Form finding of corrugated shell structures for seismic design and validation using non-linear pushover analysis

2019 ◽  
Vol 181 ◽  
pp. 362-373 ◽  
Author(s):  
Tim Michiels ◽  
Sigrid Adriaenssens ◽  
Matthew Dejong
Keyword(s):  
Seismic Design ◽  
Pushover Analysis ◽  
Shell Structures ◽  
Form Finding ◽  
Corrugated Shell ◽  
Non Linear

PERILAKU STRUKTUR BAJA TIPE MRF DENGAN BEBAN LATERAL BERDASARKAN SNI 1726-2012 DAN METODE PERFORMANCE BASED PLASTIC DESIGN (PBPD)

2014 ◽  
Vol 13 (1) ◽  
Author(s):  
Nidiasari Jati Sunaryati Eem Ikhsan
Keyword(s):  
Pushover Analysis ◽  
Time History ◽  
Time History Analysis ◽  
Plastic Design ◽  
History Analysis ◽  
Non Linear ◽  
Static Pushover Analysis

Struktur rangka baja pemikul momen merupakan jenis struktur baja tahan gempa yang populer digunakan. Daktilitas struktur yang tinggi merupakan salah satu keunggulan struktur ini, sehingga mampu menahan deformasi inelastik yang besar. Dalam desain, penggunaan metode desain elastis berupa evaluasi non-linear static (Pushover analysis) maupun evaluasi non-linear analisis (Time History Analysis) masih digunakan sebagai dasar perencanaan meskipun perilaku struktur sebenarnya saat kondisi inelastik tidak dapat digambarkan dengan baik. Metode Performance-Based Plastic Design (PBPD) berkembang untuk melihat perilaku struktur sebenarnya dengan cara menetapkan terlebih dahulu simpangan dan mekanisme leleh struktur sehingga gaya geser dasar yang digunakan adalah sama dengan usaha yang dibutuhkan untuk mendorong struktur hingga tercapai simpangan yang telah direncanakan. Studi dilakukan terhadap struktur baja 5 lantai yang diberi beban gempa berdasarkan SNI 1726, 2012 dan berdasarkan metode PBPD. Hasil analisa menunjukkan bahwa struktur yang diberi gaya gempa berdasarkan metode PBPD mencapai simpangan maksimum sesuai simpangan rencana dan kinerja struktur yang dihasilkan lebih baik .

scholarly journals Shell-supported footbridges

2020 ◽  
Vol 7 (1) ◽  
pp. 199-214
Author(s):  
Luigi Fenu ◽  
Eleonora Congiu ◽  
Giuseppe Carlo Marano ◽  
Bruno Briseghella
Keyword(s):  
Topology Optimization ◽  
High Efficiency ◽  
Shell Structures ◽  
Form Finding ◽  
Fundamental Research ◽  
Spring System ◽  
Earthquake Action ◽  
Concrete Shell ◽  
Concrete Shells ◽  
Thrust Network Analysis

AbstractArchitects and engineers have been always attracted by concrete shell structures due to their high efficiency and plastic shapes. In this paper the possibility to use concrete shells to support footbridges is explored. Starting from Musmeci’s fundamental research and work in shell bridge design, the use of numerical form-finding methods is analysed. The form-finding of a shell-supported footbridge shaped following Musmeci’s work is first introduced. Coupling Musmeci’s and Nervi’s experiences, an easy construction method using a stay-in-place ferrocement formwork is proposed. Moreover, the advantage of inserting holes in the shell through topology optimization to remove less exploited concrete has been considered. Curved shell-supported footbridges have been also studied, and the possibility of supporting the deck with the shell top edge, that is along a single curve only, has been investigated. The form-finding of curved shell-supported footbridges has been performed using a Particle-Spring System and Thrust Network Analysis. Finally, the form-finding of curved shell-supported footbridges subjected to both vertical and horizontal forces (i.e. earthquake action) has been implemented.

scholarly journals The use of a particle method for the modelling of isotropic membrane stress for the form finding of shell structures

2015 ◽  
Vol 61 ◽  
pp. 24-31 ◽  
Author(s):  
Francis Aish ◽  
Sam Joyce ◽  
Samar Malek ◽  
Chris J.K. Williams
Keyword(s):  
Particle Method ◽  
Shell Structures ◽  
Membrane Stress ◽  
Form Finding

PUSHOVER ANALYSIS BY ONE ELEMENT PER MEMBER FOR PERFORMANCE-BASED SEISMIC DESIGN

2010 ◽  
Vol 10 (01) ◽  
pp. 111-126 ◽  
Author(s):  
S. W. LIU ◽  
Y. P. LIU ◽  
S. L. CHAN
Keyword(s):  
Seismic Design ◽  
Design Method ◽  
Pushover Analysis ◽  
Nonlinear Behavior ◽  
Computational Effort ◽  
Effective Length ◽  
Single Element ◽  
Individual Element ◽  
Economical Design ◽  
Performance Based Seismic Design

