Alternative small-scale accelerated test to measure the effect of thermal shock on rendering mortar properties

2022 ◽  
Vol 46 ◽  
pp. 103807
Author(s):  
Bruno L. Nenevê ◽  
Marienne R.M.M. Costa ◽  
Ronaldo A. Medeiros-Junior
Keyword(s):  
Thermal Shock ◽  
Small Scale ◽  
Accelerated Test

Utilization of the Ibai River Sediment as a Raw Material for Producing Ceramic Glazes

2015 ◽  
Vol 1112 ◽  
pp. 524-527
Author(s):  
Ng Siau Wei ◽  
Mohd Al Amin Muhamad Nor
Keyword(s):  
Thermal Shock ◽  
Thermal Shock Resistance ◽  
Local Community ◽  
River Sediment ◽  
Chemical Resistance ◽  
Raw Material ◽  
Firing Process ◽  
Small Scale ◽  
High Concentration ◽  
Shock Resistance

Glazes is a layer of vitreous substance, which is combined to ceramic object through a firing process. The aim of this study is to evaluate the potential of Ibai River sediment as raw material for producing ceramic glazes. Minerals and heavy metal in sediment have been characterized using Atomic Absorption Spectroscopy (AAS) and X-Ray Fluorescence (XRF). Glazes formulation has been studied by adding CaCO3 and stoneware into the sediment at different compositions. Glazes sample was tested for chemical resistance and thermal shock resistance. The AAS results show that sediment contains high Fe content of 65.5000 ppm while amount of Cr, Co and Pb are less than 0.4850 ppm. XRF analysis shows that the presence of important minerals in sediment, which is commonly found in commercial glazes formulation and contributes to formation of good glazes. Matte glazes can be obtained by using only sediment while shiny glaze can be obtained by adding CaCO3 to the sediment as fluxs. High concentration of iron in sediments contributed to brown or reddish brown in color of glazes products. The results show that the glazes produced has chemical resistance towards acids and high thermal shock resistance. As a conclusion, the Ibai River sediment is highly suitable to supply abundant and cheap raw materials for producing decorative ceramic glaze for small-scale ceramic industry in Terengganu, which generate new economic source for local community.

Thermal shock behaviors of Ti1−xZrxN coatings by accelerated test based on pulsed laser ablation

2016 ◽  
Vol 42 (2) ◽  
pp. 2241-2249 ◽  
Author(s):  
Seol Jeon ◽  
Buyoung Kim ◽  
Youngkue Choi ◽  
Ilguk Jo ◽  
Heesoo Lee
Keyword(s):  
Laser Ablation ◽  
Thermal Shock ◽  
Pulsed Laser ◽  
Pulsed Laser Ablation ◽  
Accelerated Test

Reasons to strike first

2019 ◽  
Vol 42 ◽  
Author(s):  
William Buckner ◽  
Luke Glowacki
Keyword(s):  
Intergroup Conflict ◽  
Small Scale

Abstract De Dreu and Gross predict that attackers will have more difficulty winning conflicts than defenders. As their analysis is presumed to capture the dynamics of decentralized conflict, we consider how their framework compares with ethnographic evidence from small-scale societies, as well as chimpanzee patterns of intergroup conflict. In these contexts, attackers have significantly more success in conflict than predicted by De Dreu and Gross's model. We discuss the possible reasons for this disparity.

Exploring Coronal Structures with SOHO

2000 ◽  
Vol 179 ◽  
pp. 403-406
Author(s):  
M. Karovska ◽  
B. Wood ◽  
J. Chen ◽  
J. Cook ◽  
R. Howard
Keyword(s):  
Solar Corona ◽  
Image Enhancement ◽  
Coronal Mass Ejections ◽  
Dynamical Evolution ◽  
Small Scale ◽  
Low Contrast ◽  
Contrast Structures ◽  
Scale Structures ◽  
Small Scale Structures ◽  
Coronal Structures

AbstractWe applied advanced image enhancement techniques to explore in detail the characteristics of the small-scale structures and/or the low contrast structures in several Coronal Mass Ejections (CMEs) observed by SOHO. We highlight here the results from our studies of the morphology and dynamical evolution of CME structures in the solar corona using two instruments on board SOHO: LASCO and EIT.

A controller for safe, convenient operation of LaB6 emitters on electron-beam instruments

1983 ◽  
Vol 41 ◽  
pp. 408-409
Author(s):  
W. J. Abramson ◽  
H. W. Estry ◽  
L. F. Allard
Keyword(s):  
Electron Beam ◽  
Control System ◽  
Thermal Shock ◽  
Appropriate Care ◽  
Electron Guns ◽  
Tungsten Filaments ◽  
Order Of Magnitude ◽  
Main Components

LaB6 emitters are becoming increasingly popular as direct replacements for tungsten filaments in the electron guns of modern electron-beam instruments. These emitters offer order of magnitude increases in beam brightness, and, with appropriate care in operation, a corresponding increase in source lifetime. They are, however, an order of magnitude more expensive, and may be easily damaged (by improper vacuum conditions and thermal shock) during saturation/desaturation operations. These operations typically require several minutes of an operator's attention, which becomes tedious and subject to error, particularly since the emitter must be cooled during sample exchanges to minimize damage from random vacuum excursions. We have designed a control system for LaBg emitters which relieves the operator of the necessity for manually controlling the emitter power, minimizes the danger of accidental improper operation, and makes the use of these emitters routine on multi-user instruments.Figure 1 is a block schematic of the main components of the control system, and Figure 2 shows the control box.

