The aim of the work was to study the effect of bis-(triethoxysilylpropyl)-tetrasulfide (TESPT) mixed with carbon black N330 in a ratio of 1:1, as a technical product OFS 6945 on the structure and properties of rubber mixtures and rubbers based on ethylene propylene rubber of the brand Vistalon 2504N and silica filler (KKN) of the brand Rosil-175, taken at a dosage of 30 wt. h. per 100 wt.h. rubber. The content of TESPT was 0.035, 0.050 and 0.070 mmol / 100 g of rubber. A group of vulcanizing agents included sulphur, thiuram, captax, zinc oxide and technical stearin. Rubber mixtures were prepared on rollers Lb 320 160/160. Organosilane was injected into rubber at the same time as Rosil-175. The homogeneity of the filler distribution in the finished mixtures was evaluated based on the results of testing samples on the RPA-2000 vibrorheometer. Vulcanization characteristics were determined using an MDR-2000 device. The structure of mixtures and rubbers was studied by the method of equal swelling of samples in toluene. It is shown that with the increasing content of TESPT, the proportion of bound rubber in a three-component mixture of the rubber – filler – organosilane increases due to the formation of interfacial connections. The uniformity of distribution of silica fillers in rubber matrix also increases. Workability of the mixtures on roller equipment improves. The rate of cross-linking in the core period and the degree of cross-linking of macromolecules at the same time curing increase as well. As a result, the elastic-strength properties of rubbers determined in the static test mode are improved, the best complex of which is provided with an organosilane content of 0.050 mmol/100 g of rubber.
The Structure and Properties of the Nickel Oxide-Silica Catalyst Prepared by a Super-Homogeneous Co-Precipitation Method