Nonlinear static (pushover) analysis is an effective and simple tool for evaluating the seismic response of structures and offers an attractive choice for the performance-based design. As such, it has generally been used in modern design due to its practicality. However, the nonlinear plastic design method consumes extensive computational effort for practical structures under numerous load cases. Thus, an efficient element capturing the nonlinear behavior of a beam-column will be useful. In this paper, the authors propose a practical pushover analysis procedure using a single element per member for seismic design. As an improvement to previous research works, both P – Δ and P – δ effects as well as initial imperfections in global and member levels are considered. Therefore, the section capacity check without the assumption of effective length is adequate for present design and the conventional individual element design is avoided. The uncertainty of the buckling effects and effective length method can be eliminated and so a more economical design can be achieved. Two benchmark steel frames of three-storey and nine-storey in FEMA 440 were analyzed to illustrate the validity of the proposed method.

scholarly journals Studi Perbandingan Analisis Struktur Rumah 2 Lantai Menggunakan Kayu Glulam dan Kayu Solid Terhadap Beban Gempa. (Hal. 85-94)

2019 ◽  
Vol 5 (1) ◽  
pp. 85
Author(s):  
Ramdhan Taufik ◽  
Erma Desmaliana ◽  
Amatulhay Pribadi
Keyword(s):  
Construction Material ◽  
Pushover Analysis ◽  
Solid Wood ◽  
Wood Products ◽  
Basic Material ◽  
Class Iii ◽  
Base Shear ◽  
Non Linear ◽  
The Difference ◽  
Immediate Occupancy

ABSTRAKKondisi geografis Indonesia memiliki struktur tektonik kompleks. Kondisi ini membuat perencanaan rumah tinggal 2 (dua) lantai membutuhkan pertimbangan khusus dari segi kekuatan dan kekakuan. Penggunaan material kayu sebagai bahan konstruksi di Indonesia masih jarang digunakan. Kayu glulam adalah suatu produk kayu rekayasa yang dibuat dari beberapa bilah kayu yang direkatkan dengan arah sejajar serat menggunakan perekat berupa lem. Penelitian ini bertujuan untuk mengidentifikasi respon struktur pada rumah tinggal menggunakan material kayu glulam dan solid dengan bantuan program ETABS 2016. Berdasarkan analisis yang telah dilakukan, diperoleh nilai periode struktur, gaya geser dasar, dan simpangan antar lantai antara seluruh model menunjukan hasil yang berbeda, perbedaan diakibatkan dari hasil konversi berat jenis dan modulus of elastisity berdasarkan BS EN 1194:1999. Berdasarkan analisis non-linier pushover didapatkan bahwa kayu glulam Nyatoh (kayu kelas III) berada pada level pada kinerja B to IO (Immediate Occupancy), dimana hasil tersebut tidak berbeda jauh dengan kayu solid Bangkirai (kayu kelas I).Kata Kunci: rumah tinggal, kayu glulam, non-linier pushover ABSTRACTGeographical condition of Indonesia has a complex tectonic structure. These conditions create  2-storyhome-planning that require special consideration in terms of strength and rigidity. The use of wood as a construction material in Indonesia is still rarely used. Glulam wood is a wood products engineering made from wooden slats several glued with the direction of the parallel fibers using adhesives. This research aims to identify the structure of the response at home using basic material glulam and solid wood with the help of ETABS 2016 programs. Based on the analysis that has been done, obtained the value of the structure periode, base shear force, and interstory drift between all models show different results, the difference is due to the results of specific gravity conversion and modulus of elasticity base on BS EN 1194:1999. Based on non-linear pushover analysis, it shows that Nyatoh glulam wood (class III wood) was at the level of the B to IO (Immediate Occupancy) performance, where the results were not much different from Bangkirai solid wood (class I wood).Keywords: home livingstructure, glulam wood, non-linear pushover

Form Finding of Shell Structures by Using Membrane Theory

2021 ◽  
pp. 213-237
Author(s):  
Francesco Marmo ◽  
Nicoló Vaiana
Keyword(s):  
Shell Structures ◽  
Membrane Theory ◽  
Form Finding

scholarly journals Predicting Maximum and Cumulative Response of A Base-isolated Building Using Pushover Analysis

Buildings ◽  
2020 ◽  
Vol 10 (5) ◽  
pp. 91
Author(s):  
Kenji Fujii ◽  
Yoshiyuki Mogi ◽  
Takumi Noguchi
Keyword(s):  
Seismic Design ◽  
Pushover Analysis ◽  
Analysis Method ◽  
Single Degree Of Freedom ◽  
Local Responses ◽  
Single Degree ◽  
Cumulative Response ◽  
Cumulative Strain ◽  
Lead Rubber Bearings ◽  
Rubber Bearings

The evaluation of the maximum and cumulative response is an important issue for the seismic design of new base-isolated buildings. This study predicts the maximum and cumulative response of a 14-story reinforced concrete base-isolated building using a set of pushover analyses. In the proposed pushover analysis method, the maximum and cumulative responses of the first and higher modes are evaluated from the nonlinear analysis of equivalent single-degree-of-freedom (SDOF) models. Then, the maximum local responses are predicted by enveloping the two pushover analysis results by referring to the contribution of the first and higher modal responses, while the cumulative strain energies of the lead-rubber bearings and steel dampers are predicted from the cumulative response of the first mode. The results reveal that the responses predicted by the proposed set of pushover analyses have satisfactory accuracy.

Sign in / Sign up

Export Citation Format

Share Document