Implementation of lignin-based biorefinery into a Canadian softwood kraft pulp mill: Optimal resources integration and economic viability assessment

2014 ◽  
Vol 67 ◽  
pp. 473-482 ◽  
Author(s):  
Marzouk Benali ◽  
Zoé Périn-Levasseur ◽  
Luciana Savulescu ◽  
Lamfeddal Kouisni ◽  
Naceur Jemaa ◽  
...  
Keyword(s):  
Kraft Pulp ◽  
Pulp Mill ◽  
Economic Viability ◽  
Viability Assessment ◽  
Kraft Pulp Mill ◽  
Softwood Kraft Pulp ◽  
Resources Integration

scholarly journals Consequences in a softwood kraft pulp mill of initial high alkali concentration in the impregnation stage

2019 ◽  
Vol 34 (1) ◽  
pp. 28-35 ◽  
Author(s):  
Elisabet Brännvall ◽  
Ida Kulander
Keyword(s):  
Kraft Pulp ◽  
Pulp Mill ◽  
Alkali Concentration ◽  
Pulp Yield ◽  
Kraft Pulp Mill ◽  
White Liquor ◽  
High Initial Concentration ◽  
Softwood Kraft Pulp ◽  
High Alkali ◽  
Energy Balances

Abstract Impregnation with high initial concentration is fast and efficient, leading to a homogeneous delignification in the subsequent cook, resulting in improved screened pulp yield. To obtain high initial alkali concentration, the white liquor flow needs to be significantly increased. The moisture content of the wood chips and the alkali concentration of the white liquor limit the initial alkali concentration of the impregnation liquor that can be reached. It is therefore of interest to evaluate the possibility to implement high alkali impregnation (HAI) industrially and the consequences this would have on the mill system. The effect of HAI on mass and energy balances in a kraft pulp mill has been studied using mill model simulations. The sensitivity to disturbances in important parameters for process control has been compared to impregnation scenarios used industrially. It was shown that high initial alkali concentration can be achieved on industrial scale by increased white liquor flow. HAI has a positive effect on recovery flows and reduces the need for make-up chemicals. The HAI concept is less sensitive to variations in process parameters, such as chip moisture and white liquor concentration, thus diminishing the risk of alkali depletion in chip cores.

Life Cycle Assessment of lignin extraction in a softwood kraft pulp mill

2016 ◽  
Vol 31 (1) ◽  
pp. 30-40 ◽  
Author(s):  
Charles Culbertson ◽  
Trevor Treasure ◽  
Richard Venditti ◽  
Hasan Jameel ◽  
Ronalds Gonzalez
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Kraft Pulp ◽  
Pulp Mill ◽  
Kraft Pulp Mill ◽  
Lignin Extraction ◽  
Softwood Kraft Pulp

Formation and degradation of mutagens in kraft pulp mill water systems

1990 ◽  
Vol 5 (3) ◽  
pp. 142-147 ◽  
Author(s):  
Annika Smeds ◽  
Bjarne Holmbom ◽  
Åbo Akademi ◽  
Leena Tikkanen
Keyword(s):  
Kraft Pulp ◽  
Pulp Mill ◽  
Water Systems ◽  
Kraft Pulp Mill

Occurrence of Various Off-Flavours in Fish in Finland from 1969 to 1981

1983 ◽  
Vol 15 (6-7) ◽  
pp. 47-58 ◽  
Author(s):  
T Kuusi ◽  
M Suihko
Keyword(s):  
Research Laboratory ◽  
Kraft Pulp ◽  
Pulp Mill ◽  
Northern Pike ◽  
Research Centre ◽  
Pulp Mill Effluent ◽  
Technical Research ◽  
Kraft Pulp Mill ◽  
Food Research ◽  
Numerical Scale

Off-flavours in fish were studied from 1969 to 1981 at the Food Research Laboratory of the Technical Research Centre of Finland using sensory methods. In all, 1982 samples of 18 species of Finnish fish, most of them suspected of being tainted, were studied. A trained taste panel scoring on a numerical scale of 0-10, where a score of 5 or less was unacceptable, was used. The off-flavours described were oil, kraft pulp mill effluent, sewage (musty), muddy, rancid, and others. Of all these samples, 34.9% were unacceptable. The most common off-flavour was kraft pulp mill effluent, present in 41.2 % of the unacceptable samples. In acceptable fish slight off-flavours were somet imes found. Of the muddy fish, only 35.2 % of the bream and 28.8 % of the northern pike were unacceptable. The panel was able to discriminate between the different off-flavours, but, in some cases, the boundaries were vague.