Scanning tunneling microscopy and atomic force microscopy: New tools for biology

1989 ◽  
Vol 47 ◽  
pp. 778-779
Author(s):  
CE Bracker ◽  
P. K. Hansma
Keyword(s):  
Physical Property ◽  
Scanning Probe ◽  
Scanning Tunneling ◽  
Small Scale ◽  
Tunneling Microscopy ◽  
Force Microscopy ◽  
New Family ◽  
Small Probe ◽  
Atomic Force ◽  
Transmission Electron

A new family of scanning probe microscopes has emerged that is opening new horizons for investigating the fine structure of matter. The earliest and best known of these instruments is the scanning tunneling microscope (STM). First published in 1982, the STM earned the 1986 Nobel Prize in Physics for two of its inventors, G. Binnig and H. Rohrer. They shared the prize with E. Ruska for his work that had led to the development of the transmission electron microscope half a century earlier. It seems appropriate that the award embodied this particular blend of the old and the new because it demonstrated to the world a long overdue respect for the enormous contributions electron microscopy has made to the understanding of matter, and at the same time it signalled the dawn of a new age in microscopy. What we are seeing is a revolution in microscopy and a redefinition of the concept of a microscope.Several kinds of scanning probe microscopes now exist, and the number is increasing. What they share in common is a small probe that is scanned over the surface of a specimen and measures a physical property on a very small scale, at or near the surface. Scanning probes can measure temperature, magnetic fields, tunneling currents, voltage, force, and ion currents, among others.

Superstructures and ordering phenomena in ceramic superconductors

1996 ◽  
Vol 54 ◽  
pp. 710-711
Author(s):  
R. Gronsky
Keyword(s):  
Domain Growth ◽  
Small Displacement ◽  
Small Scale ◽  
Ceramic Superconductors ◽  
Oxygen Sublattices ◽  
Tweed Contrast ◽  
Diffraction Patterns ◽  
Representative Image ◽  
Static Lattice ◽  
Modulation Wavelength

It is now well established that the phase transformation behavior of YBa2Cu3O6+δ is significantly influenced by matrix strain effects, as evidenced by the formation of accommodation twins, the occurrence of diffuse scattering in diffraction patterns, the appearance of tweed contrast in electron micrographs, and the generation of displacive modulation superstructures, all of which have been successfully modeled via simple Monte Carlo simulations. The model is based upon a static lattice formulation with two types of excitations, one of which is a change in oxygen occupancy, and the other a small displacement of both the copper and oxygen sublattices. Results of these simulations show that a displacive superstructure forms very rapidly in a morphology of finely textured domains, followed by domain growth and a more sharply defined modulation wavelength, ultimately evolving into a strong <110> tweed with 5 nm to 7 nm period. What is new about these findings is the revelation that both the small-scale deformation superstructures and coarser tweed morphologies can result from displacive modulations in ordered YBa2Cu3O6+δ and need not be restricted to domain coarsening of the disordered phase. Figures 1 and 2 show a representative image and diffraction pattern for fully-ordered (δ = 1) YBa2Cu3O6+δ associated with a long-period <110> modulation.

Indirect Assessment of Attitudes with Response-Time-Based Measures

2006 ◽  
Vol 37 (3) ◽  
pp. 131-139 ◽  
Author(s):  
Juliane Degner ◽  
Dirk Wentura ◽  
Klaus Rothermund
Keyword(s):  
Social Cognitive ◽  
Incremental Validity ◽  
Self Report ◽  
Small Scale ◽  
Implicit Measures ◽  
Scale Theory ◽  
Starting Point ◽  
Self Reports ◽  
Predicting Behavior ◽  
Social Cognitive Theories

Abstract: We review research on response-latency based (“implicit”) measures of attitudes by examining what hopes and intentions researchers have associated with their usage. We identified the hopes of (1) gaining better measures of interindividual differences in attitudes as compared to self-report measures (quality hope); (2) better predicting behavior, or predicting other behaviors, as compared to self-reports (incremental validity hope); (3) linking social-cognitive theories more adequately to empirical research (theory-link hope). We argue that the third hope should be the starting point for using these measures. Any attempt to improve these measures should include the search for a small-scale theory that adequately explains the basic effects found with such a measure. To date, small-scale theories for different measures are not equally well developed.

Small-Scale Science to Large-Scale Profession

2000 ◽  
Vol 45 (4) ◽  
pp. 396-398
Author(s):  
Roger Smith
Keyword(s):  
Large Scale ◽  
Small Scale
Sign in / Sign up

Export Citation Format

Share Document