Mechanical properties and thermal aging behaviour of polyisoprene/polybutadiene/styrene-butadiene rubber ternary blend reinforced with carbon black

2016 ◽  
Vol 98 ◽  
pp. 126-133 ◽  
Author(s):  
Slaviša Jovanović ◽  
Suzana Samaržija-Jovanović ◽  
Gordana Marković ◽  
Vojislav Jovanović ◽  
Tijana Adamović ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Carbon Black ◽  
Thermal Aging ◽  
Styrene Butadiene Rubber ◽  
Ternary Blend ◽  
Butadiene Rubber ◽  
Styrene Butadiene

ULTRASONIC AIDED EXTRUSION OF CARBON BLACK-FILLEDSBR COMPOUNDS

2011 ◽  
Vol 84 (1) ◽  
pp. 55-73 ◽  
Author(s):  
Jaesun Choi ◽  
Avraam I. Isayev
Keyword(s):  
Mechanical Properties ◽  
Carbon Black ◽  
Styrene Butadiene Rubber ◽  
Strong Interactions ◽  
Butadiene Rubber ◽  
Single Screw Extrusion ◽  
Screw Extrusion ◽  
Tan Δ ◽  
Induction Times ◽  
Styrene Butadiene

Abstract Ultrasonically assisted single screw extrusion of carbon black (CB)-filled styrene–butadiene rubber (SBR) compounds up to 60 phr was carried out and its processing characteristics were measured. The effects of ultrasonic amplitude on rheology, extractable amount, vulcanization behavior, mechanical properties, abrasion, electrical resistivity, and morphology were investigated. Increasing ultrasonic amplitude led to a reduction of extractable content with the effect diminishing with increasing CB loading. Treated compounds showed an increase in viscosity at certain amplitudes. Cure curves revealed reduced induction times with increasing amplitude, except at the highest CB content. The maximum torque of the cure curve, crosslink density, and mechanical properties of vulcanizates all showed an increase at certain ultrasonic amplitudes. An increase in the glass transition temperature (Tg) and a decrease in tan δ at Tg were observed with increasing amplitude. Ultrasonically treated unfilled and CB-filled compounds led to vulcanizates with significant and slight improvements in abrasion, respectively. Ultrasonic treatment caused a significant reduction in the electrical percolation threshold of vulcanizates. Morphological study by atomic force microscope revealed a creation of unique CB agglomerates, suggesting the strong interactions between the SBR and CB aggregates in treated compounds, leading to reinforcing effects in vulcanizates.

Studies on Mechanical Properties and Dynamic Performance of SSBR/CB/Silica Composites

2016 ◽  
Vol 717 ◽  
pp. 52-56 ◽  
Author(s):  
Wei Liu ◽  
Lin Li ◽  
Bing Kai Han ◽  
Cheng Zhong Zong
Keyword(s):  
Mechanical Properties ◽  
Carbon Black ◽  
Dynamic Properties ◽  
Dynamic Performance ◽  
Styrene Butadiene Rubber ◽  
Butadiene Rubber ◽  
Hybrid Fillers ◽  
Two Component ◽  
Series Of Experiments ◽  
Styrene Butadiene

Carbon black ( CB ) and silica were used as two-component fillers to enhance the practicability of rubber. In this study, the microstructure, mechanical and dynamic properties of solution-polymerized styrene-butadiene rubber ( SSBR ) vulcanizates filled with carbon black and silica were characterized. 50 phr of total hybrid fillers was used as the base. A series of experiments with different ratios of CB/silica were carried out to determine the best contribution to the performance of SSBR vulcanizates. The studies have shown that when the vulcanizates exhibited the better overall mechanical and dynamic performance with 20 phr silica loading and 30 phr CB loading.

Sign in / Sign up

Export Citation Format

Share Document