Strain-energy function and three-dimensional stress distribution in esophageal biomechanics

2010 ◽  
Vol 43 (14) ◽  
pp. 2753-2764 ◽  
Author(s):  
Dimitrios P. Sokolis
Keyword(s):  
Stress Distribution ◽  
Energy Function ◽  
Strain Energy ◽  
Three Dimensional ◽  
Strain Energy Function

Three-Dimensional Stress Distribution in Arteries

1983 ◽  
Vol 105 (3) ◽  
pp. 268-274 ◽  
Author(s):  
C. J. Chuong ◽  
Y. C. Fung
Keyword(s):  
Experimental Data ◽  
Stress Distribution ◽  
Vessel Wall ◽  
Strain Energy ◽  
Arterial Wall ◽  
Three Dimensional ◽  
Strain Energy Function ◽  
Exponential Form ◽  
Strain Relationship ◽  
Longitudinal Stretch

A three-dimensional stress-strain relationship derived from a strain energy function of the exponential form is proposed for the arterial wall. The material constants are identified from experimental data on rabbit arteries subjected to inflation and longitudinal stretch in the physiological range. The objectives are: 1) to show that such a procedure is feasible and practical, and 2) to call attention to the very large variations in stresses and strains across the vessel wall under the assumptions that the tissue is incompressible and stress-free when all external load is removed.

ON THE DEVELOPMENT OF COMPRESSIBLE PSEUDO-STRAIN ENERGY DENSITY FUNCTION FOR HYPERELASTIC MATERIAL: EXPERIMENT, THEORY AND FEM

2005 ◽  
Vol 29 (3) ◽  
pp. 459-475
Author(s):  
Hamid Ghaemi ◽  
A. Spence ◽  
K. Behdinan
Keyword(s):  
Mechanical Behavior ◽  
Density Function ◽  
Energy Function ◽  
Strain Energy ◽  
Three Dimensional ◽  
Strain Energy Function ◽  
Material Parameter Identification ◽  
Constitutive Function ◽  
Strain Energy Density Function ◽  
Biaxial Tests

This study was carried out to develop a compressible pseudo-strain energy function that describes the mechanical behavior of rubber-like materials. The motivation for this work was two fold; first was to define a single-term strain energy function derived from constitutive equations that can describe the mechanical behavior of rubber-like materials and taking into account the coupling between principal stretches and the nearly incompressibility characteristic of elastomers. Second was to implement this strain energy function into the Finite Element Method (FEM) to study the suitability of the model in FEM. A one-term three-dimensional strain energy function based on the principal stretch ratios was proposed. The three dimensional constitutive function was then reduced to describe the behavior of rubber-like materials under biaxial and uniaxial loading condition based on the membrane theory. The work presented here was based on the decoupling of the strain density function into a deviatoric and a volumetric part. Using pure gum, GMS-SS-A40, uniaxial and equi-biaxial experiments were conducted employing different strain rate protocols. The material was assumed to be isotropic and homogenous. The experimental data from uniaxial and biaxial tests were used simultaneously to determine the material parameters of the proposed strain energy function. A GA curve fitting technique was utilized in the material parameter identification. The proposed strain energy function was compared to a few well-known strain energy functions as well as the experimental results. It was determined that the proposed strain energy function predicted the mechanical behavior of rubber-like material with greater accuracy as compared to other models both analytical and numerical results.

The Cosserat Point Element as an Accurate and Robust Finite Element Formulation for Implicit Dynamic Simulations

2019 ◽  
Vol 17 (01) ◽  
pp. 1844006
Author(s):  
Mahmood Jabareen ◽  
Yehonatan Pestes
Keyword(s):  
Finite Element ◽  
Energy Function ◽  
Strain Energy ◽  
Three Dimensional ◽  
Nonlinear Dynamic Analysis ◽  
Strain Energy Function ◽  
Finite Element Formulation ◽  
Element Formulation ◽  
Dynamic Simulations ◽  
Cosserat Point

The reliability of numerical simulations manifested the need for an accurate and robust finite element formulation. Therefore, in the present study, an eight node brick Cosserat point element ( CPE ) for the nonlinear dynamic analysis of three-dimensional (3D) solids including both thick and thin structures is developed. Within the present finite element formulation, a strain energy function is proposed and additively decoupled into two parts. One part is characterized by any 3D strain energy function, while the other part controls the response to inhomogeneous deformations. Several example problems are presented, which demonstrate the accuracy and the robustness of the developed CPE in modeling the dynamic response of elastic structures.

