The effect of crack tip environment on crack growth behaviour of a low alloy steel at cathodic potentials in artificial seawater

2020 ◽  
Vol 54 ◽  
pp. 119-131 ◽  
Author(s):  
Yong Li ◽  
Zhiyong Liu ◽  
Endian Fan ◽  
Zhongyu Cui ◽  
Jinbin Zhao
Keyword(s):  
Crack Growth ◽  
Alloy Steel ◽  
Crack Tip ◽  
Artificial Seawater ◽  
Low Alloy Steel ◽  
Growth Behaviour ◽  
Crack Growth Behaviour

Effect of Constraint Induced by Specimen Geometries on Crack Growth Behavior Under Creep-Fatigue Interaction

2018 ◽  
Author(s):  
Lei Zhao ◽  
Lianyong Xu
Keyword(s):  
Growth Rate ◽  
Crack Growth Rate ◽  
Crack Growth ◽  
Growth Rates ◽  
Crack Tip ◽  
Crack Growth Behavior ◽  
Growth Behaviour ◽  
Crack Growth Behaviour ◽  
Creep Fatigue ◽  
Crack Growth Rates

Creep-fatigue interaction would accelerate the crack growth behaviour and change the crack growth mode, which is different from that presenting in pure creep or fatigue regimes. In addition, the constraint ahead of crack tip affects the relationship between crack growth rate and fracture mechanics and thus affects the accuracy of the life prediction for high-temperature components containing defects. In this study, to reveal the role of constraint caused by various specimen geometries in the creep-fatigue regime, five different types of cracked specimens (including C-ring in tension CST, compact tension CT, single notch tension SENT, single notch bend SENB, middle tension MT) were employed. The crack growth and damage evolution behaviours were simulated using finite element method based on a non-linear creep-fatigue interaction damage model considering creep damage, fatigue damage and interaction damage. The expression of (Ct)avg for different specimen geometries were given. Then, the variation of crack growth behaviour with various specimen geometries under creep-fatigue conditions were analysed. CT and CST showed the highest crack growth rates, which were ten times as the lowest crack growth rates in MT. This revealed that distinctions in specimen geometry influenced the in-plane constraint level ahead of crack tip. Furthermore, a load-independent constraint parameter Q* was introduced to correlate the crack growth rate. The sequence of crack growth rate at a given value of (Ct)avg was same to the reduction of Q*, which shown a linear relation in log-log curve.

scholarly journals Peridynamic Simulation of Fatigue Crack Growth Behaviour with the Effect of Microstructure

2018 ◽  
Vol 165 ◽  
pp. 04003
Author(s):  
Binchao Liu ◽  
Rui Bao ◽  
Yamei Niu ◽  
Songsong Lu ◽  
Kai Wang
Keyword(s):  
Crack Growth ◽  
Main Crack ◽  
Crack Tip ◽  
Special Kind ◽  
Crack Branching ◽  
Secondary Crack ◽  
Growth Behaviour ◽  
Crack Growth Behaviour ◽  
Growth Modes ◽  
Pairwise Force

The purpose of this paper is to explore the influences of microstructures on crack growth behaviour in 2324-T39 aluminum alloy based on peridynamic(PD) theory. The microelastic bond-based peridynamic constitutive is modified as microplastic to describe the plasticity of aluminum alloys. A new method to establish polycrystalline models based on metallographs is adopted, and grains are reflected in simulations by setting transgranular and intergranular pairwise force in the corresponding bonds. Two kinds of microstructures are modeled according to metallographs, and a special kind of crack branch resulted from the link-up of the secondary crack with the main crack and the growth of the branched crack is successfully captured. The PD simulations reveal that microstructure orientation characteristics have an impact on crack propagation paths and crack growth modes, and it is easier for the secondary-crack resulted macroscopic crack branching to appear if grain boundaries locate not too close to the leading crack tip but within the crack tip plastic zone. The numerical results are verified by experiments and fractographic analysis.

Sign in / Sign up

Export Citation Format

Share Document