Improved mechanical properties and piezoresistive sensitivity evaluation of MWCNTs reinforced cement mortars

2017 ◽  
Vol 144 ◽  
pp. 188-194 ◽  
Author(s):  
Yashavant V Jeevanagoudar ◽  
R. Hari Krishna ◽  
Raje Gowda ◽  
R. Preetham ◽  
R. Prabhakara
2020 ◽  
Vol 38 (3A) ◽  
pp. 335-342
Author(s):  
Layth Al-Gebory ◽  
Aseel B. Al‐Zubaidi ◽  
Ahmed A. Al‐Tabbakh

Manufacturing of building materials with unique properties is one of the most important key-parameters in the development of construction engineering and building materials. The development in the nanomaterials and nanotechnology can be utilized in this field. In this paper, production of eco-friendly, low water absorption and self-cleaning cement mortar reinforced with carbon nanotubes and nano-silica with different weight percentages (0.5%, 1.5%, and 2%) is performed. Results showed prominent improvement of hardness, compression strength and a decrease of water absorption and bending resistance in the reinforced cement mortars. The results show the possibility to control the mechanical properties of the cement mortars with minimal reinforcing agents provides the possibility to design these building materials for versatile applications.


2020 ◽  
Vol 38 (10A) ◽  
pp. 1522-1530
Author(s):  
Rawnaq S. Mahdi ◽  
Aseel B. AL-Zubidi ◽  
Hassan N. Hashim

This work reports on the incorporation of Flint and Kaolin rocks powders in the cement mortar in an attempt to improve its mechanical properties and produce an eco-friendly mortar. Flint and Kaolin powders are prepared by dry mechanical milling. The two powders are added separately to the mortars substituting cement partially. The two powders are found to improve the mechanical properties of the mortars. Hardness and compressive strength are found to increase with the increase of powders constituents in the cement mortars. In addition, the two powders affect water absorption and thermal conductivity of the mortar specimens which are desirable for construction applications. Kaolin is found to have a greater effect on the mechanical properties, water absorption, and thermal conductivity of the mortars than Flint. This behavior is discussed and analyzed based on the compositional and structural properties of the rocks powders.


2013 ◽  
Vol 592-593 ◽  
pp. 647-650 ◽  
Author(s):  
Małgorzata Lenart

Cement – polymer composites are nowadays widely used in repair systems not only in case of concrete or reinforced concrete constructions but also in masonry. Polymers addition for example already at 5% m.c. modifies the structure of the cement – polymer composite in a way that many of the mechanical properties such as flexural strength, tensile strength or adhesion to substrates are improved. The paper presents the results of tests such as flexural, compressive or adhesion strength to ceramic substrate of hardened cement mortars with different composition, as well as selected cement mortars modified by two polymers: polyvinyl alcohol and styrene – butadiene polymer dosed at 5 % m.c. Four types of cement mortars modified by lime (component used in historical constructions as well as in contemporary masonry mortars) are also examined for comparison.


Sign in / Sign up

Export Citation Format

Share Document