The Biomechanical Effect of Bone Grafting and Bone Graft Remodeling in Shoulder Instability Patients

2021 ◽  
Vol 30 (7) ◽  
pp. e429
Author(s):  
Elisabeth Böhm ◽  
Bastian Sigrist ◽  
Stephen Ferguson ◽  
Christian Jung ◽  
Markus Scheibel ◽  
...  
2020 ◽  
Vol 48 (8) ◽  
pp. 1857-1864 ◽  
Author(s):  
Bastian Sigrist ◽  
Stephen Ferguson ◽  
Elisabeth Boehm ◽  
Christian Jung ◽  
Markus Scheibel ◽  
...  

Background: Individual constitutional differences in glenoid shape and bone remodeling require a patient-specific and longitudinal approach to evaluate the biomechanical effects of glenoid bone grafting in patients with anterior shoulder instability. Purpose: To quantify the longitudinal, in vivo, biomechanical effects of bone grafting, bone graft remodeling, and glenoid shape in patients with anterior shoulder instability by means of patient-specific finite element models. Study Design: Descriptive laboratory study. Methods: In total, 25 shoulders of 24 patients with anterior shoulder instability and anterior glenoid bone loss underwent an arthroscopic iliac crest bone graft transfer (ICBGT) procedure with either autologous or allogenic bone. Patient-specific finite element simulations based on preoperative, postoperative, and follow-up computed tomography scans were used to quantify the bone-mediated stability ratio (SR) and the distance to dislocation. Additionally, the relationship between glenoid morphological parameters and the SR was assessed. Results: The ICBGT procedure significantly increased the SR and distance to dislocation in the 2-, 3-, and 4-o’clock directions immediately after the surgical intervention ( P < .01) in both the autograft and the allograft groups. Although the SR and distance to dislocation decreased subsequently, autografts showed long-term effects on SR and dislocation distance in the 3-o’clock direction ( P < .01) and on SR in the 4-o’clock direction ( P < .01). Allografts showed no significant effect on SR and dislocation distance in long-term follow-up ( P > .05). Overall, glenoid retroversion as well as cavity depth predicted stability in all 4 dislocation directions, with glenoid cavity depth showing the highest correlation coefficients ( R = 0.71, 0.8, 0.73, and 0.7 for 2-, 3-, 4-, and 5-o’clock, respectively). Conclusion: The autologous ICBGT procedure biomechanically improved anterior shoulder stability in long-term follow-up, whereas the use of allografts did not show any bone-mediated biomechanical effect at follow-up due to resorption. Furthermore, in addition to measurements of defect extent, the glenoid depth and version seem to be useful parameters to determine the biomechanical effect and need for glenoid bone grafting in patients with shoulder instability. Clinical Relevance: This study proposes the use of autologous bone grafts for a successful long-term stabilization effect. Additionally, this study proposes additional glenoid morphological measures to predict shoulder stability.


2021 ◽  
Vol 11 (4) ◽  
pp. 1906
Author(s):  
Marwa Y. Shaheen ◽  
Amani M. Basudan ◽  
Abdurahman A. Niazy ◽  
Jeroen J. J. P. van den Beucken ◽  
John A. Jansen ◽  
...  

The aim of this study was to evaluate the regeneration of bone defects created in the femoral condyle of osteoporotic rats, following intravenous (IV) zoledronate (ZA) treatment in three settings: pre-bone grafting (ZA-Pre), post-bone grafting (ZA-Post), and pre- plus post-bone grafting (ZA-Pre+Post). Twenty-four female Wistar rats were ovariectomized (OVX). After 12 weeks, bone defects were created in the left femoral condyle. All defects were grafted with a particulate inorganic cancellous bovine bone substitute. ZA (0.04 mg/kg, weekly) was administered to six rats 4 weeks pre-bone graft placement. To another six rats, ZA was given post-bone graft placement creation and continued for 6 weeks. Additional six rats received ZA treatment pre- and post-bone graft placement. Control animals received weekly saline intravenous injections. At 6 weeks post-bone graft placement, samples were retrieved for histological evaluation of the bone area percentage (BA%) and remaining bone graft percentage (RBG%). BA% for ZA-Pre (50.1 ± 3.5%) and ZA-Post (49.2 ± 8.2%) rats was significantly increased compared to that of the controls (35.4 ± 5.4%, p-value 0.031 and 0.043, respectively). In contrast, ZA-Pre+Post rats (40.7 ± 16.0%) showed similar BA% compared to saline controls (p = 0.663). For RBG%, all experimental groups showed similar results ranging from 36.3 to 47.1%. Our data indicate that pre- or post-surgical systemic IV administration of ZA improves the regeneration of bone defects grafted with inorganic cancellous bovine-bone particles in osteoporotic bone conditions. However, no favorable effect on bone repair was seen for continued pre- plus post-surgical ZA treatment.


