Effect of hydrothermal treatment temperature on the catalytic performance of single-crystalline La0.5Sr0.5MnO3−δ microcubes for the combustion of toluene

2008 ◽  
Vol 139 (1-2) ◽  
pp. 82-87 ◽  
Author(s):  
Jiguang Deng ◽  
Yue Zhang ◽  
Hongxing Dai ◽  
Lei Zhang ◽  
Hong He ◽  
...  
Fermentation ◽  
2021 ◽  
Vol 7 (2) ◽  
pp. 81
Author(s):  
Hironaga Akita ◽  
Mohd Zulkhairi Mohd Yusoff ◽  
Shinji Fujimoto

Malaysia is the second largest palm oil producer and exporter globally. When crude palm oil is produced in both plantations and oil processing mills, a large amount of oil palm empty fruit bunch (OPEFB) is simultaneously produced as a waste product. Here, we describe the preparation of hydrolysate from OPEFB. After OPEFB was hydrothermally treated at 180–200 °C, the resultant liquid phase was subjected to high-performance liquid chromatography analysis, while the solid phase was used for acidic and enzymatic hydrolysis. Hemicellulose yield from the acid-treated solid phase decreased from 153 mg/g-OPEFB to 27.5 mg/g-OPEFB by increasing the hydrothermal treatment temperature from 180 to 200 °C. Glucose yield from the enzyme-treated solid phase obtained after hydrothermal treatment at 200 °C was the highest (234 ± 1.90 mg/g-OPEFB, 61.7% production efficiency). In contrast, xylose, mannose, galactose, and arabinose yields in the hydrolysate prepared from the solid phase hydrothermally treated at 200 °C were the lowest. Thus, we concluded that the optimum temperature for hydrothermal pretreatment was 200 °C, which was caused by the low hemicellulose yield. Based on these results, we have established an effective method for preparing OPEFB hydrolysates with high glucose content.


2021 ◽  
Vol 406 ◽  
pp. 126656
Author(s):  
Daihua He ◽  
Xuexian Zhang ◽  
Ping Liu ◽  
Xinkuan Liu ◽  
Xiaohong Chen ◽  
...  

2013 ◽  
Vol 634-638 ◽  
pp. 696-700
Author(s):  
Lin Jiu Xiao ◽  
Peng Li ◽  
Yong Gang Sheng

A series of Ti(SO4)2/γ-Al2O3 catalysts were prepared by impregnation method and the catalytic performance of these catalysts in 1-butene oligomerization was investigated. The heat treatment temperature played great influences on the catalytic performance of these catalysts in the oligomerization. 90.1 wt.% conversion of 1-butene and 92.2 wt.% selectivity of dimers were obtained on Ti(SO4)2/γ-Al2O3(450) catalyst at 80 °C, 1.0 Mpa and LHSV=0.6 h−1. The heat treatment temperature determined the crystallinity of TiOSO4 and specific surface area of these catalysts, which affected the catalytic performance of these catalysts in 1-butene oligomerization. In addition, the physicochemical properties of these catalysts were comparatively characterized by powder X-ray diffraction (XRD), N2 isothermal adsorption-desorption techniques.


2015 ◽  
Vol 815 ◽  
pp. 446-450
Author(s):  
Xing Ling Shi ◽  
Ling Li Xu ◽  
Guang Hong Zhou ◽  
Le Te Bang

Dental implant made of pure titanium (Ti) has become one important option to restore the function of lost tooth. However, because of insufficient hardness, it is always scratched during oral hygieneprocedures. To improve its surface hardness,titanium nitride (TiN) coating was prepared. Soft tissue - implant interface is important for blocking bacteria invasion, therefore surface modification is necessary to improve biocompatibility of TiN for fibroblasts.In the present study, TiN coating was modified by hydrothermal treatment incalcium acetate (CaAc) solution and effect of hydrothermal treatment temperature was studied. After treatment,calcium (Ca) wassuccessfully combined into TiN surface and the surface morphology, roughness and hardness were not changed below 140 °C. It is expected that, surface modification with Ca by hydrothermal treatment could made TiN a promising dental implant coating.


2004 ◽  
Vol 389 (1-3) ◽  
pp. 83-86 ◽  
Author(s):  
Zhong-Yong Yuan ◽  
Tie-Zhen Ren ◽  
Gaohui Du ◽  
Bao-Lian Su

2012 ◽  
Vol 573-574 ◽  
pp. 27-30
Author(s):  
Huan Bao Fa ◽  
Li Ping Zhang ◽  
Wei Yin ◽  
Jing Ting Zhou ◽  
Nan Nan Xu ◽  
...  

The monocarboxyphenyl cobalt porphyrin (CoMCPP) was synthesized and incorporated into carbon carrier acetylene black (ACET) for proton exchange membrane fuel cell cathode oxygen reduction. The influence of different thermal treatment temperature on the catalytic performance of the composite catalysts was discussed. The synthetic compound catalyst was analyzed by XRD、IR. The electrochemical catalytic performance of catalyst, which was heat-treated under different temperature, for oxygen reduction was tested by linear sweep voltammetry (LSV). The result shows that the best thermal treatment temperature is 6000C, and its catalytic activity also shows the best, the catalytic activity site changes from CoN4 to C-N-Co.


2015 ◽  
Vol 3 (39) ◽  
pp. 19669-19673 ◽  
Author(s):  
Chao Wang ◽  
Yongming Sui ◽  
Guanjun Xiao ◽  
Xinyi Yang ◽  
Yingjin Wei ◽  
...  

Single-crystalline Cu1.11Ir nanocages were synthesized, which exhibited high catalytic performance toward the oxygen evolution reaction in 0.05 M H2SO4.


Sign in / Sign up

Export Citation Format

Share Document