Recovery and dormancy of nitrogen removal characteristics in the pilot-scale denitrification-partial nitrification-Anammox process for landfill leachate treatment

2021 ◽  
Vol 300 ◽  
pp. 113711
Author(s):  
Xiang Li ◽  
Ren-jie Tao ◽  
Meng-jia Tian ◽  
Yan Yuan ◽  
Yong Huang ◽  
...  
Keyword(s):  
Nitrogen Removal ◽  
Landfill Leachate ◽  
Pilot Scale ◽  
Partial Nitrification ◽  
Leachate Treatment ◽  
Anammox Process

The Nitrogen Removal on landfill leachate treatment In reeds Wetland

2010 ◽  
Vol 150 ◽  
pp. 39-39 ◽  
Author(s):  
Bing Xie ◽  
Qian Liu ◽  
Chong Hu
Keyword(s):  
Nitrogen Removal ◽  
Landfill Leachate ◽  
Leachate Treatment

Treatment of Landfill Leachate by Anammox Process

2020 ◽  
pp. 1169-1191
Author(s):  
Grzegorz Cema ◽  
Adam Sochacki
Keyword(s):  
Nitrogen Removal ◽  
Landfill Leachate ◽  
Inorganic Compounds ◽  
Complex Mixture ◽  
Short Review ◽  
Special Focus ◽  
Ammonia Content ◽  
Partial Nitritation ◽  
Reject Water ◽  
Anammox Process

In most cases, the anammox process is used for nitrogen removal from reject water coming from dewatering of digested sludge. However, there are more industrial streams suitable for treatment by partial nitritation/anammox process. The landfill leachate may be a good example of such wastewater. Generally, landfilling is the most used solution for treatment of urban solid wastes. The problem with landfill leachate production and management is one of the most important issues associated with the sanitary landfills. These streams are highly contaminated wastewater with a complex mixture of organic and inorganic compounds and characterized by a high ammonia content and low biodegradable organic fraction matter. The objective of this chapter is the short characteristic of landfill leachate and a short review of its treatment methods with special focus on nitrogen removal by partial nitritation/anammox process.

scholarly journals Performance of the anammox sequencing batch reactor treating synthetic and real landfill leachate

2018 ◽  
Vol 44 ◽  
pp. 00179 ◽  
Author(s):  
Mariusz Tomaszewski ◽  
Grzegorz Cema ◽  
Tomasz Twardowski ◽  
Aleksandra Ziembińska-Buczyńska
Keyword(s):  
Nitrogen Removal ◽  
Landfill Leachate ◽  
Sequencing Batch Reactor ◽  
Batch Reactor ◽  
Nitrogen Loading ◽  
Synthetic Wastewater ◽  
High Nitrogen ◽  
Removal Capacity ◽  
Anammox Activity ◽  
Anammox Process

The anaerobic ammonium oxidation (anammox) process is one of the most energy efficient and environmentally-friendly bioprocess for the treatment of the wastewater with high nitrogen concentration. The aim of this work was to study the influence of the high nitrogen loading rate (NLR) on the nitrogen removal in the laboratory-scale anammox sequencing batch reactor (SBR), during the shift from the synthetic wastewater to landfill leachate. In both cases with the increase of NLR from 0.5 to 1.1 – 1.2 kg N/m3d, the nitrogen removal rate (NRR) increases to about 1 kg N/m3d, but higher NLR caused substrates accumulation and affects anammox process efficiency. Maximum specific anammox activity was determined as 0.638 g N/g VSSd (NRR 1.023 kg N/m3d) and 0.594 g N/g VSSd (NRR 1.241 kg N/m3d) during synthetic and real wastewater treatment, respectively. Both values are similar and this is probably the nitrogen removal capacity of the used anammox biomass. This indicates, that landfill leachate did not influence the nitrogen removal capacity of the anammox process.

Sign in / Sign up

Export Citation Format

Share Document