The effect of the hydrothermal carbonization process on palm oil empty fruit bunch

2012 ◽  
Vol 47 ◽  
pp. 82-90 ◽  
Author(s):  
Saidatul S. Jamari ◽  
Jonathan R. Howse
2016 ◽  
Vol 18 (02) ◽  
pp. 116-123
Author(s):  
Rakhman Sarwono ◽  
Silvester Tursiloadi ◽  
Kiky Corneliasari Sembiring

ABSTRACT Empty fruit bunch (EFB) of palm oil is a waste from the palm oil industries which in a large amount, those waste is not properly utilized yet. EFB is a lignocelluloses waste as a polymer with big molecule such as cellulose, lignin, and hemicelluloses that can be degraded into smaller molecules in hydrothermal carbonization (HTC) process. The HTC process of EFB will result three fractions such as gas, organic water soluble and biochar as solid residue or bio-char-water-slurry. EFB degradation is influenced by the operation conditions such as temperature, pressure, catalysts, reaction time, stirring and ratio liquid and solid. The HTC process involved many routes of reaction such as liquefaction, hydrolysis, dehydration, decarboxylation, condensation, aromatization, and polymerization. In this experiment 60 ml closed vessel was used as the HTC reactor to degrade of EFB. EFB concentration of 6.44% resulted 62% of conversion. Reaction time of 6 hours resulted 62 % of conversion. Increasing the reaction time and temperature increase the conversion of EFB. Liquid products of organic water soluble has cleared yellow color, after several hours the color become darkness that is further reaction still occurs in that solution. Solid products is biochar as brown coal, that can be easily separated and processed into powder, pellet or briquette form with outstanding storage and transport characteristics. For further economic development, biochar with excellent transport characteristics, the possibility of exporting this commodity to the worlds energy market is possible. Key words: EFB, hydrothermal, carbonization, conversion, biochar


2019 ◽  
Vol 2 (1) ◽  
pp. 59-64
Author(s):  
Vincentius Vincentius ◽  
Evita H. Legowo ◽  
Irvan S. Kartawiria

Natural gas is a source of energy that comes from the earth which is depleting every day, an alternative source of energy is needed and one of the sources comes from biogas. There is an abundance of empty fruit bunch (EFB) that comes from palm oil plantation that can become a substrate for biogas production. A methodology of fermentation based on Verein Deutscher Ingenieure was used to utilize EFB as a substrate to produce biogas using biogas sludge and wastewater sludge as inoculum in wet fermentation process under mesophilic condition. Another optimization was done by adding a different water ratio to the inoculum mixture. In 20 days, an average of 6gr from 150gr of total EFB used in each sample was consumed by the microbes. The best result from 20 days of experiment with both biogas sludge and wastewater sludge as inoculum were the one added with 150gr of water that produced 2910ml and 2185ml of gas respectively. The highest CH 4 produced achieved from biogas sludge and wastewater sludge with an addition of 150gr of water to the inoculum were 27% and 22% CH 4 respectively. This shows that biogas sludge is better in term of volume of gas that is produced and CH percentage.


Fermentation ◽  
2021 ◽  
Vol 7 (2) ◽  
pp. 81
Author(s):  
Hironaga Akita ◽  
Mohd Zulkhairi Mohd Yusoff ◽  
Shinji Fujimoto

Malaysia is the second largest palm oil producer and exporter globally. When crude palm oil is produced in both plantations and oil processing mills, a large amount of oil palm empty fruit bunch (OPEFB) is simultaneously produced as a waste product. Here, we describe the preparation of hydrolysate from OPEFB. After OPEFB was hydrothermally treated at 180–200 °C, the resultant liquid phase was subjected to high-performance liquid chromatography analysis, while the solid phase was used for acidic and enzymatic hydrolysis. Hemicellulose yield from the acid-treated solid phase decreased from 153 mg/g-OPEFB to 27.5 mg/g-OPEFB by increasing the hydrothermal treatment temperature from 180 to 200 °C. Glucose yield from the enzyme-treated solid phase obtained after hydrothermal treatment at 200 °C was the highest (234 ± 1.90 mg/g-OPEFB, 61.7% production efficiency). In contrast, xylose, mannose, galactose, and arabinose yields in the hydrolysate prepared from the solid phase hydrothermally treated at 200 °C were the lowest. Thus, we concluded that the optimum temperature for hydrothermal pretreatment was 200 °C, which was caused by the low hemicellulose yield. Based on these results, we have established an effective method for preparing OPEFB hydrolysates with high glucose content.


GCB Bioenergy ◽  
2021 ◽  
Author(s):  
Kang Kang ◽  
Tianle Zhang ◽  
Guotao Sun ◽  
Mingqiang Zhu ◽  
Kankan Li ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document