Characterization of odorous compounds from bleached kraft pulp mill effluent

1995 ◽  
Vol 31 (11) ◽  
pp. 35-40 ◽  
Author(s):  
B. G. Brownlee ◽  
S. L. Kenefick ◽  
G. A. MacInnis ◽  
S. E. Hrudey
Keyword(s):  
Gas Chromatography ◽  
Kraft Pulp ◽  
Pulp Mill ◽  
Dimethyl Disulfide ◽  
Gas Chromatography Mass Spectrometry ◽  
Pulp Mill Effluent ◽  
Kraft Pulp Mill ◽  
Bleached Kraft Pulp ◽  
Methyl Phenyl Sulfide ◽  
Library Spectrum

Odour compounds in extracts of bleached kraft pulp mill effluent (BKME) have been characterized by olfactory gas chromatography (OGC) and gas chromatography-mass spectrometry. A variety of sulfury odours was detected by OGC in addition to woody and pulp mill-like odours. Three sulfur compounds were identified by comparison of retention times and partial mass spectra with authentic standards: dimethyl disulfide, 3-methylthiophene and thioanisole (methyl phenyl sulfide). Typical concentrations in BKME were 1, 0.05, and 0.5 μg/l, respectively. Their odour intensity is relatively low and they were not detected by OGC. Dimethyl trisulfide was tentatively identified by comparison of its partial mass spectrum with a literature (library) spectrum. Its concentration in BKME was estimated at 0.5-2 μg/l. It corresponded to a skunky odour in the OGC profiles. Efforts to identify another odour peak, eluting just after 3-methylthiophene, with a pronounced alkyl sulfide odour were unsuccessful.

Growth responses of periphyton and chironomids exposed to biologically treated bleached kraft pulp mill effluent

1997 ◽  
Vol 35 (2-3) ◽  
pp. 339-345 ◽  
Author(s):  
M. G. Dubé ◽  
J. M. Culp
Keyword(s):  
Kraft Pulp ◽  
Pulp Mill ◽  
Pulp Mill Effluent ◽  
Growth Responses ◽  
High Concentration ◽  
Wood Extractives ◽  
Kraft Pulp Mill ◽  
Bleached Kraft Pulp ◽  
Low Levels ◽  
High Concentrations

Experiments were conducted in artificial streams to determine the effects of increasing concentrations of biologically treated bleached kraft pulp mill effluent (BKPME) on periphyton and chironomid growth in the Thompson River, British Columbia. Periphyton growth, as determined by increases in chlorophyll a, was significantly stimulated at all effluent concentrations tested (0.25%, 0.5%, 1.0%, 5.0% and, 10.0%). Chironomid growth (individual weight) was also significantly stimulated at low effluent concentrations (≤1.0%). At higher concentrations (5.0% and 10.0%), chironomid growth was inhibited relative to the 1.0% treatment streams. Increases in growth were attributed to the effects of nutrient and organic enrichment from BKPME. The effluent contained high concentrations of phosphorus and appears to be an important source of carbon for benthic insects grazing on the biofilm. In high concentration effluent streams, chironomid growth decreased despite low levels of typical pulp mill contaminants. This suggests that other compounds in the effluent, such as wood extractives, may be inhibiting chironomid growth. These results support findings of field monitoring studies conducted in the Thompson River where changes in periphyton and chironomid abundance occurred downstream of the bleached kraft pulp mill.

Sign in / Sign up

Export Citation Format

Share Document