Interphase effect on the effective magneto-electro-elastic properties for three-phase fiber-reinforced composites by a semi-analytical approach

2020 ◽  
Vol 154 ◽  
pp. 103310 ◽  
Author(s):  
Y. Espinosa-Almeyda ◽  
H. Camacho-Montes ◽  
J.A. Otero ◽  
R. Rodríguez-Ramos ◽  
J.C. López-Realpozo ◽  
...  
Keyword(s):  
Elastic Properties ◽  
Analytical Approach ◽  
Fiber Reinforced Composites ◽  
Reinforced Composites ◽  
Fiber Reinforced ◽  
Three Phase

scholarly journals Effective Complex Properties for Three-Phase Elastic Fiber-Reinforced Composites with Different Unit Cells

Technologies ◽  
2021 ◽  
Vol 9 (1) ◽  
pp. 12
Author(s):  
Federico J. Sabina ◽  
Yoanh Espinosa-Almeyda ◽  
Raúl Guinovart-Díaz ◽  
Reinaldo Rodríguez-Ramos ◽  
Héctor Camacho-Montes
Keyword(s):  
Effective Properties ◽  
Elastic Fiber ◽  
Fiber Reinforced Composites ◽  
Reinforced Composites ◽  
Fiber Reinforced ◽  
Effective Coefficients ◽  
Three Phase ◽  
Out Of Plane ◽  
Local Problems ◽  
Unit Cells

The development of micromechanical models to predict the effective properties of multiphase composites is important for the design and optimization of new materials, as well as to improve our understanding about the structure–properties relationship. In this work, the two-scale asymptotic homogenization method (AHM) is implemented to calculate the out-of-plane effective complex-value properties of periodic three-phase elastic fiber-reinforced composites (FRCs) with parallelogram unit cells. Matrix and inclusions materials have complex-valued properties. Closed analytical expressions for the local problems and the out-of-plane shear effective coefficients are given. The solution of the homogenized local problems is found using potential theory. Numerical results are reported and comparisons with data reported in the literature are shown. Good agreements are obtained. In addition, the effects of fiber volume fractions and spatial fiber distribution on the complex effective elastic properties are analyzed. An analysis of the shear effective properties enhancement is also studied for three-phase FRCs.

Coefficients of thermal expansion of unidirectional fiber-reinforced composites using unit-cell model

2018 ◽  
Vol 53 (11) ◽  
pp. 1425-1436
Author(s):  
PC Upadhyay ◽  
JP Dwivedi ◽  
VP Singh
Keyword(s):  
Thermal Expansion ◽  
Cell Model ◽  
Unit Cell ◽  
Fiber Reinforced Composites ◽  
Reinforced Composites ◽  
Unit Cell Model ◽  
Fiber Reinforced ◽  
Two Phase ◽  
Thermal Expansion Coefficients ◽  
Three Phase

Coefficients of thermal expansion of some uniaxially fiber-reinforced composites have been evaluated using three-phase unit-cell model. Results have been compared with the values predicted by two other models based on composite cylinders assembly (CCA), and also with some earlier reported experimental values. An extension of the two-phase unit-cell model has also been presented for the evaluation of thermal expansion coefficients of three-phase composites. The formulation has been used to evaluate the overall coefficients of thermal expansion of AS-graphite/epoxy system with a low modulus coating on the fibers. The results have been compared with the results obtained from the Sutcu's recursive concentric cylinders model for composites containing coated fibers. From the comparison of results of the unit-cell models (both, two-phase and three-phase) with the results obtained from some other models available in the literature, it is concluded that the overall thermal properties of fiber-reinforced composites evaluated by the unit-cell model can be used as effectively as by any other model.

