Hot Hole Direct Photoelectrochemistry of Au NPs: Interband versus Intraband hot carriers

2021 ◽  
pp. 139746
Author(s):  
Sudip Saha ◽  
Jie Yang ◽  
S. Shayan Mousavi Masouleh ◽  
G.A. Botton ◽  
Leyla Soleymani
Keyword(s):  
Hot Carriers ◽  
Au Nps

Tuning the Photocatalytic Performance of Plasmonic Nanocomposites (ZnO/Aux) Driven in Visible Light

2019 ◽  
Vol 8 (1) ◽  
pp. 56-61
Author(s):  
Aneeya K. Samantara ◽  
Debasrita Dash ◽  
Dipti L. Bhuyan ◽  
Namita Dalai ◽  
Bijayalaxmi Jena
Keyword(s):  
Electron Transfer ◽  
Photocatalytic Activity ◽  
Visible Light ◽  
Transfer Rate ◽  
Photocatalytic Performance ◽  
Light Exposure ◽  
Au Nanoparticle ◽  
Electron Transfer Rate ◽  
Au Nps ◽  
Zno Nanostructure

: In this article, we explored the possibility of controlling the reactivity of ZnO nanostructures by modifying its surface with gold nanoparticles (Au NPs). By varying the concentration of Au with different wt% (x = 0.01, 0.05, 0.08, 1 and 2), we have synthesized a series of (ZnO/Aux) nanocomposites (NCs). A thorough investigation of the photocatalytic performance of different wt% of Au NPs on ZnO nanosurface has been carried out. It was observed that ZnO/Au0.08 nanocomposite showed the highest photocatalytic activity among all concentrations of Au on the ZnO surface, which degrades the dye concentration within 2 minutes of visible light exposure. It was further revealed that with an increase in the size of plasmonic nanoparticles beyond 0.08%, the accessible surface area of the Au nanoparticle decreases. The photon absorption capacity of Au nanoparticle decreases beyond 0.08% resulting in a decrease in electron transfer rate from Au to ZnO and a decrease of photocatalytic activity. Background: Due to the industrialization process, most of the toxic materials go into the water bodies, affecting the water and our ecological system. The conventional techniques to remove dyes are expensive and inefficient. Recently, heterogeneous semiconductor materials like TiO2 and ZnO have been regarded as potential candidates for the removal of dye from the water system. Objective: To investigate the photocatalytic performance of different wt% of Au NPs on ZnO nanosurface and the effect of the size of Au NPs for photocatalytic performance in the degradation process. Methods: A facile microwave method has been adopted for the synthesis of ZnO nanostructure followed by a reduction of gold salt in the presence of ZnO nanostructure to form the composite. Results: ZnO/Au0.08 nanocomposite showed the highest photocatalytic activity which degrades the dye concentration within 2 minutes of visible light exposure. The schematic mechanism of electron transfer rate was discussed. Conclusion: Raspberry shaped ZnO nanoparticles modified with different percentages of Au NPs showed good photocatalytic behavior in the degradation of dye molecules. The synergetic effect of unique morphology of ZnO and well anchored Au nanostructures plays a crucial role.

scholarly journals Easy and fast in-situ functionalization of exfoliated 2D black phosphorus with gold nanoparticles

2021 ◽  
Author(s):  
Salvatore Moschetto ◽  
Andrea Ienco ◽  
Gabriele Manca ◽  
Manuel Serrano-Ruiz ◽  
Maurizio Peruzzini ◽  
...  
Keyword(s):  
Gold Nanoparticles ◽  
Black Phosphorus ◽  
Au Nps ◽  
In Situ Functionalization

Heterostructures of single- and few-layer black phosphorus (2D bP) functionalized with gold nanoparticles (Au NPs) have been recently reported in the literature, exploiting their intriguing properties and biocompatibility for catalytic,...

scholarly journals Continuous citrate‐capped gold nanoparticle synthesis in a two‐phase flow reactor

