A method and analysis of predicting building material U-value ranges through geometrical pattern clustering

2021 ◽  
pp. 103243
Author(s):  
S. Klemp ◽  
A. Abida ◽  
P. Richter
1985 ◽  
Vol 46 (C8) ◽  
pp. C8-379-C8-383 ◽  
Author(s):  
R. Hosemann
Keyword(s):  

2020 ◽  
pp. 50-64
Author(s):  
Kuladeep Kumar Sadevi ◽  
Avlokita Agrawal

With the rise in awareness of energy efficient buildings and adoption of mandatory energy conservation codes across the globe, significant change is being observed in the way the buildings are designed. With the launch of Energy Conservation Building Code (ECBC) in India, climate responsive designs and passive cooling techniques are being explored increasingly in building designs. Of all the building envelope components, roof surface has been identified as the most significant with respect to the heat gain due to the incident solar radiation on buildings, especially in tropical climatic conditions. Since ECBC specifies stringent U-Values for roof assembly, use of insulating materials is becoming popular. Along with insulation, the shading of the roof is also observed to be an important strategy for improving thermal performance of the building, especially in Warm and humid climatic conditions. This study intends to assess the impact of roof shading on building’s energy performance in comparison to that of exposed roof with insulation. A typical office building with specific geometry and schedules has been identified as base case model for this study. This building is simulated using energy modelling software ‘Design Builder’ with base case parameters as prescribed in ECBC. Further, the same building has been simulated parametrically adjusting the amount of roof insulation and roof shading simultaneously. The overall energy consumption and the envelope performance of the top floor are extracted for analysis. The results indicate that the roof shading is an effective passive cooling strategy for both naturally ventilated and air conditioned buildings in Warm and humid climates of India. It is also observed that a fully shaded roof outperforms the insulated roof as per ECBC prescription. Provision of shading over roof reduces the annual energy consumption of building in case of both insulated and uninsulated roofs. However, the impact is higher for uninsulated roofs (U-Value of 3.933 W/m2K), being 4.18% as compared to 0.59% for insulated roofs (U-Value of 0.33 W/m2K).While the general assumption is that roof insulation helps in reducing the energy consumption in tropical buildings, it is observed to be the other way when insulation is provided with roof shading. It is due to restricted heat loss during night.


2020 ◽  
Vol 6 (1) ◽  
pp. 39
Author(s):  
Mohd Fisal Ishak ◽  
Kartina Alauddin ◽  
Mohd Shahrol Hafiz Ibrahim

Payment in the Malaysian construction industry has generally been an issue of concern. Late and non-payment problem is endemic in construction and needs to be addressed. The aim of this study is to investigate the issues related to late and non-payment based on the building materials suppliers’ perspective. Questionnaires were distributed to suppliers of building materials in the Klang Valley. Findings from the study shows the main cause of late and non-payment is the paymaster’s poor financial management while the main effect of late and non-payment is problem with the cash flow.  The most recommended possible solution to cope with the issue is for the paymaster to conduct training on financial and cash flow management to the management team in the company.  


2017 ◽  
Vol 748 (5) ◽  
pp. 16-19 ◽  
Author(s):  
N.S. SOKOLOV ◽  
◽  
S.N. SOKOLOV ◽  
A.N. SOKOLOV ◽  
◽  
...  
Keyword(s):  

2020 ◽  
Vol 13 (2) ◽  
pp. 44-54
Author(s):  
Hendrico Firzandy Latupeirissa ◽  
Gierlang Bhakti Putra ◽  
Niki Prastomo

Brick debris that makes up the majority of construction waste has not received proper waste disposal in Indonesia. On the other hand, brick debris could be potentially reused as non-structural building materials to reduce its negative impact on the environment. This study aims to test the effectiveness of soundproofing on recycled brick debris. The soundproof test was carried out on brick debris in the form of fine and coarse grains. The simulation box is then used as a support for the brickwork material and then the box is exposed to a sound source with a certain level of noise that is considered disturbing human comfort. Noise level measurements are made in the outside and inside the box. These measurements are tabulated and then analyzed to see the success of the two aggregates in reducing noise. Basically, the brickwork material has succeeded in becoming a recycled building material that can absorb noise, although further research must be carried out to be able to state that this material is truly ready to be used as an alternative building material with good acoustic capabilities.


Sign in / Sign up

Export Citation Format

Share Document