Porous membrane host-derived in-situ polymer electrolytes with double-stabilized electrode interface enable long cycling lithium metal batteries

2022 ◽  
pp. 134471
Author(s):  
Yali Liu ◽  
Youlong Xu
Author(s):  
Meng Yao ◽  
Haitao Zhang ◽  
Kun Dong ◽  
Bosen Li ◽  
Chunxian Xing ◽  
...  

With the in situ polymerization of liquid crystal (LC), more free lithium ions are released, which enhances the performance of P-PLC-IL.


Polymers ◽  
2021 ◽  
Vol 13 (15) ◽  
pp. 2468
Author(s):  
Hui Zhan ◽  
Mengjun Wu ◽  
Rui Wang ◽  
Shuohao Wu ◽  
Hao Li ◽  
...  

Composite polymer electrolytes (CPEs) incorporate the advantages of solid polymer electrolytes (SPEs) and inorganic solid electrolytes (ISEs), which have shown huge potential in the application of safe lithium-metal batteries (LMBs). Effectively avoiding the agglomeration of inorganic fillers in the polymer matrix during the organic–inorganic mixing process is very important for the properties of the composite electrolyte. Herein, a partial cross-linked PEO-based CPE was prepared by porous vinyl-functionalized silicon (p-V-SiO2) nanoparticles as fillers and poly (ethylene glycol diacrylate) (PEGDA) as cross-linkers. By combining the mechanical rigidity of ceramic fillers and the flexibility of PEO, the as-made electrolyte membranes had excellent mechanical properties. The big special surface area and pore volume of nanoparticles inhibited PEO recrystallization and promoted the dissolution of lithium salt. Chemical bonding improved the interfacial compatibility between organic and inorganic materials and facilitated the homogenization of lithium-ion flow. As a result, the symmetric Li|CPE|Li cells could operate stably over 450 h without a short circuit. All solid Li|LiFePO4 batteries were constructed with this composite electrolyte and showed excellent rate and cycling performances. The first discharge-specific capacity of the assembled battery was 155.1 mA h g−1, and the capacity retention was 91% after operating for 300 cycles at 0.5 C. These results demonstrated that the chemical grafting of porous inorganic materials and cross-linking polymerization can greatly improve the properties of CPEs.


Author(s):  
Kuirong Deng ◽  
Tianyu Guan ◽  
Fuhui Liang ◽  
Xiaoqiong Zheng ◽  
Qingguang Zeng ◽  
...  

Solid-state lithium metal batteries (LMBs) assembled with polymer electrolytes (PEs) and lithium metal anodes are promising batteries owing to their enhanced safeties and ultrahigh theoretical energy densities. Nevertheless, polymer electrolytes...


2021 ◽  
Vol 37 ◽  
pp. 215-223
Author(s):  
Zhaolin Lv ◽  
Qian Zhou ◽  
Shu Zhang ◽  
Shanmu Dong ◽  
Qinglei Wang ◽  
...  

RSC Advances ◽  
2021 ◽  
Vol 11 (23) ◽  
pp. 14036-14046
Author(s):  
Binxuan Xie ◽  
Shimou Chen ◽  
Yong Chen ◽  
Lili Liu

The SGPE can achieve high performance and high safety features simultaneously.


2020 ◽  
Vol 7 (20) ◽  
pp. 2000830
Author(s):  
Sajid Hussain Siyal ◽  
Muhammad Sufyan Javed ◽  
Ashique Hussain Jatoi ◽  
Jin‐Le Lan ◽  
Yunhua Yu ◽  
...  

Physchem ◽  
2021 ◽  
Vol 1 (1) ◽  
pp. 26-44
Author(s):  
Chiara Ferrara ◽  
Riccardo Ruffo ◽  
Piercarlo Mustarelli

Extended interphases are playing an increasingly important role in electrochemical energy storage devices and, in particular, in lithium-ion and lithium metal batteries. With this in mind we initially address the differences between the concepts of interface and interphase. After that, we discuss in detail the mechanisms of solid electrolyte interphase (SEI) formation in Li-ion batteries. Then, we analyze the methods for interphase characterization, with emphasis put on in-situ and operando approaches. Finally, we look at the near future by addressing the issues underlying the lithium metal/electrolyte interface, and the emerging role played by the cathode electrolyte interphase when high voltage materials are employed.


Polymer ◽  
2021 ◽  
pp. 123695
Author(s):  
Yubing Chen ◽  
Guangping Chen ◽  
Chaoqun Niu ◽  
Wenyan Shang ◽  
Rentong Yu ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document