2021 ◽  
Author(s):  
Spyridon Damilos ◽  
Ioannis Alissandratos ◽  
Luca Panariello ◽  
Anand N. P. Radhakrishnan ◽  
Enhong Cao ◽  
...  
Keyword(s):  
Particle Size ◽  
Gold Nanoparticles ◽  
Residence Time ◽  
Flow Reactor ◽  
Phase Flow ◽  
Continuous Manufacturing ◽  
Two Phase ◽  
Process Yield ◽  
Au Nps ◽  
Manufacturing Platform

AbstractA continuous manufacturing platform was developed for the synthesis of aqueous colloidal 10–20 nm gold nanoparticles (Au NPs) in a flow reactor using chloroauric acid, sodium citrate and citric acid at 95 oC and 2.3 bar(a) pressure. The use of a two-phase flow system – using heptane as the continuous phase – prevented fouling on the reactor walls, while improving the residence time distribution. Continuous syntheses for up to 2 h demonstrated its potential application for continuous manufacturing, while live quality control was established using online UV-Vis photospectrometry that monitored the particle size and process yield. The synthesis was stable and reproducible over time for gold precursor concentration above 0.23 mM (after mixing), resulting in average particle size between 12 and 15 nm. A hydrophobic membrane separator provided successful separation of the aqueous and organic phases and collection of colloidal Au NPs in flow. Process yield increased at higher inlet flow rates (from 70 % to almost 100 %), due to lower residence time of the colloidal solution in the separator resulting in less fouling in the PTFE membrane. This study addresses the challenges for the translation of the synthesis from batch to flow and provides tools for the development of a continuous manufacturing platform for gold nanoparticles.Graphical abstract

Sol-gel and SPS combined synthesis of highly porous wollastonite ceramic materials with immobilized Au-NPs

2017 ◽  
Vol 43 (11) ◽  
pp. 8509-8516 ◽  
Author(s):  
E.K. Papynov ◽  
O.O. Shichalin ◽  
V.Yu. Mayorov ◽  
E.B. Modin ◽  
A.S. Portnyagin ◽  
...  
Keyword(s):  
Sol Gel ◽  
Ceramic Materials ◽  
Au Nps ◽  
Highly Porous

scholarly journals Hot-carriers in organic photovoltaics

2021 ◽  
Vol 93 (2) ◽  
pp. 223-230
Author(s):  
Palas Roy
Keyword(s):  
Organic Photovoltaics ◽  
Excess Energy ◽  
Charge Carriers ◽  
Hot Carriers ◽  
Hot Carrier ◽  
Improve Efficiency ◽  
Coulombic Attraction ◽  
Carrier Escape

Abstract Photogenerated charge carriers in organic photovoltaics (OPVs) suffer relaxation and recombination losses. However, extracting these carriers at higher energy (‘Hot-carriers’) has been found to be effective to overcome such loss pathways and improve efficiency of OPVs. Excess energy and long delocalization length promotes hot-carrier escape from Coulombic attraction and dissociation into free charges. Here, I have reviewed the ways to generate hot-carriers and their extraction in organic backbones. In-depth understanding of their energetics and dynamics will help designing hot-carrier photovoltaics.

scholarly journals Synthesis of Densely Immobilized Gold-Assembled Silica Nanostructures

2021 ◽  
Vol 22 (5) ◽  
pp. 2543
Author(s):  
Bomi Seong ◽  
Sungje Bock ◽  
Eunil Hahm ◽  
Kim-Hung Huynh ◽  
Jaehi Kim ◽  
...  
Keyword(s):  
Potential Method ◽  
Sers Substrate ◽  
Chloroauric Acid ◽  
Au Nps ◽  
Sio2 Surface ◽  
Color Changes ◽  
Surface Enhanced Raman ◽  
Nanoparticle Preparation ◽  
Enhanced Raman Scattering ◽  
20 Nm

