Finite element prediction of resin pocket geometries around arbitrary inclusions in composites: Case study for an embedded optical fiber interrogator

2016 ◽  
Vol 146 ◽  
pp. 95-107 ◽  
Author(s):  
Nicolas Lammens ◽  
Geert Luyckx ◽  
Wim Van Paepegem ◽  
Joris Degrieck
2015 ◽  
Vol 132 ◽  
pp. 825-832 ◽  
Author(s):  
Nicolas Lammens ◽  
Geert Luyckx ◽  
Eli Voet ◽  
Wim Van Paepegem ◽  
Joris Degrieck

2016 ◽  
Vol 20 (3) ◽  
pp. 294-301 ◽  
Author(s):  
Qian Liu ◽  
Wanchun Wang ◽  
Andrew R. Thoreson ◽  
Chunfeng Zhao ◽  
Weihong Zhu ◽  
...  

2019 ◽  
Vol 19 (10) ◽  
pp. 2079-2095 ◽  
Author(s):  
Michele Perrotti ◽  
Piernicola Lollino ◽  
Nunzio Luciano Fazio ◽  
Mario Parise

Abstract. The stability of man-made underground cavities in soft rocks interacting with overlying structures and infrastructures represents a challenging problem to be faced. Based upon the results of a large number of parametric two-dimensional (2-D) finite-element analyses of ideal cases of underground cavities, accounting for the variability both cave geometrical features and rock mechanical properties, specific charts have been recently proposed in the literature to assess at a preliminary stage the stability of the cavities. The purpose of the present paper is to validate the efficacy of the stability charts through the application to several case studies of underground cavities, considering both quarries collapsed in the past and quarries still stable. The stability graphs proposed by Perrotti et al. (2018) can be useful to evaluate, in a preliminary way, a safety margin for cavities that have not reached failure and to detect indications of predisposition to local or general instability phenomena. Alternatively, for sinkholes that already occurred, the graphs may be useful in identifying the conditions that led to the collapse, highlighting the importance of some structural elements (as pillars and internal walls) on the overall stability of the quarry system.


2015 ◽  
Vol 19 (5) ◽  
pp. 563-570 ◽  
Author(s):  
Ridha Hambli ◽  
Sana Frikha ◽  
Hechmi Toumi ◽  
João Manuel R. S. Tavares

2021 ◽  
Author(s):  
Anthony Muff ◽  
Anders Wormsen ◽  
Torfinn Hørte ◽  
Arne Fjeldstad ◽  
Per Osen ◽  
...  

Abstract Guidance for determining a S-N based fatigue capacity (safe life design) for preloaded connectors is included in Section 5.4 of the 2019 edition of DNVGL-RP-C203 (C203-2019). This section includes guidance on the finite element model representation, finite element based fatigue analysis and determination of the connector design fatigue capacity by use of one of the following methods: Method 1 by FEA based fatigue analysis, Method 2 by FEA based fatigue analysis and experimental testing and Method 3 by full-scale connector fatigue testing. The FEA based fatigue analysis makes use of Appendix D.2 in C203-2019 (“S-N curves for high strength steel applications for subsea”). Practical use of Section 5.4 is illustrated with a case study of a fatigue tested wellhead profile connector segment test. Further developments of Section 5.4 of C203-2019 are proposed. This included acceptance criteria for use of a segment test to validate the FEA based fatigue analysis of a full-scale preloaded connector.


Sign in / Sign up

Export Citation Format

Share Document