An integrated formulation of anisotropic force–calcium relations driving spatio-temporal contractions of cardiac myocytes

2009 ◽  
Vol 367 (1908) ◽  
pp. 4887-4905 ◽  
Author(s):  
Philippe Tracqui ◽  
Jacques Ohayon
Keyword(s):  
Intracellular Calcium ◽  
Cardiac Myocytes ◽  
Energy Function ◽  
Strain Energy ◽  
Sarcomere Length ◽  
Cardiac Myocyte ◽  
Three Dimensional ◽  
Strain Energy Function ◽  
Calcium Dynamics ◽  
Spatio Temporal

Isolated cardiac myocytes exhibit spontaneous patterns of rhythmic contraction, driven by intracellular calcium waves. In order to study the coupling between spatio-temporal calcium dynamics and cell contraction in large deformation regimes, a new strain-energy function, describing the influence of sarcomere length on the calcium-dependent generation of active intracellular stresses, is proposed. This strain-energy function includes anisotropic passive and active contributions that were first validated separately from experimental stress–strain curves and stress–sarcomere length curves, respectively. An extended validation of this formulation was then conducted by considering this strain-energy function as the core of an integrated mechano-chemical three-dimensional model of cardiac myocyte contraction, where autocatalytic intracellular calcium dynamics were described by a representative two-variable model able to generate realistic intracellular calcium waves similar to those observed experimentally. Finite-element simulations of the three-dimensional cell model, conducted for different intracellular locations of triggering calcium sparks, explained very satisfactorily, both qualitatively and quantitatively, the contraction patterns of cardiac myocytes observed by time-lapse videomicroscopy. This integrative approach of the mechano-chemical couplings driving cardiac myocyte contraction provides a comprehensive framework for analysing active stress regulation and associated mechano-transduction processes that contribute to the efficiency of cardiac cell contractility in both physiological and pathological contexts.

MATHEMATICAL MODEL FOR THE RUPTURE OF CEREBRAL SACCULAR ANEURYSMS THROUGH THREE-DIMENSIONAL STRESS DISTRIBUTION IN THE ANEURYSM WALL

2006 ◽  
Vol 06 (03) ◽  
pp. 325-335 ◽  
Author(s):  
HANS R. CHAUDHRY ◽  
DAWN A. LOTT ◽  
CHARLES J. PRESTIGIACOMO ◽  
THOMAS W. FINDLEY
Keyword(s):  
Mathematical Model ◽  
Stress Distribution ◽  
Strain Energy ◽  
Finite Strain ◽  
Three Dimensional ◽  
Strain Energy Function ◽  
Unruptured Aneurysms ◽  
Aneurysm Wall ◽  
Thin Spherical Shell ◽  
Saccular Aneurysms

A mathematical model for the rupture of cerebral saccular aneurysms is developed through the analysis of three-dimensional stress distribution in the aneurysm wall. We assume in this paper that a saccular aneurysm resembles a thin spherical shell (a spherical membrane), and then develop a strain-energy function valid for finite strain to analyze three-dimensional stress distribution in the aneurysm wall. We find that rupture occurs when the ratio of the wall thickness to the radius of the aneurysm is 6.1 × 10-3. We also conclude from our analysis that rupture can occur when the ratio of thickness to radius of the parent aneurysm equals the ratio of thickness to radius of the daughter aneurysm. These findings may be helpful to the neurosurgeon for predicting the rupture potential in patients presenting with unruptured aneurysms.