Author(s):  
Reham AlJasser ◽  
Sundus Bukhary ◽  
Mohammed AlSarhan ◽  
Dalal Alotaibi ◽  
Saleh AlOraini ◽  
...  

The aim of this in-vivo study was to evaluate/compare the clinical periodontal parameters in patients with true combined endo-perio lesions (EPL), treated with gutta-percha (GP) and mineral trioxide (MTA) as an obturation material alone and with addition of bone grafting in such lesions. 120 Saudi patients (mean age = 41yrs) diagnosed with true combined EPL participated in this study. Group I (control group, n = 30) was treated with conventional endodontic treatment using GP for obturation. Group II (n = 30) was treated with conventional endodontic treatment using MTA for obturation. Group III (n = 30) was treated with conventional endodontic treatment using GP for obturation + grafting procedure to fill the bony defect. Group IV (n = 30) was treated with conventional endodontic treatment using MTA for obturation + grafting procedure to fill the bony defect. Clinical parameters (Pocket depth (PD); Clinical attachment loss (CAL); keratinized tissue width (KTW); gingival phenotype (G.Ph.) and Cone Beam Computed Tomography Periapical Index (CBCTPAI)) were recorded and compared at baseline, 3, 6, 12 months’ interval. For the groups III and IV, CBCTPAI showed significant difference (p < 0.0001) with the other groups at 6 months and 1-year interval. The group with MTA + bone graft showed 76% and 90% patients with 0 score at 6 months and 1-year follow-up, respectively. Comparison of mean values of PD among study groups at 3 months, 6 months and 1 year showed significant difference at 3 months, whereas the mean PD values of subjects in GP + bone graft showed significantly higher PD values than other 3 groups (p = 0.025). Use of GP and MTA for root canal obturation along with periodontal therapy and bone augmentation helps in resolving complex endo-perio lesions. Bone grafting in addition to obturation with MTA was found to be the best treatment strategy in management of EPL cases and is recommended for clinicians who are treating EPL patients.


Author(s):  
Schneider K. Rancy ◽  
Scott W. Wolfe ◽  
J. Terrence Jose Jerome

Abstract Objective This article compares predictors of failure for vascularized (VBG) and nonvascularized bone grafting (NVBG) of scaphoid nonunions. Methods We conducted a systematic literature review of outcomes after VBG and NVBG of scaphoid nonunion. Fifty-one VBG studies (N = 1,419 patients) and 81 NVBG studies (N = 3,019 patients) met the inclusion criteria. Data were collected on surgical technique, type of fixation, time from injury to surgery, fracture location, abnormal carpal posture (humpback deformity and/or dorsal intercalated segmental instability [DISI]), radiographic parameters of carpal alignment, prior failed surgery, smoking status, and avascular necrosis (AVN) as defined by punctate bleeding, magnetic resonance imaging (MRI) with contrast, MRI without contrast, X-ray, and histology. Meta-analysis of proportions was conducted with Freeman–Tukey double arcsine transformation. Multilevel mixed-effects analyses were performed with univariable and multivariable Poisson regression to identify confounders and evaluate predictors of failure. Results The pooled failure incidence effect size was comparable between VBG and NVBG (0.09 [95% confidence interval [CI] 0.05–0.13] and 0.08 [95% CI 0.06–0.11], respectively). Humpback deformity and/or DISI (incidence-rate radios [IRRs] 1.57, CI: 1.04–2.36) and lateral intrascaphoid angle (IRR 1.21, CI: 1.08–1.37) were significantly associated with an increased VBG failure incidence. Time from injury to surgery (IRR 1.09, CI: 1.06–1.12) and height-to-length (H/L) ratio (IRR 53.98, CI: 1.16–2,504.24) were significantly associated with an increased NVBG failure incidence, though H/L ratio demonstrated a wide CI. Decreased proximal fragment contrast uptake on MRI was a statistically significant predictor of increased failure incidence for both VBG (IRR 2.03 CI: 1.13–3.66) and NVBG (IRR 1.39, CI: 1.16–1.66). Punctate bleeding or radiographic AVN, scapholunate angle, radiolunate angle, and prior failed surgery were not associated with failure incidence for either bone graft type (p > 0.05). Conclusion Humpback deformity and/or DISI and increasing lateral intrascaphoid angle may be predictors of VBG failure. Time from injury to surgery may be a predictor of NVBG failure. AVN as defined by decreased contrast uptake on MRI may be a marker of increased failure risk for both bone graft types.


