Investigation of long-term tension stiffening mechanism for ultra-high-performance fiber reinforced concrete (UHPFRC)

2022 ◽  
Vol 321 ◽  
pp. 126310
Author(s):  
Mohammad Momeen Ul Islam
2018 ◽  
Vol 2018 ◽  
pp. 1-8 ◽  
Author(s):  
Song Han ◽  
Yefu Cui ◽  
Hanfeng Huang ◽  
Mingzhe An ◽  
Ziruo Yu

The effect of curing conditions on the early age and long-term shrinkage of ultra high-performance fiber-reinforced concrete (UHPFRC) was systematically studied. The shrinkage of the early age (0–168 h) and long-term age (0–90 d) of UHPFRC material was measured based on three kinds of humidity conditions (dry, sealed, and soaked) and curing temperatures (25°C, 40°C, and 75°C), respectively. In this paper, the hydration degree of different shrinkage stages was studied in combination with chemical-bound water experiment. Meanwhile, the influencing mechanism of curing condition on the shrinkage of UHPFRC was analyzed. The results show that the early shrinkage rate of UHPFRC is accelerated with the increase of temperature, and the rate of shrinkage development at the latter stage is suppressed with the increase of temperature. With the increase of humidity, the early age shrinkage of UHPFRC and its increasing rate gradually decrease, which means drying condition > sealing condition > soaking condition. According to the long-term shrinkage results, increasing temperature has very significant inhibiting effect on the UHPFRC shrinkage in the sealed condition. Due to the majority of the in-site components of UHPFRC cured in the sealed condition, high-temperature curing has evident inhibition of early age shrinkage of UHPFRC. Therefore, promoting curing temperature is fairly effective at inhibiting the early age shrinkage of UHPFRC for the in-site structures.


Author(s):  
Igor Chilin ◽  

Приведены результаты исследований и выполнена оценка влияния технологических факторов на реологические свойства самоуплотняющихся сталефибробетонных смесей, определены кратковременные и длительные физико-механические и деформативные характеристики сверхвысокопрочного сталефибробетона, включая определение его фактической морозостойкости.


Buildings ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 63
Author(s):  
Anna L. Mina ◽  
Michael F. Petrou ◽  
Konstantinos G. Trezos

The scope of this paper is to investigate the performance of ultra-high performance fiber reinforced concrete (UHPFRC) concrete slabs, under projectile impact. Mixture performance under impact loading was examined using bullets with 7.62 mm diameter and initial velocity 800 m/s. The UHPFRC, used in this study, consists of a combination of steel fibers of two lengths: 6 mm and 13 mm with the same diameter of 0.16 mm. Six composition mixtures were tested, four UHPFRC, one ultra-high performance concrete (UHPC), without steel fibers, and high strength concrete (HSC). Slabs with thicknesses of 15, 30, 50, and 70 mm were produced and subjected to real shotgun fire in the field. Penetration depth, material volume loss, and crater diameter were measured and analyzed. The test results show that the mixture with a combination of 3% 6 mm and 3% of 13 mm length of steel fibers exhibited the best resistance to projectile impact and only the slabs with 15 mm thickness had perforation. Empirical models that predict the depth of penetration were compared with the experimental results. This material can be used as an overlay to buildings or to construct small precast structures.


Sign in / Sign up

Export Citation Format

Share Document