Asymmetric Incremental Sheet Forming (AISF) is a process for the flexible production of sheet metal parts. In AISF, a part is obtained as the sum of localized plastic deformations produced by a simple forming tool that, in most configurations, moves under CNC control. Flexible processes with low tooling effort like AISF are suitable for sectors with small lot sizes but premium products, e.g. for the aviation and the automotive sector. Four main process limits restrict the range of application of AISF and its take-up in industry. These are: (i) material thinning, (ii) limited geometrical accuracy, (iii) the process duration and (iv) the calculation time and accuracy of process modelling. Moreover, the material spectrum of AISF for structural parts is mostly restricted to cold workable materials like steel and aluminum. This paper presents some new investigations of incremental sheet forming combined with laser heating or stretch forming as possible hybrid approaches to overcome the above mentioned limitations of AISF. These hybrid incremental sheet forming processes can increase the technological and economical potentials of AISF. A possible application is the fabrication of lightweight sheet metal parts as individual parts or small batches, e.g. for the aerospace industry. The present study provides a short overview of the state of the art of AISF, introduces the new hybrid process variations of AISF and compares the capabilities of the hybrid processes and the standard AISF process. Finally, two examples for applications are presented: (i) the production of a part used in an airplane for which the manufacturing steps consist of die manufacture, sheet metal forming by means of stretch forming combined with AISF and a final trimming operation using a single hybrid machine set-up; (ii) laser-assisted AISF for magnesium alloys.
The Development of Incremental Sheet Forming from Flexible Forming to Fully Integrated Production of Sheet Metal Parts
