scholarly journals Capacitive deionization using nitrogen-doped mesostructured carbons for highly efficient brackish water desalination

2019 ◽  
Vol 362 ◽  
pp. 887-896 ◽  
Author(s):  
Xingtao Xu ◽  
Abeer Enaiet Allah ◽  
Chen Wang ◽  
Haibo Tan ◽  
Ahmed A. Farghali ◽  
...  
Author(s):  
Xue Song ◽  
Dezhi Fang ◽  
Silu Huo ◽  
Kexun Li

Capacitive deionization (CDI) was currently one of the most popular methods in the field of desalination, which performance highly depended on the electrode materials. It was vital significance to design...


Energies ◽  
2021 ◽  
Vol 14 (22) ◽  
pp. 7641
Author(s):  
Sadam-Hussain Soomro ◽  
Yusufu Abeid Chande Jande ◽  
Salman Memon ◽  
Woo-Seung Kim ◽  
Young-Deuk Kim

A hybrid capacitive deionization and humidification-dehumidification (CDI–HDH) desalination system is theoretically investigated for the desalination of brackish water. The CDI system works with two basic operations: adsorption and regeneration. During adsorption, water is desalted, and during the regeneration process the ions from electrodes are detached and flow out as wastewater, which is higher in salt concentration. This wastewater still contains water but cannot be treated again via the CDI unit because CDI cannot treat higher-salinity waters. The discarding of wastewater from CDI is not a good option, since every drop of water is precious. Therefore, CDI wastewater is treated using waste heat in a process that is less sensitive to high salt concentrations, such as humidification-dehumidification (HDH) desalination. Therefore, in this study, CDI wastewater was treated using the HDH system. Using the combined system (CDI–HDH), this study theoretically investigated brackish water of various salt concentrations and flow rates at the CDI inlet. A maximum distillate of 1079 L/day was achieved from the combined system and the highest recovery rate achieved was 24.90% from the HDH unit. Additionally, two renewable energy sources with novel ideas are recommended to power the CDI–HDH system.


2019 ◽  
Vol 6 (7) ◽  
pp. 1433-1437 ◽  
Author(s):  
Ziming Wang ◽  
Xingtao Xu ◽  
Jeonghun Kim ◽  
Victor Malgras ◽  
Ran Mo ◽  
...  

Metal–organic framework/polypyrrole hybrids are synthesized and directly used in capacitive deionization for the first time.


2015 ◽  
Vol 158 ◽  
pp. 403-409 ◽  
Author(s):  
Yong Liu ◽  
Taiqiang Chen ◽  
Ting Lu ◽  
Zhuo Sun ◽  
Daniel H.C. Chua ◽  
...  

Membranes ◽  
2020 ◽  
Vol 10 (5) ◽  
pp. 96 ◽  
Author(s):  
Gbenro Folaranmi ◽  
Mikhael Bechelany ◽  
Philippe Sistat ◽  
Marc Cretin ◽  
Francois Zaviska

Electrochemical water desalination has been a major research area since the 1960s with the development of capacitive deionization technique. For the latter, its modus operandi lies in temporary salt ion adsorption when a simple potential difference (1.0–1.4 V) of about 1.2 V is supplied to the system to temporarily create an electric field that drives the ions to their different polarized poles and subsequently desorb these solvated ions when potential is switched off. Capacitive deionization targets/extracts the solutes instead of the solvent and thus consumes less energy and is highly effective for brackish water. This paper reviews Capacitive Deionization (mechanism of operation, sustainability, optimization processes, and shortcomings) with extension to its counterparts (Membrane Capacitive Deionization and Flow Capacitive Deionization).


Sign in / Sign up

Export Citation Format

Share Document