Micromechanics-based analyses of short fiber-reinforced composites with functionally graded interphases

2019 ◽  
Vol 54 (8) ◽  
pp. 1031-1048 ◽  
Author(s):  
Yang Yang ◽  
Qi He ◽  
Hong-Liang Dai ◽  
Jian Pang ◽  
Liang Yang ◽  
...  
Keyword(s):  
Aspect Ratio ◽  
Elastic Properties ◽  
Effective Properties ◽  
Micromechanical Model ◽  
Short Fiber ◽  
Functionally Graded ◽  
Fiber Reinforced Composites ◽  
Reinforced Composites ◽  
Fiber Reinforced ◽  
The Matrix

A micromechanical model for short fiber-reinforced composites (SFRCs) with functionally graded interphases and a systematic prediction scheme to determine the effective properties are presented. The matrix and the fibers are regarded to be linear elastic, isotropic, and homogeneous. Fibers are assumed to be ellipsoids coated perfectly by functionally graded interphases, which is supposed to be formed chemically or physically by the constituents near the interface. First, to analyze the grading interphase effect, layer-wise concept is followed to divide the functionally graded interphases into multi-homogeneous sub-layers. Next, to take the effect of functionally graded interphases into account, a combination of multi-inclusion method and Mori–Tanaka method is applied to predict effective elastic properties of this unidirectional SFRCs with respect to the content and aspect ratio of the inclusions. By employing coordinate transformation, spatially elastic moduli are obtained. Finally, Voigt homogenization scheme is used to obtain the overall, averaged, symmetrical elastic properties of the SFRCs. Numerical examples and analyses demonstrate the applicability of the proposed method and indicate the influences of graded interphase, orientation, and aspect ratio of inclusions as well as properties and contents of the constituents on the overall properties of SFRCs.

A New Embedded-Zone Method on Computation of the Transverse Elastic Properties of Fiber-Reinforced Composites

2005 ◽  
Author(s):  
Xiaochun Wang
Keyword(s):  
Plane Strain ◽  
Elastic Properties ◽  
Fiber Reinforced Composites ◽  
Reinforced Composites ◽  
Fiber Reinforced ◽  
Zone Method ◽  
Two Dimension ◽  
The Matrix ◽  
Strain Model ◽  
Plane Strain Model

There are many methods on computation of transverse elastic properties of unidirectional fiber-reinforced composites when using the finite element method, such as three-dimension model, two-dimension plane strain model, unit cell model, etc[1]. But unit cell models could be used only when the fibers are arrayed regularly. The computations of three- and two-dimension plane strain models are tremendous when many fine fibers are spread randomly in the matrix so that the properties of block of composite must be computed. The paper proposes a new embedded-zone method to compute the transverse elastic properties for a block of fiber-reinforced composites containing a great amount of fibers embedded in the matrix stochastically while using very little computational work compared with three- and two-dimension plane strain model. The transverse elastic modulus and shear modulus of unidirectional fiber-reinforced composites are computed.

On the Overall Properties of Composites Reinforced by Fibers With Prescribed Orientations

2015 ◽  
Author(s):  
Yana Morenko ◽  
Pavlo Krokhmal ◽  
Olesya I. Zhupanska
Keyword(s):  
Uniform Distribution ◽  
Elastic Properties ◽  
Optimization Problem ◽  
Distribution Functions ◽  
Fiber Reinforced Composites ◽  
Semidefinite Optimization ◽  
Reinforced Composites ◽  
Fiber Reinforced ◽  
Positive Semidefinite Matrices ◽  
Orientational Distribution

This study is concerned with development of bounds on the elastic properties of fiber reinforced composites with arbitrary orientational distribution of fibers. Generalization of the Mori-Tanaka model [1] and Hashin-Schtrikman variational bounds [2] to the cases of non-aligned composite phases are examined. Orientation distribution functions (ODF) are used to describe orientation probability density. It is shown that the Mori-Tanaka scheme applied to the non-aligned fiber reinforced composites violates symmetry of the effective elastic moduli tensor. The study of the literature also reveals that there are no known bounds derived for the composites with orientational distribution (except for the random uniform distribution) of phases. To overcome this issue we propose to formulate a problem of finding tightest bounds for the composites with non-aligned phases as a nonlinear semidefinite optimization problem, i.e., an optimization problem where the optimization variables are represented by symmetric positive semidefinite matrices. Such a formulation guarantees that any solution of the optimization problem represents a valid tensor of elastic material properties. The optimization problem then is solved by an interior point method to produce optimal bounds for the overall elastic properties of two-phase composite with uniform distribution of carbon nanotubes in a polymer matrix.

Sign in / Sign up

Export Citation Format

Share Document