Circulation of anodic effluent to the cathode chamber for subsequent treatment of wastewater in photosynthetic microbial fuel cell with generation of bioelectricity and algal biomass

Chemosphere ◽  
2021 ◽  
Vol 278 ◽  
pp. 130455
Author(s):  
Chamath D.Y. Yahampath Arachchige Don ◽  
Sandhya Babel
2013 ◽  
Vol 777 ◽  
pp. 92-95
Author(s):  
Wei Ping Liu ◽  
Xia Fei Yin

A continuous flow double chamber microbial fuel cell (MFC) for wastewater treatment was constructed. Anaerobic activated sludge was used as bacterial source and simulated organic wastewater was used as substrate. Effluent of anode chamber was used directly as influent of the cathode chamber. The aerobic microorganisms could degrade organic matters further. The electricity production and organic wastewater treatment of the MFC were studied. The results show that the wastewater chemical oxygen demand (COD) of the total removal rate was 74.1%~77.45%, the anode chamber in which the removal rate of COD is 32.2%~35.3%, and COD removal efficiency of aerobic biological treatment in the cathode chamber was 60.2%~66.7%. The continuous flow system could improve the removal rate further. The maximum current density of MFC was 1.56 mAm-2, the maximum output power was 24.336 mWm-2.


2008 ◽  
Vol 42 (22) ◽  
pp. 8578-8584 ◽  
Author(s):  
Jeffrey J. Fornero ◽  
Miriam Rosenbaum ◽  
Michael A. Cotta ◽  
Largus T. Angenent

2011 ◽  
Vol 189 (1-2) ◽  
pp. 186-192 ◽  
Author(s):  
Hu-Chun Tao ◽  
Min Liang ◽  
Wei Li ◽  
Li-Juan Zhang ◽  
Jin-Ren Ni ◽  
...  

2017 ◽  
Vol 7 ◽  
pp. 184798041772742 ◽  
Author(s):  
Yi-Ta Wang ◽  
Yuan-Kuo Wang

The bio-electron-Fenton system integrates microbial fuel cell and Fenton process into a single system to destroy the organic and bio-refractory contaminants in wastewater. Its performance is closely dependent on the sufficient electron supplement by the oxidation process in anode chamber and the reduction process in cathode chamber. This article presents a novel cathode of a bio-electron-Fenton system which can simultaneously achieve good electron supplement and the wastewater treatment in cathode chamber. The cathode consists of indium-tin-oxide conductive glass on which layers of graphene-poly(vinyl alcohol) composite are sprayed by electrospinning. The material characterization is verified by Fourier transform infrared spectroscopy, scanning electron microscopy, and transmission electron microscopy. The voltage, current, and power density of the system are verified by cyclic voltammetry. The wastewater treatment is verified by dye decolorization. With the addition ratio of 4 wt% graphene, the system achieves the optimal power density of 74.1 mW/m2, open-circuit voltage of 0.42 V, and the decolorization of reactive black 5 of 60.25%. By constant-resistance discharge testing within three-cycle, the system can stably supply a maximum voltage of 0.41 V or above. Hence, the proposed electrospun graphene-poly(vinyl alcohol) composite cathode electrode can not only improve the power-supply efficiency but also enhance the efficiency of wastewater treatment.


2020 ◽  
Vol 266 ◽  
pp. 115373
Author(s):  
Jafar Ali ◽  
Lei Wang ◽  
Hassan Waseem ◽  
Bo Song ◽  
Ridha Djellabi ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document