The AgriQ: A low-cost unmanned aerial system for precision agriculture

2021 ◽  
pp. 115163
Author(s):  
Andres Montes de Oca ◽  
Gerardo Flores
Author(s):  
M. Possoch ◽  
S. Bieker ◽  
D. Hoffmeister ◽  
A. Bolten ◽  
J. Schellberg ◽  
...  

Remote sensing of crop biomass is important in regard to precision agriculture, which aims to improve nutrient use efficiency and to develop better stress and disease management. In this study, multi-temporal crop surface models (CSMs) were generated from UAV-based dense imaging in order to derive plant height distribution and to determine forage mass. The low-cost UAV-based RGB imaging was carried out in a grassland experiment at the University of Bonn, Germany, in summer 2015. The test site comprised three consecutive growths including six different nitrogen fertilizer levels and three replicates, in sum 324 plots with a size of 1.5×1.5 m. Each growth consisted of six harvesting dates. RGB-images and biomass samples were taken at twelve dates nearly biweekly within two growths between June and September 2015. Images were taken with a DJI Phantom 2 in combination of a 2D Zenmuse gimbal and a GoPro Hero 3 (black edition). Overlapping images were captured in 13 to 16 m and overview images in approximately 60 m height at 2 frames per second. The RGB vegetation index (RGBVI) was calculated as the normalized difference of the squared green reflectance and the product of blue and red reflectance from the non-calibrated images. The post processing was done with Agisoft PhotoScan Professional (SfM-based) and Esri ArcGIS. 14 ground control points (GCPs) were located in the field, distinguished by 30 cm × 30 cm markers and measured with a RTK-GPS (HiPer Pro Topcon) with 0.01 m horizontal and vertical precision. The errors of the spatial resolution in x-, y-, z-direction were in a scale of 3-4 cm. From each survey, also one distortion corrected image was georeferenced by the same GCPs and used for the RGBVI calculation. The results have been used to analyse and evaluate the relationship between estimated plant height derived with this low-cost UAV-system and forage mass. Results indicate that the plant height seems to be a suitable indicator for forage mass. There is a robust correlation of crop height related with dry matter (R² = 0.6). The RGBVI seems not to be a suitable indicator for forage mass in grassland, although the results provided a medium correlation by combining plant height and RGBVI to dry matter (R² = 0.5).


Author(s):  
James M. McKinion

Precision agriculture has been made possible by the confluence of several technologies: geographic positioning systems, geographic information systems, image analysis software, low-cost microcomputerbased variable rate controller/recorders, and precision tractor guidance systems. While these technologies have made precision agriculture possible, there are still major obstacles which must be overcome to make this new technology accepted and usable. Most growers will not do image processing and development of prescription maps themselves but will rely upon commercial sources. There still remains the challenge of storage and retrieval of multi-megabytes of data files for each field, and this problem will only continue to grow year by year. This chapter will discuss the various wireless technologies which are currently being used on three proof-of-concept farms or areas in Mississippi, the various data/ information intensive precision agriculture applications which use wireless local area networking and Internet access, and the next generation technologies which can immensely propel precision agriculture to widespread use in all of agriculture.


Agriculture ◽  
2020 ◽  
Vol 10 (3) ◽  
pp. 89 ◽  
Author(s):  
Alexandros Zervopoulos ◽  
Athanasios Tsipis ◽  
Aikaterini Georgia Alvanou ◽  
Konstantinos Bezas ◽  
Asterios Papamichail ◽  
...  

The advent of Internet of Things has propelled the agricultural domain through the integration of sensory devices, capable of monitoring and wirelessly propagating information to producers; thus, they employ Wireless Sensor Networks (WSNs). These WSNs allow real time monitoring, enabling intelligent decision-making to maximize yields and minimize cost. Designing and deploying a WSN is a challenging and multivariate task, dependent on the considered environment. For example, a need for network synchronization arises in such networks to correlate acquired measurements. This work focuses on the design and installation of a WSN that is capable of facilitating the sensing aspects of smart and precision agriculture applications. A system is designed and implemented to address specific design requirements that are brought about by the considered environment. A simple synchronization scheme is described to provide time-correlated measurements using the sink node’s clock as reference. The proposed system was installed on an olive grove to assess its effectiveness in providing a low-cost system, capable of acquiring synchronized measurements. The obtained results indicate the system’s overall effectiveness, revealing a small but expected difference in the acquired measurements’ time correlation, caused mostly by serial transmission delays, while yielding a plethora of relevant environmental conditions.


2017 ◽  
Vol 52 (2) ◽  
pp. 19-26 ◽  
Author(s):  
Ashraf Farah

Abstract Precise Point Positioning (PPP) is a technique used for position computation with a high accuracy using only one GNSS receiver. It depends on highly accurate satellite position and clock data rather than broadcast ephemeries. PPP precision varies based on positioning technique (static or kinematic), observations type (single or dual frequency) and the duration of collected observations. PPP-(dual frequency receivers) offers comparable accuracy to differential GPS. PPP-single frequency receivers has many applications such as infrastructure, hydrography and precision agriculture. PPP using low cost GPS single-frequency receivers is an area of great interest for millions of users in developing countries such as Egypt. This research presents a study for the variability of single frequency static GPS-PPP precision based on different observation durations.


2014 ◽  
Vol 4 (3) ◽  
pp. 113 ◽  
Author(s):  
M.G. Wing ◽  
J. Burnett ◽  
S. Johnson ◽  
A.E. Akay ◽  
J. Sessions

2012 ◽  
Vol 2012 ◽  
pp. 1-13 ◽  
Author(s):  
D. Sudharsan ◽  
J. Adinarayana ◽  
A. K. Tripathy ◽  
S. Ninomiya ◽  
M. Hirafuji ◽  
...  

Recent technological developments allowed to envision the low-power (solar power) and low-cost (open hardware) sensor devices (Agrisens/FieldServer/Flux Tower/FieldTwitter) with multimode (ZigBee/WiFi/3G/WebGIS) information and communication technologies (ICTs), a model in which is christened as GeoSense. Integrating these multimode and multi-level communication systems with distributed ambient sensory network location-based service (LBS) is a challenging task, which could be a potential technology for monitoring various natural phenomena. This integrated model is introduced to provide and assist the rural stakeholders with real-time decision support system (DSS) with dynamic information and modeling services for precision agriculture through GeoSense cloud service. This GeoSense research has been experimented in semiarid tropics in India under Indo-Japan initiative on multi-disciplinary ICT program.


2020 ◽  
Vol 26 (4) ◽  
pp. 1433-1442
Author(s):  
Qi Wang ◽  
Changsong Yang ◽  
Yuxiang Wang ◽  
Shao-en Wu

Sign in / Sign up

Export Citation Format

Share Document