Effect of cyclic loading on monotonic shear strength of fine-grained soils

2007 ◽  
Vol 89 (3-4) ◽  
pp. 243-257 ◽  
Author(s):  
Ayfer Erken ◽  
B.M. Can Ulker
Keyword(s):  
Shear Strength ◽  
Cyclic Loading ◽  
Fine Grained

Residual shear strength of fine-grained soils and soil–solid interfaces at low effective normal stresses

2015 ◽  
Vol 52 (2) ◽  
pp. 198-210 ◽  
Author(s):  
Hisham T. Eid ◽  
Ruslan S. Amarasinghe ◽  
Khaled H. Rabie ◽  
Dharma Wijewickreme
Keyword(s):  
Shear Strength ◽  
Large Strain ◽  
Laboratory Research ◽  
Normal Stresses ◽  
Interface Shear ◽  
Residual Shear Strength ◽  
Fine Grained ◽  
Solid Interface ◽  
Wide Range ◽  
Shear Area

A laboratory research program was undertaken to study the large-strain shear strength characteristics of fine-grained soils under low effective normal stresses (∼3–7 kPa). Soils that cover a wide range of plasticity and composition were utilized in the program. The interface shear strength of these soils against a number of solid surfaces having different roughness was also investigated at similar low effective normal stress levels. The findings contribute to advancing the knowledge of the parameters needed for the design of pipelines placed on sea beds and the stability analysis of shallow soil slopes. A Bromhead-type torsional ring-shear apparatus was modified to suit measuring soil–soil and soil–solid interface residual shear strengths at the low effective normal stresses. In consideration of increasing the accuracy of assessment and depicting the full-scale field behavior, the interface residual shear strengths were also measured using a macroscale interface direct shear device with a plan interface shear area of ∼3.0 m2. Correlations are developed to estimate the soil–soil and soil–solid interface residual shear strengths at low effective normal stresses. The correlations are compared with soil–soil and soil–solid interface drained residual shear strengths and correlations presented in the literature.

scholarly journals Microstructure and mechanical properties of an ultrasonic spot welded aluminum alloy: the effect of welding energy

2021 ◽  
Author(s):  
He Peng ◽  
Daolun Chen ◽  
Xianquan Jiang
Keyword(s):  
Shear Strength ◽  
Aluminum Alloy ◽  
Cyclic Loading ◽  
Crack Growth ◽  
Failure Mode ◽  
Spot Welding ◽  
Energy Levels ◽  
Lap Shear Strength ◽  
Pull Out ◽  
Lap Shear

The aim of this study is to evaluate the microstructures, tensile lap shear strength, and fatigue resistance of 6022-T43 aluminum alloy joints welded via a solid-state welding technique–ultrasonic spot welding (USW)–at different energy levels. An ultra-fine necklace-like equiaxed grain structure is observed along the weld line due to the occurrence of dynamic crystallization, with smaller grain sizes at lower levels of welding energy. The tensile lap shear strength, failure energy, and critical stress intensity of the welded joints first increase, reach their maximum values, and then decrease with increasing welding energy. The tensile lap shear failure mode changes from interfacial fracture at lower energy levels, to nugget pull-out at intermediate optimal energy levels, and to transverse through-thickness (TTT) crack growth at higher energy levels. The fatigue life is longer for the joints welded at an energy of 1400 J than 2000 J at higher cyclic loading levels. The fatigue failure mode changes from nugget pull-out to TTT crack growth with decreasing cyclic loading for the joints welded at 1400 J, while TTT crack growth mode remains at all cyclic loading levels for the joints welded at 2000 J. Fatigue crack basically initiates from the nugget edge, and propagates with “river-flow” patterns and characteristic fatigue striations. Keywords: aluminum alloy; ultrasonic spot welding; EBSD; microstructure; tensile strength; fatigue

scholarly journals Influence of Maximum Particle Diameter on the Mechanical Behavior of Soil-Rock Mixtures

2020 ◽  
Vol 2020 ◽  
pp. 1-9
Author(s):  
Zhuoling He ◽  
Junyun Zhang ◽  
Tao Sun
Keyword(s):  
Shear Strength ◽  
Large Scale ◽  
Direct Shear Test ◽  
Shear Test ◽  
Particle Diameter ◽  
Size Difference ◽  
Direct Shear ◽  
Fine Grained ◽  
Fine Grained Soil ◽  
Maximum Particle

With the steady development of the development of the western region in China, the construction of mountain highways has developed rapidly, and the soil-rock mixed filler, as an excellent filler, is widely used in the subgrade filling of mountain highways. Unlike ordinary fine-grained soil, the source of the soil-rock mixtures (S-RMs) is not unique, and the particle size difference is large and the water content is not uniform, resulting in very complicated mechanical properties. But the current highway embankment codes are still mainly established on the fine-grained soil. It is not fully applicable to soil-rock filled embankment. Based on soil-rock filled embankment engineering practice, this research uses a large-scale direct shear test to research the mechanical characteristics of the S-RMs with different maximum particle diameters. According to the large-scale direct shear test of S-RMs with different maximum particle diameters, the shear displacement vs shear stress curve, shear dilation, and strength characteristics with maximum particle diameter were analyzed. Results demonstrate that whether secondary hardening occurs mainly depends on the normal stress and the maximum particle diameter of the filler. At different maximum particle diameters, the horizontal displacement vs vertical displacement curves of the S-RMs can be roughly divided into continuous shearing and beginning of shearing and quick dilation. And the shear strength increases with the increase of the maximum particle diameter. Moreover, the cohesion decreases first and then increases with the increase of the maximum particle diameter, and the internal friction angle increases with the increase of the maximum particle diameter. Therefore, some RBs with large particle diameter added to filler can effectively improve the shear strength of the S-RMs, which may be valuable for realistic engineering.

Sign in / Sign up

Export Citation Format

Share Document