scholarly journals Excellent piezoelectric constant and thermal stability in BiScO3-PbTiO3 piezoelectric ceramics via domain engineering

Author(s):  
Yazhu Dong ◽  
Zhiyong Zhou ◽  
Ruihong Liang ◽  
Xianlin Dong
2020 ◽  
Vol 46 (2) ◽  
pp. 1390-1395 ◽  
Author(s):  
Weiwei Yang ◽  
Peng Li ◽  
Shuanghao Wu ◽  
Feng Li ◽  
Bo Shen ◽  
...  

2019 ◽  
Vol 103 (1) ◽  
pp. 374-381 ◽  
Author(s):  
Jianguo Chen ◽  
Jinrong Cheng ◽  
Jian Guo ◽  
Zhenxiang Cheng ◽  
Jianli Wang ◽  
...  

2014 ◽  
Vol 602-603 ◽  
pp. 826-829
Author(s):  
Hong Yun Ma ◽  
Yan Gai Liu ◽  
Jin Qiu Zhao ◽  
Zhao Hui Huang ◽  
Ming Hao Fang

In this paper, the KNN powders with Li+ substituted (K0.5Na0.5)+ were prepared by the sol-gel method in order to make powders pure, (Na0.50+xK0.50-2xLix) -NbO3 (x=0, 0.04, 0.06, 0.08) ceramics were prepared by pressureless sintering. The phase composition of powders was determined by XRD. The effects of the Li+ substitution on piezoelectric and ferroelectric properties of ceramics were systematically studied for determining optimal Li+ content. Li+ can significantly increase the piezoelectric constant of ceramic. When Li+ content was 0.04, piezoelectric properties of ceramics were the best, d33=115 pC/N, Pr=6.35 μC/cm2, Ec=14.24 kV/cm.


2020 ◽  
Author(s):  
Enling Tang ◽  
Hetong Yin ◽  
Yafei Han ◽  
Chuang Chen

Abstract In order to study the electromechanical characteristics of PZT-5H in the temperature range of -40~25℃under the impact loading, the electrostatic parameters of PZT-5H at different temperatures are measured, the liquid nitrogen cooling/Hopkinson mechanical property and piezoelectric ceramic voltage output testing system are built, Hopkinson experiments at different temperatures (-40℃, -25℃, -10℃, 0℃ and 25℃) and different impact velocities are carried out. Experimental results show that , the resistivity and relative permittivity decrease with the temperature of PZT-5H decreasing from 25℃ to -40℃, and the relative permittivity decrease about 27.92%, and the relaxation time is also deduced. By scanning electron microscope (SEM) and Energy Dispersive Spectrometer (EDS) observation, it is found that the blowhole defects and cracks of the piezoelectric ceramics have obvious effects on the electrical output characteristics of piezoelectric ceramics when the piezoelectric ceramics are struck. Based on the analysis of space charge theory, the freezing effect of piezoelectric ceramics caused by the obstruction of domain motion at low temperature is obtained. And the dynamic piezoelectric constant in the elastic region measured is about 1.66 times that of the static piezoelectric constant, which indicates that the relative dielectric constant of the piezoelectric ceramic has changed significantly under dynamic loading.


Sign in / Sign up

Export Citation Format

Share Document