In this study, dense gold-assembled SiO2 nanostructure (SiO2@Au) was successfully developed using the Au seed-mediated growth. First, SiO2 (150 nm) was prepared, modified by amino groups, and incubated by gold nanoparticles (ca. 3 nm Au metal nanoparticles (NPs)) to immobilize Au NPs to SiO2 surface. Then, Au NPs were grown on the prepared SiO2@Au seed by reducing chloroauric acid (HAuCl4) by ascorbic acid (AA) in the presence of polyvinylpyrrolidone (PVP). The presence of bigger (ca. 20 nm) Au NPs on the SiO2 surface was confirmed by transmittance electronic microscopy (TEM) images, color changes to dark blue, and UV-vis spectra broadening in the range of 450 to 750 nm. The SiO2@Au nanostructure showed several advantages compared to the hydrofluoric acid (HF)-treated SiO2@Au, such as easy separation, surface modification stability by 11-mercaptopundecanoic acid (R-COOH), 11-mercapto-1-undecanol (R-OH), and 1-undecanethiol (R-CH3), and a better peroxidase-like catalysis activity for 5,5′-Tetramethylbenzidine (TMB) and hydrogen peroxide (H2O2) reaction. The catalytic activity of SiO2@Au was two times better than that of HF-treated SiO2@Au. When SiO2@Au nanostructure was used as a surface enhanced Raman scattering (SERS) substrate, the signal of 4-aminophenol (4-ATP) on the surface of SiO2@Au was also stronger than that of HF-treated SiO2@Au. This study provides a potential method for nanoparticle preparation which can be replaced for Au NPs in further research and development.

Macroscopical monolayer films of ordered arrays of gold nanoparticles as SERS substrates for in-situ quantitative detection in aqueous solutions

Nanoscale ◽  
2021 ◽  
Author(s):  
Lixiang Xing ◽  
Cui Wang ◽  
Yi Cao ◽  
Jihui Zhang ◽  
Haibing Xia
Keyword(s):  
Gold Nanoparticles ◽  
Volume Fraction ◽  
Water Volume ◽  
Quantitative Detection ◽  
Monolayer Films ◽  
Au Nps ◽  
Sers Substrates ◽  
Ordered Arrays ◽  
Water Volume Fraction

In this work, macroscopical monolayer films of ordered arrays of gold nanoparticles (MMF-OA-Au NPs) are successfully prepared at the interfaces of toluene-diethylene glycol (DEG) with a water volume fraction of...

scholarly journals Fabrication and Application of SERS-Active Cellulose Fibers Regenerated from Waste Resource

Polymers ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 2142
Author(s):  
Shengjun Wang ◽  
Jiaqi Guo ◽  
Yibo Ma ◽  
Alan X. Wang ◽  
Xianming Kong ◽  
...  
Keyword(s):  
Au Nanoparticles ◽  
Cellulose Fiber ◽  
Cellulose Fibers ◽  
Regenerated Cellulose ◽  
Sers Substrate ◽  
Au Nps ◽  
Convenient Approach ◽  
Theoretical Simulations ◽  
Difference Time ◽  
Raman Probe

The flexible SERS substrate were prepared base on regenerated cellulose fibers, in which the Au nanoparticles were controllably assembled on fiber through electrostatic interaction. The cellulose fiber was regenerated from waste paper through the dry-jet wet spinning method, an eco-friendly and convenient approach by using ionic liquid. The Au NPs could be controllably distributed on the surface of fiber by adjusting the conditions during the process of assembling. Finite-difference time-domain theoretical simulations verified the intense local electromagnetic fields of plasmonic composites. The flexible SERS fibers show excellent SERS sensitivity and adsorption capability. A typical Raman probe molecule, 4-Mercaptobenzoicacid (4-MBA), was used to verify the SERS cellulose fibers, the sensitivity could achieve to 10−9 M. The flexible SERS fibers were successfully used for identifying dimetridazole (DMZ) from aqueous solution. Furthermore, the flexible SERS fibers were used for detecting DMZ from the surface of fish by simply swabbing process. It is clear that the fabricated plasmonic composite can be applied for the identifying toxins and chemicals.

Sign in / Sign up

Export Citation Format

Share Document