Prediction of solidification behavior of biodiesel containing monoacylglycerols above the solubility limit

Fuel ◽  
2022 ◽  
Vol 315 ◽  
pp. 123204
Author(s):  
Latifa Seniorita ◽  
Eiji Minami ◽  
Haruo Kawamoto
Keyword(s):  
Solubility Limit ◽  
Solidification Behavior

Evaporation of lignin-lean black liquor

TAPPI Journal ◽  
2015 ◽  
Vol 14 (7) ◽  
pp. 441-450
Author(s):  
HENRIK WALLMO, ◽  
ULF ANDERSSON ◽  
MATHIAS GOURDON ◽  
MARTIN WIMBY
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Black Liquor ◽  
Salt Content ◽  
Solubility Limit ◽  
Lignin Removal ◽  
Kraft Black Liquor ◽  
Black Liquors ◽  
The Heat Transfer Coefficient

Many of the pulp mill biorefinery concepts recently presented include removal of lignin from black liquor. In this work, the aim was to study how the change in liquor chemistry affected the evaporation of kraft black liquor when lignin was removed using the LignoBoost process. Lignin was removed from a softwood kraft black liquor and four different black liquors were studied: one reference black liquor (with no lignin extracted); two ligninlean black liquors with a lignin removal rate of 5.5% and 21%, respectively; and one liquor with maximum lignin removal of 60%. Evaporation tests were carried out at the research evaporator in Chalmers University of Technology. Studied parameters were liquor viscosity, boiling point rise, heat transfer coefficient, scaling propensity, changes in liquor chemical composition, and tube incrustation. It was found that the solubility limit for incrustation changed towards lower dry solids for the lignin-lean black liquors due to an increased salt content. The scaling obtained on the tubes was easily cleaned with thin liquor at 105°C. It was also shown that the liquor viscosity decreased exponentially with increased lignin outtake and hence, the heat transfer coefficient increased with increased lignin outtake. Long term tests, operated about 6 percentage dry solids units above the solubility limit for incrustation for all liquors, showed that the heat transfer coefficient increased from 650 W/m2K for the reference liquor to 1500 W/m2K for the liquor with highest lignin separation degree, 60%.

Solubility Limit and Annealing Effects on the Microstructure & Thermoelectricproperties of Fe 2V 1-XTa xAl 1-YSi y Heusler Compounds

2021 ◽  
Author(s):  
Fabian Garmroudi ◽  
Michael Parzer ◽  
Alexander Riss ◽  
Nikolas Reumann ◽  
Bernhard Hinterleitner ◽  
...  
Keyword(s):  
Solubility Limit ◽  
Heusler Compounds ◽  
Annealing Effects

scholarly journals Nucleation Behavior of a Single Al-20Si Particle Rapidly Solidified in a Fast Scanning Calorimeter

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2920
Author(s):  
Qin Peng ◽  
Bin Yang ◽  
Benjamin Milkereit ◽  
Dongmei Liu ◽  
Armin Springer ◽  
...  
Keyword(s):  
Cooling Rate ◽  
Rapid Solidification ◽  
Heterogeneous Nucleation ◽  
Nucleation Theory ◽  
Classical Nucleation Theory ◽  
Solidification Behavior ◽  
Nucleation Kinetics ◽  
Nucleation Behavior ◽  
Nucleation Undercooling ◽  
Primary Si

Understanding the rapid solidification behavior characteristics, nucleation undercooling, and nucleation mechanism is important for modifying the microstructures and properties of metal alloys. In order to investigate the rapid solidification behavior in-situ, accurate measurements of nucleation undercooling and cooling rate are required in most rapid solidification processes, e.g., in additive manufacturing (AM). In this study, differential fast scanning calorimetry (DFSC) was applied to investigate the nucleation kinetics in a single micro-sized Al-20Si (mass%) particle under a controlled cooling rate of 5000 K/s. The nucleation rates of primary Si and secondary α-Al phases were calculated by a statistical analysis of 300 identical melting/solidification experiments. Applying a model based on the classical nucleation theory (CNT) together with available thermodynamic data, two different heterogeneous nucleation mechanisms of primary Si and secondary α-Al were proposed, i.e., surface heterogeneous nucleation for primary Si and interface heterogenous nucleation for secondary α-Al. The present study introduces a practical method for a detailed investigation of rapid solidification behavior of metal particles to distinguish surface and interface nucleation.

Solidification behavior of an ice slurry flowing in a rectangular channel

2021 ◽  
Author(s):  
Takashi Morimoto ◽  
Wataru Komatsu ◽  
Hayato Kimata ◽  
Makoto Kato ◽  
Hiroyuki Kumano
Keyword(s):  
Rectangular Channel ◽  
Solidification Behavior ◽  
Ice Slurry

scholarly journals Paclitaxel loading in cationic liposome vectors is enhanced by replacement of oleoyl with linoleoyl tails with distinct lipid shapes

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Yuhong Zhen ◽  
Kai K. Ewert ◽  
William S. Fisher ◽  
Victoria M. Steffes ◽  
Youli Li ◽  
...  
Keyword(s):  
Clinical Trials ◽  
Membrane Structure ◽  
Cationic Liposome ◽  
Solubility Limit ◽  
Loading Capacity ◽  
Prostate Cancer Cells ◽  
X Ray ◽  
X Ray Scattering ◽  
Cylindrical Micelles ◽  
Molecular Affinity

AbstractLipid carriers of hydrophobic paclitaxel (PTX) are used in clinical trials for cancer chemotherapy. Improving their loading capacity requires enhanced PTX solubilization. We compared the time-dependence of PTX membrane solubility as a function of PTX content in cationic liposomes (CLs) with lipid tails containing one (oleoyl; DOPC/DOTAP) or two (linoleoyl; DLinPC/newly synthesized DLinTAP) cis double bonds by using microscopy to generate kinetic phase diagrams. The DLin lipids displayed significantly increased PTX membrane solubility over DO lipids. Remarkably, 8 mol% PTX in DLinTAP/DLinPC CLs remained soluble for approximately as long as 3 mol% PTX (the solubility limit, which has been the focus of most previous studies and clinical trials) in DOTAP/DOPC CLs. The increase in solubility is likely caused by enhanced molecular affinity between lipid tails and PTX, rather than by the transition in membrane structure from bilayers to inverse cylindrical micelles observed with small-angle X-ray scattering. Importantly, the efficacy of PTX-loaded CLs against prostate cancer cells (their IC50 of PTX cytotoxicity) was unaffected by changing the lipid tails, and toxicity of the CL carrier was negligible. Moreover, efficacy was approximately doubled against melanoma cells for PTX-loaded DLinTAP/DLinPC over DOTAP/DOPC CLs. Our findings demonstrate the potential of chemical modifications of the lipid tails to increase the PTX membrane loading while maintaining (and in some cases even increasing) the efficacy of CLs. The increased PTX solubility will aid the development of liposomal PTX carriers that require significantly less lipid to deliver a given amount of PTX, reducing side effects and costs.

Sign in / Sign up

Export Citation Format

Share Document