2017 ◽  
Vol 45 (12) ◽  
pp. 2849-2857 ◽  
Author(s):  
Leo Pauzenberger ◽  
Felix Dyrna ◽  
Elifho Obopilwe ◽  
Philipp R. Heuberer ◽  
Robert A. Arciero ◽  
...  

Background: The anatomic restoration of glenoid morphology with an implant-free J-shaped iliac crest bone graft offers an alternative to currently widely used glenoid reconstruction techniques. No biomechanical data on the J-bone grafting technique are currently available. Purpose: To evaluate (1) glenohumeral contact patterns, (2) graft fixation under cyclic loading, and (3) the initial stabilizing effect of anatomic glenoid reconstruction with the implant-free J-bone grafting technique. Study Design: Controlled laboratory study. Methods: Eight fresh-frozen cadaveric shoulders and J-shaped iliac crest bone grafts were used for this study. J-bone grafts were harvested, prepared, and implanted according to a previously described, clinically used technique. Glenohumeral contact patterns were measured using dynamic pressure-sensitive sensors under a compressive load of 440 N with the humerus in (a) 30° of abduction, (b) 30° of abduction and 60° of external rotation, (c) 60° of abduction, and (d) 60° of abduction and 60° of external rotation. Using a custom shoulder-testing system allowing positioning with 6 degrees of freedom, a compressive load of 50 N was applied, and the peak force needed to translate the humeral head 10 mm anteriorly at a rate of 2.0 mm/s was recorded. All tests were performed (1) for the intact glenoid, (2) after the creation of a 30% anterior osseous glenoid defect parallel to the longitudinal axis of the glenoid, and (3) after anatomic glenoid reconstruction with an implant-free J-bone graft. Furthermore, after glenoid reconstruction, each specimen was translated anteriorly for 5 mm at a rate of 4.0 mm/s for a total of 3000 cycles while logging graft protrusion and mediolateral bending motions. Graft micromovements were recorded using 2 high-resolution, linear differential variable reluctance transducer strain gauges placed in line with the long leg of the graft and the mediolateral direction, respectively. Results: The creation of a 30% glenoid defect significantly decreased glenohumeral contact areas ( P < .05) but significantly increased contact pressures at all abduction and rotation positions ( P < .05). Glenoid reconstruction restored the contact area and contact pressure back to levels of the native glenohumeral joint in all tested positions. The mean (±SD) force to translate the humeral head anteriorly for 10 mm (60° of abduction: 31.7 ± 12.6 N; 60° of abduction and 60° of external rotation: 28.6 ± 7.6 N) was significantly reduced after the creation of a 30% anterior bone glenoid defect (60° of abduction: 12.2 ± 6.8 N; 60° of abduction and 60° of external rotation: 11.4 ± 5.4 N; P < .001). After glenoid reconstruction with a J-bone graft, the mean peak translational force significantly increased (60° of abduction: 85.0 ± 8.2 N; 60° of abduction and 60° of external rotation: 73.6 ± 4.5 N; P < .001) compared with the defect state and baseline. The mean total graft protrusion under cyclical translation of the humeral head over 3000 cycles was 138.3 ± 169.8 µm, whereas the mean maximal mediolateral graft deflection was 320.1 ± 475.7 µm. Conclusion: Implant-free anatomic glenoid reconstruction with the J-bone grafting technique restored near-native glenohumeral contact areas and pressures, provided secure initial graft fixation, and demonstrated excellent osseous glenohumeral stability at time zero. Clinical Relevance: The implant-free J-bone graft is a viable alternative to commonly used glenoid reconstruction techniques, providing excellent graft fixation and glenohumeral stability immediately postoperatively. The normalization of glenohumeral contact patterns after reconstruction could potentially avoid the progression of dislocation arthropathy.


