A Comprehensive Review on Low-Temperature Combustion Technologies for Emission Reduction in Diesel Engines

Diesel engines are lean burn engines; hence CO and HC emissions in the exhaust are less likely to occur in substantial amounts. The emissions of serious concern in compression ignition engines are particulate matter and nitrogen oxides because of elevated temperature conditions of combustion. Hence the researchers have strived continuously to lower down the temperature of combustion in order to bring down the emissions from CI engines. This has been tried through premixed charge compression ignition, homogeneous charge compression ignition (HCCI), gasoline compression ignition and reactivity controlled compression ignition (RCCI). In this study, an attempt has been made to critically review the literature on low-temperature combustion conditions using various conventional and alternative fuels. The problems and challenges augmented with the strategies have also been described. Water-in-diesel emulsion technology has been discussed in detail. Most of the authors agree over the positive outcomes of water-diesel emulsion for both performance and emissions simultaneously.

Analysis The Effect of Coconut Shell Charcoal Mixed Doses and Adhesive In Characteristics Jamu Dregs Briquettes

Briquette is an alternative simple fuel that has a relatively high calorific value, so it has the potential to reduce the use of firewood and fuel oil (BBM). Herbal waste is one of the biomass materials that came from the rest of the material in the production of herbal medicine made from medicinal plants. Utilization of herbal dregs as briquettes has been implemented by PT. Industri Jamu dan Farmasi Sido Muncul. Tbk, as fuel for boiler engines. Making briquettes from biomass requires the addition of materials, one of which is coconut shell charcoal and adhesives such as molasses and tapioca flour to improve the physical properties of the briquettes. Briquettes with good quality have a maximum moisture content and ash content of 8%, a heating value of more than 5000 cal/gram, a constant combustion temperature of 350℃ for a long period of time and is easily flammable. The purpose of this study was to determine the characteristics of briquettes based on the value of water content, ash content, combustion temperature, combustion rate, and calorific value. Variable treatment with the addition of coconut shell charcoal with several doses of 10%, 20%, and 30% and variations of adhesive materials. Data analysis was performed by using two-factor ANOVA statistical test. The results showed that briquettes with tapioca flour adhesive and 30% coconut shell charcoal composition had the best characteristics of briquettes compared to other variations.