Investigation of liquid desiccant regenerator with fixed-plate heat recovery system

Energy ◽  
2017 ◽  
Vol 137 ◽  
pp. 172-182 ◽  
Author(s):  
Suping Shen ◽  
Wenjian Cai ◽  
Xinli Wang ◽  
Qiong Wu ◽  
Haoren Yon
2018 ◽  
Vol 7 (2.12) ◽  
pp. 136
Author(s):  
Chan JungKim ◽  
Sank Wook-Han ◽  
Ki Hyun Kim ◽  
Moo Yeon Lee ◽  
Gee Soo Lee

Background/Objectives: To meet the regulations for the fuel economy, an EHRS (Exhaust gas Heat Recovery System, which was installed within the vehicle exhaust system and recovered the heat from the exhaust gas, were needed. The EHRS enabled the engine to achieve the fast warm-up performance for reducing friction loss during the cold start.The objective of this paper was to investigate the effects of the design parameters of the EHRS with a plate heat exchanger on the warm-up performance of a gasoline engine.Methods/Statistical analysis: The EHRS with the plate heat exchanger was manufactured and installed behind the catalyst in the exhaust system of the gasoline direct injection engine. The experimental study and multi-disciplinary analysis were carried out to investigate the effects of the EHRS on the warm-up performance of the engine, such as the coolant temperature, the exhaust gas temperature and the recovery heat at idle condition and the step-load condition.Findings: Because the recovery of heat was about 1. 7 kW at idle condition, the effect of the EHRS on the warm-up performance was negligible. However, due to 17.2 kW of the recovery of heat at the stepload condition of T=140 Nm at N=2,400 rpm, the EHRS enabled to shorten the warm-up time by 548 s comparison that of the base engine.Improvements/Applications: The fuel economy will be expected to be improved through an EHRS, which provides the improved combustion in the warm-up phase and a decrease in friction loss.  


2019 ◽  
Vol 14 (1) ◽  
Author(s):  
Gunabal S

Waste heat recovery systems are used to recover the waste heat in all possible ways. It saves the energy and reduces the man power and materials. Heat pipes have the ability to improve the effectiveness of waste heat recovery system. The present investigation focuses to recover the heat from Heating, Ventilation, and Air Condition system (HVAC) with two different working fluids refrigerant(R410a) and nano refrigerant (R410a+Al2O3). Design of experiment was employed, to fix the number of trials. Fresh air temperature, flow rate of air, filling ratio and volume of nano particles are considered as factors. The effectiveness is considered as response. The results were analyzed using Response Surface Methodology


Sign in / Sign up

Export Citation Format

Share Document