Numerical study on the bubble rising behavior in liquid oxygen under magnetic field

Cryogenics ◽  
2019 ◽  
Vol 101 ◽  
pp. 43-52
Author(s):  
Rui-Ping Zhang ◽  
Shi-Ran Bao ◽  
Chen-Jie Gu ◽  
Li-Min Qiu ◽  
Xiao-Qin Zhi ◽  
...  
Fluids ◽  
2020 ◽  
Vol 5 (2) ◽  
pp. 88
Author(s):  
Yutaro Furuichi ◽  
Toshio Tagawa

Nowadays, the use of baffle plates is anticipated to be one of potential devices used to dampen the sloshing of propellant in rocket tanks. However, some of previous studies reported that the use of a baffle plate may cause larger pressure fluctuations in the tank. In this study, aiming at damping the sloshing without a baffle plate, we paid attention to the characteristic that liquid oxygen is paramagnetic and numerically investigated damping effect of a magnetic field when liquid oxygen sloshing occurs. An incompressible gas–liquid two-phase flow of gaseous oxygen and liquid oxygen was assumed in a spherical spacecraft tank with a diameter of 1 m in a non-gravitational field, and a triangular impact force was assumed to be imposed as the excitation force. In addition, an electric circular coil was placed outside the spherical tank to generate a static magnetic field. For the sake of simplicity, the effect of heat was not taken into consideration. As a result of computation, the sloshing was damped to a certain extent when the magnetic flux density at the coil center was 1.0 T, and a sufficient damping effect was obtained by setting it to 3.0 T. In fact, it is anticipated that less than 3.0 T is sufficient if the coil is placed on the tank surface. This may contribute to damping of the movement of the center of gravity of a spacecraft and prevention of mixing of ullage gas into the piping.


2010 ◽  
Vol 46 (4) ◽  
pp. 393-402 ◽  
Author(s):  
F. Mokhtari ◽  
A. Bouabdallah ◽  
A. Merah ◽  
S. Hanchi ◽  
A. Alemany

Author(s):  
Alexander Vakhrushev ◽  
Abdellah Kharicha ◽  
Ebrahim Karimi-Sibaki ◽  
Menghuai Wu ◽  
Andreas Ludwig ◽  
...  

AbstractA numerical study is presented that deals with the flow in the mold of a continuous slab caster under the influence of a DC magnetic field (electromagnetic brakes (EMBrs)). The arrangement and geometry investigated here is based on a series of previous experimental studies carried out at the mini-LIMMCAST facility at the Helmholtz-Zentrum Dresden-Rossendorf (HZDR). The magnetic field models a ruler-type EMBr and is installed in the region of the ports of the submerged entry nozzle (SEN). The current article considers magnet field strengths up to 441 mT, corresponding to a Hartmann number of about 600, and takes the electrical conductivity of the solidified shell into account. The numerical model of the turbulent flow under the applied magnetic field is implemented using the open-source CFD package OpenFOAM®. Our numerical results reveal that a growing magnitude of the applied magnetic field may cause a reversal of the flow direction at the meniscus surface, which is related the formation of a “multiroll” flow pattern in the mold. This phenomenon can be explained as a classical magnetohydrodynamics (MHD) effect: (1) the closure of the induced electric current results not primarily in a braking Lorentz force inside the jet but in an acceleration in regions of previously weak velocities, which initiates the formation of an opposite vortex (OV) close to the mean jet; (2) this vortex develops in size at the expense of the main vortex until it reaches the meniscus surface, where it becomes clearly visible. We also show that an acceleration of the meniscus flow must be expected when the applied magnetic field is smaller than a critical value. This acceleration is due to the transfer of kinetic energy from smaller turbulent structures into the mean flow. A further increase in the EMBr intensity leads to the expected damping of the mean flow and, consequently, to a reduction in the size of the upper roll. These investigations show that the Lorentz force cannot be reduced to a simple damping effect; depending on the field strength, its action is found to be topologically complex.


Sign in / Sign up

Export Citation Format

Share Document