Tracking control with disturbance rejection of nonlinear fractional order fuzzy systems: Modified repetitive control approach

2021 ◽  
Vol 150 ◽  
pp. 111142
Author(s):  
Parvin Mahmoudabadi ◽  
Mahsan Tavakoli-Kakhki
2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Zafer Bingul ◽  
Oguzhan Karahan

Purpose The purpose of this paper is to address a fractional order fuzzy PID (FOFPID) control approach for solving the problem of enhancing high precision tracking performance and robustness against to different reference trajectories of a 6-DOF Stewart Platform (SP) in joint space. Design/methodology/approach For the optimal design of the proposed control approach, tuning of the controller parameters including membership functions and input-output scaling factors along with the fractional order rate of error and fractional order integral of control signal is tuned with off-line by using particle swarm optimization (PSO) algorithm. For achieving this off-line optimization in the simulation environment, very accurate dynamic model of SP which has more complicated dynamical characteristics is required. Therefore, the coupling dynamic model of multi-rigid-body system is developed by Lagrange-Euler approach. For completeness, the mathematical model of the actuators is established and integrated with the dynamic model of SP mechanical system to state electromechanical coupling dynamic model. To study the validness of the proposed FOFPID controller, using this accurate dynamic model of the SP, other published control approaches such as the PID control, FOPID control and fuzzy PID control are also optimized with PSO in simulation environment. To compare trajectory tracking performance and effectiveness of the tuned controllers, the real time validation trajectory tracking experiments are conducted using the experimental setup of the SP by applying the optimum parameters of the controllers. The credibility of the results obtained with the controllers tuned in simulation environment is examined using statistical analysis. Findings The experimental results clearly demonstrate that the proposed optimal FOFPID controller can improve the control performance and reduce reference trajectory tracking errors of the SP. Also, the proposed PSO optimized FOFPID control strategy outperforms other control schemes in terms of the different difficulty levels of the given trajectories. Originality/value To the best of the authors’ knowledge, such a motion controller incorporating the fractional order approach to the fuzzy is first time applied in trajectory tracking control of SP.


2020 ◽  
Vol 106 ◽  
pp. 97-108
Author(s):  
C. Antony Crispin Sweety ◽  
S. Mohanapriya ◽  
O.M. Kwon ◽  
R. Sakthivel

2013 ◽  
Vol 850-851 ◽  
pp. 868-871 ◽  
Author(s):  
Li Xin Yang ◽  
Wan Sheng He ◽  
Jin Ping Jia ◽  
Fan Di Zhang

In this paper, chaos synchronization of the modified Sprott E system is investigated. Based on the stability theorem for fractional systems, tracking control approach is used for the fractional-order systems with uncertain parameters. Meanwhile, suitable adaptive synchronization controller and recognizing rules of the uncertain parameters are designed. Numerical simulation results show that the method is easy to implement and reliable for synchronizing the two nonlinear fractional order hyper-chaotic systems.


2017 ◽  
Vol 40 (13) ◽  
pp. 3640-3650 ◽  
Author(s):  
Ujjwal Mondal ◽  
Anindita Sengupta ◽  
Naiwrita Dey

This paper is concerned with the development of a Modified Finite Dimensional Repetitive Control (MFDRC) system. Conventional FDRC is modified through parameterization of the controller using co-prime factorization. The proposed method of controller design specifies the input output characteristics beforehand, ensuring highly accurate tracking and disturbance rejection property of the system subjected to periodic reference input. Another problem is the stabilization issues in the input–output and the disturbance rejection characteristics of a conventional repetitive control system with respect to the periodic reference input owing to have infinite number of poles in the transfer function of it. It is desirable that the transfer functions from both the reference input and the disturbance to the output have a finite number of poles and that will be taken care of in the proposed scheme of MFDRC design depicted in this paper. The performance of designed controller has been validated in steps applied to a laboratory based servo system. Comparisons are done using conventional PID controller, FDRC-based PID controller and MFDRC to show advantage, disadvantage or limitation of applied control scheme.


2019 ◽  
Vol 92 ◽  
pp. 65-74 ◽  
Author(s):  
R. Sakthivel ◽  
K. Raajananthini ◽  
O.M. Kwon ◽  
S. Mohanapriya

IEEE Access ◽  
2018 ◽  
Vol 6 ◽  
pp. 49828-49837 ◽  
Author(s):  
R. sakthivel ◽  
R. Kavikumar ◽  
Yong-Ki Ma ◽  
Yong Ren ◽  
S. Marshal Anthoni

Sign in / Sign up

Export Citation Format

Share Document