Mechanical power and hyperelasticity

2017 ◽  
Author(s):  
David J. Steigmann
Keyword(s):  
Energy Function ◽  
Strain Energy ◽  
Strain Energy Function ◽  
Mechanical Power ◽  
Elastic Materials ◽  
Cyclic Motion

This chapter covers the notion of hyperelasticity—the concept that stress is derived from a strain—energy function–by invoking an analogy between elastic materials and springs. Alternatively, it can be derived by invoking a work inequality; the notion that work is required to effect a cyclic motion of the material.

scholarly journals Modelling the Inflation and Elastic Instabilities of Rubber-Like Spherical and Cylindrical Shells Using a New Generalised Neo-Hookean Strain Energy Function

2021 ◽  
Author(s):  
Afshin Anssari-Benam ◽  
Andrea Bucchi ◽  
Giuseppe Saccomandi
Keyword(s):  
Experimental Data ◽  
Energy Function ◽  
Limit Point ◽  
Strain Energy ◽  
Cylindrical Shells ◽  
Strain Energy Function ◽  
Model Parameters ◽  
Wide Range ◽  
Cylindrical Tubes ◽  
Gent Model

AbstractThe application of a newly proposed generalised neo-Hookean strain energy function to the inflation of incompressible rubber-like spherical and cylindrical shells is demonstrated in this paper. The pressure ($P$ P ) – inflation ($\lambda $ λ or $v$ v ) relationships are derived and presented for four shells: thin- and thick-walled spherical balloons, and thin- and thick-walled cylindrical tubes. Characteristics of the inflation curves predicted by the model for the four considered shells are analysed and the critical values of the model parameters for exhibiting the limit-point instability are established. The application of the model to extant experimental datasets procured from studies across 19th to 21st century will be demonstrated, showing favourable agreement between the model and the experimental data. The capability of the model to capture the two characteristic instability phenomena in the inflation of rubber-like materials, namely the limit-point and inflation-jump instabilities, will be made evident from both the theoretical analysis and curve-fitting approaches presented in this study. A comparison with the predictions of the Gent model for the considered data is also demonstrated and is shown that our presented model provides improved fits. Given the simplicity of the model, its ability to fit a wide range of experimental data and capture both limit-point and inflation-jump instabilities, we propose the application of our model to the inflation of rubber-like materials.

Mechanical characterization of a woven multi-layered hyperelastic composite laminate under uniaxial loading

2021 ◽  
pp. 002199832110115
Author(s):  
Shaikbepari Mohmmed Khajamoinuddin ◽  
Aritra Chatterjee ◽  
MR Bhat ◽  
Dineshkumar Harursampath ◽  
Namrata Gundiah
Keyword(s):  
Composite Materials ◽  
Energy Function ◽  
Strain Energy ◽  
Strain Energy Function ◽  
Mechanical Tests ◽  
Stress Strain ◽  
Aerospace Applications ◽  
Envelope Material ◽  
The Individual ◽  
High Dielectric

We characterize the material properties of a woven, multi-layered, hyperelastic composite that is useful as an envelope material for high-altitude stratospheric airships and in the design of other large structures. The composite was fabricated by sandwiching a polyaramid Nomex® core, with good tensile strength, between polyimide Kapton® films with high dielectric constant, and cured with epoxy using a vacuum bagging technique. Uniaxial mechanical tests were used to stretch the individual materials and the composite to failure in the longitudinal and transverse directions respectively. The experimental data for Kapton® were fit to a five-parameter Yeoh form of nonlinear, hyperelastic and isotropic constitutive model. Image analysis of the Nomex® sheets, obtained using scanning electron microscopy, demonstrate two families of symmetrically oriented fibers at 69.3°± 7.4° and 129°± 5.3°. Stress-strain results for Nomex® were fit to a nonlinear and orthotropic Holzapfel-Gasser-Ogden (HGO) hyperelastic model with two fiber families. We used a linear decomposition of the strain energy function for the composite, based on the individual strain energy functions for Kapton® and Nomex®, obtained using experimental results. A rule of mixtures approach, using volume fractions of individual constituents present in the composite during specimen fabrication, was used to formulate the strain energy function for the composite. Model results for the composite were in good agreement with experimental stress-strain data. Constitutive properties for woven composite materials, combining nonlinear elastic properties within a composite materials framework, are required in the design of laminated pretensioned structures for civil engineering and in aerospace applications.

Sign in / Sign up

Export Citation Format

Share Document