Reduction of the environmental impacts of the hydropower plant by microalgae cultivation and biodiesel production

2022 ◽  
Vol 304 ◽  
pp. 114247
Author(s):  
Rahim Zahedi ◽  
Abolfazl Ahmadi ◽  
Siavash Gitifar
2016 ◽  
Vol 78 (7) ◽  
Author(s):  
Costantine Joannes ◽  
Rachel Fran Mansa ◽  
Suhaimi Md. Yasir ◽  
Jedol Dayou

Lately, research on biodiesel production as a renewable and sustainable energy has become increasingly apparent due to the fact that fossil fuel is decreasing and the concern of global warming issues. The third generation of biofuel, which is microalgae-based biodiesel had gained interest over the last decade. The ability of microalgae to grow in various conditions is one of its advantages as the potential and promising feedstock for biodiesel. Microalgae can be cultivated in three modes such as photoautotrophic, heterotrophic and mixotrophic culture mode. Unlike photoautotrophic mode where light is required, the heterotrophic mode mainly utilized carbon compounds to grow. On the other hand, the mixotrophic mode is the condition where light and carbon compounds are supplied for microalgae culturing. This paper investigates the cell growth of Chlorella sp. cultivated in photoautotrophic, heterotrophic and mixotrophic culture mode. It was found that Chlorella sp. was capable of producing the highest cell concentration of 6.67 ± 0.56 x 106 cell mL-1 in the photoautotrophic mode for 23 days of cultivation period. This was 1.3 times and 3.2 times greater than the cell concentration in mixotrophic (5.02 ± 0.49 x 106 cell mL-1) and heterotrophic (2.03 ± 0.29 x 106 cell mL-1) culture, respectively. On the contrary, the highest specific growth rate obtained in the study was from heterotrophic mode (0.32 ± 0.04 day-1) followed by photoautotrophic and mixotrophic mode with 0.26 ± 0.05 day-1 and 0.20 ± 0.04 day-1, respectively. Chlorella sp. cell grew well under the photoautotrophic and mixotrophic mode. However, the insufficient of glucose level had contributed to lower cells productivity in the heterotrophic culture. Therefore, the mixotrophic mode could also be an alternative pathway in microalgae cultivation for biodiesel production if the glucose supplied was adequate and at the suitable level.  


2020 ◽  
Vol 141 ◽  
pp. 03009
Author(s):  
Pichayatorn Bunkaew ◽  
Sasithorn Kongruang

The Plackett-Burman Design (PBD) was applied to study fresh water microalgae cultivation using Chlorella sp. TISTR 8411 to select the influential nutrient factors for biomass and lipid production. The PBD for 13 trials from 11 nutrient factors with 3 levels was studied in the mixotrophic cultivation at 28 0C under 16:8 light and dark photoperiods over 7 days of cultivation time. Two influential factors were chosen as glucose and cobalt chloride hexahydrate to further design via Box-Behnken Design (BBD) in order to optimize the cultivation of this microalgae for biodiesel production. The 17 trials of 3 factors and 3 levels of BBD experimental design technique were applied with varying factors of glucose (20-40 g/L), cobalt chloride hexahydrate (0.01-0.04 mg/L) and light intensity (4,500-7,500 Lux) under 16:8 light and dark photoperiods over 7 days of cultivation time at 28 0C. Result showed that Chlorella sp. TISTR 8411 cultivation yield 0.52 g/L biomass and 0.31 g/L lipid production resulting in approximately 60% of lipid production when cultivated in 20.05 g/L glucose, 0.04 mg/L CoCl26H2O under light intensity of 4,614 Lux with the supplementation of 4.38 g/L NaHCO3 coupled with 1 g/L of both NaNO3 and KH2PO4. Under statically mixotrophic cultivation, result indicated that Chlorella sp. TISTR 8411 had potential to produce high lipid content for biodiesel application and biomass production for nutraceutical application. Further experiment with the longer cultivation period up to 2 weeks would implement not only for monitoring the growth kinetics but also evaluating the suitable type of fatty acid production.


2020 ◽  
Vol 32 (5) ◽  
pp. 2977-2995 ◽  
Author(s):  
S. Schade ◽  
T. Meier

Abstract Specific microalgae species are an adequate source of EPA and DHA and are able to provide a complete protein, which makes them highly interesting for human nutrition. However, microalgae cultivation has also been described to be energy intensive and environmentally unfavorable in pilot-scale reactors. Moreover, production in cold temperature zones has not been sufficiently investigated. In particular, the effects of tube materials and cultivation season length have rarely been previously investigated in the context of a comparative LCA of microalgae cultivation. A computational “top-down” model was conducted to calculate input flows for Nannochloropsis sp. and Phaeodactylum tricornutum cultivation in a hypothetical tubular photobioreactor. Cultivation processes were calculated according to detailed satellite climatic data for the chosen location in Central Germany. This model was applied to a set of different scenarios, including variations in photobioreactor material, tube diameter, microalgae species, and cultivation season length. Based on these data, a life cycle assessment (LCA) was performed following ISO standard 14040/44. The impact assessment comprised the global warming potential, acidification, eutrophication, cumulative energy demand, and water scarcity. The results showed that a long cultivation season in spring and fall was always preferable in terms of environmental impacts, although productivity decreased significantly due to the climatic preconditions. Acrylic glass as a tube material had higher environmental impacts than all other scenarios. The cultivation of an alternative microalgae species showed only marginal differences in the environmental impacts compared with the baseline scenario. Critical processes in all scenarios included the usage of hydrogen peroxide for the cleaning of the tubes, nitrogen fertilizer, and electricity for mixing, centrifugation, and drying. Microalgae cultivation in a tubular photobioreactor in a “cold-weather” climate for food is sustainable and could possibly be a complement to nutrients from other food groups. The added value of this study lies in the detailed description of a complex and flexible microalgae cultivation model. The new model introduced in this study can be applied to numerous other scenarios to evaluate photoautotrophic microalgae cultivation in tubular photobioreactors. Thus, it is possible to vary the facility location, seasons, scale, tube dimensions and material, microalgae species, nutrient inputs, and flow velocity. Moreover, single processes can easily be complemented or exchanged to further adjust the model individually, if, for instance, another downstream pathway is required.


