A modeling and resolution framework for wrinkling in hyperelastic sheets at finite membrane strain

2019 ◽  
Vol 124 ◽  
pp. 446-470 ◽  
Author(s):  
C. Fu ◽  
T. Wang ◽  
F. Xu ◽  
Y. Huo ◽  
M. Potier-Ferry
Keyword(s):  
2018 ◽  
Vol 21 (2) ◽  
pp. 80-84 ◽  
Author(s):  
Retno Ariadi Lusiana ◽  
Vivi Dia Ahmad Sangkota ◽  
Sri Juari Santosa

Evaluation character of chitosan membrane-succinate / poly vinyl alcohol-poly ethylene glycol (PVA-PEG) were prepared in acetic acid solvent through a phase inversion method has been performed. The study began with the preparation of crosslinked chitosan compounds with succinic acid, followed by preparation into membrane by combining PVA-PEG. Character analysis of the resulting material using FTIR, EDX, TGA, water absorption test, tensile strength, membrane hydrophilicity. The ability of membrane permeation was tested against creatinine. The results showed that the succinate had reacted with chitosan. Chitosan modification through cross link and polymer alloys increases tensile strength and membrane strain of 1.7-2.5 x of pure chitosan membrane. In addition, the modified membrane also has higher water absorption and hydrophilicity values than the unmodified membrane, and this implies the ability of membrane-induced creatinine permeation. Permeable permeation values were 13.8% in chitosan, 24.84% on chitosan-succinate and 25% in chitosan-succinate / PVA-PEG. Chitosan-succinate membranes have the ability to use more than 4x repeated use.


1990 ◽  
Vol 14 (5) ◽  
pp. 43-45 ◽  
Author(s):  
J.A. Gilbert ◽  
A.J. Banes ◽  
G.W. Link ◽  
G.L. Jones

1986 ◽  
Vol 53 (2) ◽  
pp. 278-290 ◽  
Author(s):  
K. C. Park ◽  
G. M. Stanley

A curved C0 shell element is presented, which corrects several deficiencies in existing quadratic shell elements. The improvements realized in the present element include rank sufficiency without transverse shear locking, consistent membrane strain interpolation that admits inextensional bending without reduced integration, and adequate representation of curvature effects to capture the important membrane-bending coupling. The element can be constructed either by a nine-point integration rule or by a four-point integration rule with the proper rank compensating terms. Numerical experiments with the present element on several benchmark problems indicate that the element yields accurate and reliable solutions without any ostensible deficiency. The element is recommended for production analysis of shell structures.


1995 ◽  
Vol 22 (16) ◽  
pp. 2321-2324 ◽  
Author(s):  
Kenneth C. Creager ◽  
Ling-Yun Chiao ◽  
John P. Winchester ◽  
E. Robert Engdahl

2008 ◽  
Vol 136 ◽  
pp. 109-114
Author(s):  
Madusudhanan R. Parlapalli ◽  
Kwok C. Soh ◽  
Dong Wei Shu

In the present paper, effects of through-the-thickness stitching of delaminated glass/epoxy composite laminates with two different types of aramid threads, Kevlar® and Twaron® threads, on the buckling loads are studied. The buckling loads are predicted based on the Southwell, Vertical displacement and Membrane strain plot methods from the experimental data. Flexural modulus of the stitched and unstitched glass/epoxy composite laminates, knot tensile strength of Kevlar® and Twaron® stitching threads are obtained experimentally. From the Southwell, Vertical displacement and Membrane strain plot methods it is observed that stitching either by Kevlar® or Twaron® threads is effective in improving the buckling strength of glass/epoxy composite laminates when the delamination length is greater than 0.5L, L is the length of the laminate.


2004 ◽  
Vol 87 (4) ◽  
pp. 2870-2884 ◽  
Author(s):  
Guillaume T. Charras ◽  
Beatrice A. Williams ◽  
Stephen M. Sims ◽  
Mike A. Horton

1998 ◽  
Vol 274 (5) ◽  
pp. C1283-C1289 ◽  
Author(s):  
Jacob Pourati ◽  
Andrew Maniotis ◽  
David Spiegel ◽  
Jonathan L. Schaffer ◽  
James P. Butler ◽  
...  

We tested the hypothesis that mechanical tension in the cytoskeleton (CSK) is a major determinant of cell deformability. To confirm that tension was present in adherent endothelial cells, we either cut or detached them from their basal surface by a microneedle. After cutting or detachment, the cells rapidly retracted. This retraction was prevented, however, if the CSK actin lattice was disrupted by cytochalasin D (Cyto D). These results confirmed that there was preexisting CSK tension in these cells and that the actin lattice was a primary stress-bearing component of the CSK. Second, to determine the extent to which that preexisting CSK tension could alter cell deformability, we developed a stretchable cell culture membrane system to impose a rapid mechanical distension (and presumably a rapid increase in CSK tension) on adherent endothelial cells. Altered cell deformability was quantitated as the shear stiffness measured by magnetic twisting cytometry. When membrane strain increased 2.5 or 5%, the cell stiffness increased 15 and 30%, respectively. Disruption of actin lattice with Cyto D abolished this stretch-induced increase in stiffness, demonstrating that the increased stiffness depended on the integrity of the actin CSK. Permeabilizing the cells with saponin and washing away ATP and Ca2+ did not inhibit the stretch-induced stiffening of the cell. These results suggest that the stretch-induced stiffening was primarily due to the direct mechanical changes in the forces distending the CSK but not to ATP- or Ca2+-dependent processes. Taken together, these results suggest preexisting CSK tension is a major determinant of cell deformability in adherent endothelial cells.


Sign in / Sign up

Export Citation Format

Share Document