Low temperature exhaust gas fuel reforming of diesel fuel

Fuel ◽  
2004 ◽  
Vol 83 (13) ◽  
pp. 1837-1845 ◽  
Author(s):  
A Tsolakis ◽  
A Megaritis ◽  
M.L Wyszynski
2011 ◽  
Vol 25 (3) ◽  
pp. 1034-1044 ◽  
Author(s):  
Alexandre Lebouvier ◽  
François Fresnet ◽  
Frédéric Fabry ◽  
Valérie Boch ◽  
Vandad Rohani ◽  
...  

2018 ◽  
Vol 22 (5) ◽  
pp. 2039-2052 ◽  
Author(s):  
Urban Zvar-Baskovic ◽  
Rok Vihar ◽  
Samuel Rodman-Opresnik ◽  
Tomaz Katrasnik

In the presented study, low temperature combustion was established with a direct injection of diesel fuel being a representative of high reactivity fuels and tire pyrolysis oil being a representative of low reactivity fuels. Tire pyrolysis oil was tested as a potential waste derived fuel for low temperature combustion, as it features diesel-like physical properties and lower cetane number compared to diesel fuel. The goal of this study was determination of suitable injection strategies and exhaust gas re-circulation rates to explore potentials of both fuels in reducing emissions in low temperature combustion modes. It was demonstrated that relatively small changes in the engine control strategy possess the potential to significantly improve NOx/particulate matter trade-off with minor effect on engine efficiency. In addition, low temperature combustion was for the first time successfully demonstrated with tire pyrolysis oil fuel, however, it was shown that lower re-activity of the fuel is by itself not sufficient to improve NOx /soot trade-off compared to the diesel fuel as entire spectra of fuel properties play an important role in improving NOx /soot trade-off. This study thus establishes relations between different engine control strategies, intake manifold pressure and exhaust gas recirculation rate on engine thermodynamic parameters and engine-out emissions while utilizing innovative waste derived fuel that have not yet been analysed in similar combustion concepts.


Author(s):  
Alireza Rahbari ◽  
Bamdad Barari ◽  
Ashkan Abbasian Shirazi

In this study, a mechanism containing ethanol reactions is employed and the effects of exhaust gas fuel reforming on operation parameters such as ignition timing, burn duration, temperature, pressure and NOx emission are studied in which a homogeneous mixture is assumed. The results show that hydrogen in the form of reformed gas helps in lowering the intake temperature required for stable HCCI operation. It is concluded that the addition of hydrogen advances the start of combustion in the cylinder. This is a result of the lowering of the minimum intake temperature required for auto-ignition to occur during the compression stroke, resulting in advanced combustion for the same intake temperatures. The obtained results from the model are compared with the experimental data published in the literature and the comparison showed a reasonable compatibility.


2006 ◽  
Vol 20 (6) ◽  
pp. 2377-2384 ◽  
Author(s):  
A. Abu-Jrai ◽  
A. Tsolakis ◽  
K. Theinnoi ◽  
R. Cracknell ◽  
A. Megaritis ◽  
...  

2018 ◽  
Vol 2018.26 (0) ◽  
pp. 303
Author(s):  
Shuhei SATO ◽  
Shintaro FUNAMI ◽  
Satoshi SAKAIDA ◽  
Kotaro TANAKA ◽  
Mitsuru KONNO

Sign in / Sign up

Export Citation Format

Share Document