2017 ◽  
Vol 2 (3) ◽  
pp. 2473011417S0000 ◽  
Author(s):  
Yoo Jung Park ◽  
Dong-Woo Shim ◽  
Yeokgu Hwang ◽  
Jin Woo Lee

Category: Ankle Arthritis Introduction/Purpose: Periprosthetic osteolysis in total ankle arthroplasty (TAA) is a substantial problem. It may cause implant failure and has potential to affect long-term implant survival. To prevent major revisional arthroplasty, it is important to make an early diagnosis of osteolysis and decide an appropriate timing of surgical intervention such as bone graft. We report our experience of bone graft for osteolysis after TAA associated with clinical and radiologic outcome. Methods: Between May 2004 and Oct. 2013, 238 primary TAA were performed on 219 patients. We excluded 37 ankles with follow-up less than 24 months; thus, 201 ankles in 185 patients with mean follow-up of 61.9 (range, 24-130) months were included in the study. Nineteen patients were treated with a total of 21 bone graft procedures for periprosthetic osteolysis after TAA. Of these patients, 12 (57.1%) were males with mean follow-up length after bone graft 35.0 months. Location of osteolysis, bone grafting method and clinical outcome parameters using visual analog scale (VAS), American Orthopaedic Foot and Ankle Society (AOFAS) score were recorded. Results: Radiographs revealed total of 62 osteolysis lesions in 19 patients; 35 (56.5%) distal tibial lesions, 23 (37.0%) talar lesions. Autogenous iliac bone graft was used in 18 procedures (85.7%). The mean scores (and standard deviation) improved for the VAS from 4.8 ± 1.23 points before bone graft to 3.0 ± 0.94 points at the last follow-up (p<0.05); and for the AOFAS score from 76.8 ± 5.9 before bone graft to 84.3 ± 4.5 at the last follow-up (p<0.05). After 21 bone graft procedures, 6 demonstrated detection of newly developed osteolysis. One patient needed a repeat bone graft procedure with cementation after the primary bone grafting due to large cyst on distal tibia. There was no implant failure or major revisions after the bone graft. Conclusion: Bone graft for periprosthetic osteolysis may improve patient’s clinical outcome and give support to the structures surrounding the implant. Bone grafting in optimal timing may also improve implant survivorship. However, further study is needed for the etiology of newly developed painless osteolysis even after the bone graft.


1995 ◽  
Vol 32 (5) ◽  
pp. 420-427 ◽  
Author(s):  
Ross E. Long ◽  
Barbara E. Spangler ◽  
Mimi Yow

Fifty-six cleft sites were reviewed prior to alveolar bone grafting and subsequently evaluated for graft success using study models, periapical and occlusal radiographs from the Lancaster Cleft Palate Clinic. All patients in this sample had presurgical orthodontics to expand and align the maxillary arch prior to alveolar bone grafting. Ninety-five percent of the grafts were done using iliac crest, the remaining 5% were cranial grafts. The alveolar bone grafting technique used was as described by Boyne and Sands (1972, 1976). Cleft width was measured on a radiograph taken no more than 1 month preoperatively, following the completion of all orthodontic expansion. Cleft width was determined by inspection at its narrowest point. A distortion correction was attempted by determining the ratio of the radiographic width of the maxillary central incisor adjacent to the cleft compared with the actual width of this tooth measured on study models. The radiographic cleft width was then multiplied by this factor to approximate true cleft width. Alveolar contour was measured at least 6 months postoperatively using ratios of actual bone heights measured at the mesial, middle, and distal margin of the previous cleft compared with root length of adjacent teeth. This was to eliminate the radiographic distortion factors of foreshortening and elongation. Regression analysis was carried out to see if there was a correlation between preoperative cleft width and eventual success of the graft as measured on postsurgical radiographs. The success rate for achieving a bony bridge across the cleft was 91%. Mean alveolar crest height achieved was 93% of the anatomic root length of the tooth in the proximal segment and 96% of the anatomic root length of the tooth in the distal segment. There was significant, but low, negative correlation between presurgical cleft width and alveolar bone attachment of teeth adjacent to the grafted cleft site, after a mean radiographic follow-up of 3.1 years. Notching of the alveolar ridge in the region of the bone graft had a statistically significant low positive correlation with differing cleft widths.


Sign in / Sign up

Export Citation Format

Share Document