas concentration and humidity underground coal mine,a new monitor of gas concentration and humidity,which contains upper computer,master station and a lot of monitoring points,is designed.Every monitoring point is consisted of gas concentration sensor MJC4/3.0L and humidity sensor HS1101,which is used to conveys the data to master station by RS-485,again by RS-485 transmitted to the upper computer and it realizes the real-time monitoring of gas concentration and humidity undereground coal mine.

Download Full-text

Pendampingan Penerapan IoT untuk Monitoring dan Kontrol Listrik untuk Petani Hidroganik Desa Kanigoro Malang

Jurnal Pengabdian Masyarakat Universitas Merdeka Malang ◽

10.26905/abdimas.v6i3.5107 ◽

2021 ◽

Vol 6 (3) ◽

pp. 315-325

Author(s):

Darto Darto ◽

Agus Suprapto ◽

Wahyu Dirgantara

Keyword(s):

Real Time ◽

Short Circuit ◽

Ip Address ◽

Flow Monitoring ◽

Monitoring Tools ◽

Three Stages ◽

Farmer Groups ◽

Sensor Temperature ◽

And Training ◽

Humidity Monitoring

The farming profession in the industrial era 4.0 is considered ancient and has no potential and bonafide. To change such a mindset, Community Service (PKM-Unmer Building Village) in collaboration with hydroganic farmer groups to make greenhouse and hydro-gas models accompanied by water flow monitoring (flow sensor), temperature, and humidity monitoring (DHT11 sensor) and electricity control (UPS). By utilizing the IoT concept in a monitoring tool that is placed in hydroganics, it can monitor the flow of water and plants in real-time. To access monitoring, the cellphone must be connected to the same wifi as the device, then enter the IP address using a mobile browser. The method of implementation used consists of three stages: preparation includes a review of partner locations, coordination, and the number of partners and existing facilities, pilot and, socialization. The results obtained from this activity are to accelerate and make it easier to control the hydroganics contained in the greenhouse in real-time. By utilizing a UPS to make the water pump always on, the equipment is not easily damaged if there is an electrical disturbance such as a blackout or short circuit. PKM-Unmer Building Village produces a pilot modeled in a greenhouse, socialization to the community and Bengkel Mimpi farmer groups, and training to make simple monitoring tools.

Download Full-text

Implementation of embedded real-time monitoring temperature and humidity system

Indonesian Journal of Electrical Engineering and Computer Science ◽

10.11591/ijeecs.v16.i1.pp184-190 ◽

2019 ◽

Vol 16 (1) ◽

pp. 184 ◽

Cited By ~ 1

Author(s):

Firdaus Hashim ◽

Roslina Mohamad ◽

Murizah Kassim ◽

Saiful Izwan Suliman ◽

Nuzli Mohamad Anas ◽

...

Keyword(s):

Real Time ◽

Monitoring System ◽

Comfort Level ◽

Outdoor Environment ◽

Maintenance Cost ◽

System Call ◽

Real Time Monitoring ◽

Temperature And Humidity ◽

Humidity Monitoring ◽

Indoor And Outdoor

<span>Temperature and humidity are among the parameters that significant to the industrial and agricultural. Traditionally, these elements are monitored inefficiently through wired monitoring system that caused higher implementation and maintenance cost. In addition, the device to detect the temperature such thermometer is not suitable for real-time monitoring since it need a longer response time to measure. With the advent of wireless technology, the temperature and humidity are monitored remotely and effectively. This paper aims to describe the implementation of an embedded real-time temperature and humidity monitoring system, using Arduino for Internet of Things (IoT) application. The system integrates the Arduino node with a dashboard system call Node-FRED, which interfaced to the LoRa radio through the Things Network gateway. This IoT application is deployed on both indoor and outdoor environment, to investigate the relation between the temperature and humidity level in order to manage the environment at more comfort level.</span>

Download Full-text

Self-powered humidity sensor based on polypyrrole/melamine aerogel for real-time humidity monitoring

IEEE Sensors Journal ◽

10.1109/jsen.2020.3027743 ◽

2020 ◽

pp. 1-1

Author(s):

Li Xiaoqiang ◽

Sun Qian ◽

Kan Yan ◽

Zhu Yanan ◽

Pang Zengyuan ◽

...

Keyword(s):

Real Time ◽

Humidity Sensor ◽

Self Powered ◽

Humidity Monitoring

Download Full-text

Wearable humidity sensors based on bar-printed poly(ionic liquid) for real-time humidity monitoring systems

Sensors and Actuators B Chemical ◽

10.1016/j.snb.2021.131248 ◽

2021 ◽

pp. 131248

Author(s):

Sang-Joon Park ◽

Jun-Young Jeon ◽

Tae-Jun Ha

Keyword(s):

Ionic Liquid ◽

Real Time ◽

Monitoring Systems ◽

Humidity Sensors ◽

Poly Ionic Liquid ◽

Humidity Monitoring

Download Full-text

Temperature and Humidity Monitoring System Based on CC2530

Applied Mechanics and Materials ◽

10.4028/www.scientific.net/amm.333-335.460 ◽

2013 ◽

Vol 333-335 ◽

pp. 460-464

Author(s):

Bo Xu ◽

Yong Jun Zheng ◽

Yan Xin Yin ◽

Yu Tan

Keyword(s):

Data Collection ◽

Real Time ◽

Wireless Network ◽

Monitoring System ◽

Wireless Transmission ◽

Network Technology ◽

Real Time Monitoring ◽

Temperature And Humidity ◽

Measure Field ◽

Humidity Monitoring

This paper introduced a system based on wireless network technology, which achieved node-to-node data collection and transmission. The ZigBee-based wireless network of the system adopted the chip CC2530 of TI company. The system developed applications based on Z-STACK for data collection and wireless transmission, it used VC++ to make a PC software for real-time monitoring of temperature and humidity. The research results show the feasibility of the system, and it would be widely used in the measure field of agriculture.

Download Full-text