2013 ◽  
Vol 46 ◽  
pp. 74-82 ◽  
Author(s):  
Jonas Alvaro Kaercher ◽  
Rosana de Cassia de Souza Schneider ◽  
Rodrigo Augusto Klamt ◽  
William Leonardo Teixeira da Silva ◽  
Wiliam Luiz Schmatz ◽  
...  

Biofuels ◽  
2014 ◽  
Vol 5 (3) ◽  
pp. 331-349 ◽  
Author(s):  
Philippa K. Usher ◽  
Andrew B. Ross ◽  
Miller Alonso Camargo-Valero ◽  
Alison S. Tomlin ◽  
William F. Gale

2012 ◽  
Vol 1 (1) ◽  
pp. 83-92 ◽  
Author(s):  
Robert M. Handler ◽  
Christina E. Canter ◽  
Tom N. Kalnes ◽  
F. Stephen Lupton ◽  
Oybek Kholiqov ◽  
...  

e-xacta ◽  
2020 ◽  
Vol 12 (2) ◽  
pp. 11
Author(s):  
Najla Postaue ◽  
Leila Cristina Moraes ◽  
Rosa Maria Farias Asmus

A biomassa de microalgas tem apresentado potencial para produção de biodiesel, contudo a viabilidade do cultivo de microalgas depende de fonte de nutrientes de baixo custo. O presente estudo objetivou utilizar o chorume como fonte de nutrientes para microalgas. Os experimentos foram conduzidos visando avaliar a obtenção da biomassa microalgal, conversão de lipídios e rendimento em ésteres metílicos de ácidos graxos, para os meios de cultivos utilizando 5%, 12% e 20% de chorume, com concentrações de 0,02, 0,05 e 0,08 g N. L-1 e para meio de controle contendo 1% de, Nitrogênio (N), Fósforo (P) e Potássio (K), na concentração de 20 g L-1, 5 g L-1 e 20 g L-1, respectivamente. A microalga utilizada neste trabalho foi a de classe Chlorophyceae e família Coccomyxaceae. Os resultados demonstraram que o meio com concentração de 12% de chorume obteve melhores resultados, possibilitando alcançar 1,19 g de biomassa, conversão de 108,15 mg g-1 de lipídios e conteúdo de ésteres de 410,77mg g-1, a microalga utilizada apresentou ainda predominância dos ácidos graxos palmítico e oleico, apresentando baixa quantidade de ácidos graxos saturados o que pode fornecer ao combustível, resistência ao frio. E tais aspectos demonstraram que o chorume pode ser uma fonte promissora de nutrientes para o cultivo das microalgas estudadas. AbstractMicroalgae biomass has presented potential for biodiesel production, however the viability of microalgae cultivation depends on low cost nutrient source. The present study aimed to use leachate as a source of nutrients for microalgae. The experiments were conducted to evaluate the microalgal biomass, lipid conversion and yield in fatty acid methyl esters, for the culture media using 5%, 12% and 20% leachate, with concentrations of 0.02, 0.05 and 0.08 g N. L-1 and for control medium containing 1% Nitrogen (N), Phosphorus (P) and Potassium (K), at a concentration of 20 g L-1, 5 g L-1 and 20 g L-1, respectively. The microalgae used in this work was Chlorophyceae class and Coccomyxaceae family. The results showed that the medium with a concentration of 12% of leachate obtained better results, allowing to reach 1.19 g of biomass, conversion of 108.15 mg g-1 of lipids and esters content of 410,77 mg g-1. The microalgae used also presented predominance of palmitic and oleic fatty acids, presenting low amount of saturated fatty acids which can provide the fuel with cold resistance. And these aspects demonstrated that the leachate can be a promising source of nutrients for the cultivation of the studied microalgae.


Author(s):  
Marcelo D'Elia Feliciano ◽  
Ana Silvia Prata Soares ◽  
Marcus Bruno Soares Forte ◽  
Beatriz Travalia

The use of lipases as a biocatalyst for industrial applications is an interesting route due to technical aspects but also to reduce environmental impacts caused by the use of chemical catalysts. Gel immobilization of the enzyme allows its reuse and avoids contamination of the product with residual portions of free enzyme. However, a typical technique available for enzyme immobilization is based on dripping driven by gravity which produces big particles and low rate of production. The reduction of size can improve the mass transfer by increasing the contact area. Thus, aiming to increase the rate of particles production and reduce the size of particles, the objective of this work was to encapsulate lipase, using a tool designed to cut the jet produced by pumping, called as Jet Cutter.


Sign in / Sign up

Export Citation Format

Share Document