Can spatial planning really mitigate carbon dioxide emissions in urban areas? A case study in Taipei, Taiwan

2018 ◽  
Vol 169 ◽  
pp. 22-36 ◽  
Author(s):  
Szu-Hua Wang ◽  
Shu-Li Huang ◽  
Po-Ju Huang
2016 ◽  
Vol 61 (3) ◽  
pp. 587-600
Author(s):  
Paweł Wrona ◽  
Józef Sułkowski ◽  
Zenon Różański ◽  
Grzegorz Pach

Abstract Greenhouse gas emissions are a common problem noticed in every mining area just after mine closures. However, there could be a significant local gas hazard for people with continuous (but variable) emission of these gases into the atmosphere. In the Upper Silesia area, there are 24 shafts left for water pumping purposes and gases can flow through them hydraulically. One of them – Gliwice II shaft – was selected for inspection. Carbon dioxide emission with no methane was detected here. Changes in emission and concentration of carbon dioxide around the shaft was the aim of research carried out. It was stated that a selected shaft can create two kinds of gas problems. The first relates to CO2 emission into the atmosphere. Possible emission of that gas during one minute was estimated at 5,11 kg CO2/min. The second problem refers to the local hazard at the surface. The emission was detected within a radius of 8m from the emission point at the level 1m above the ground. These kinds of matters should be subject to regular gas monitoring and reporting procedures.


2021 ◽  
Vol 13 (11) ◽  
pp. 6304
Author(s):  
Raluca-Andreea Felseghi ◽  
Ioan Așchilean ◽  
Nicoleta Cobîrzan ◽  
Andrei Mircea Bolboacă ◽  
Maria Simona Raboaca

Alternative energy resources have a significant function in the performance and decarbonization of power engendering schemes in the building application domain. Additionally, “green buildings” play a special role in reducing energy consumption and minimizing CO2 emissions in the building sector. This research article analyzes the performance of alternative primary energy sources (sun and hydrogen) integrated into a hybrid photovoltaic panel/fuel cell system, and their optimal synergy to provide green energy for a green building. The study addresses the future hydrogen-based economy, which involves the supply of hydrogen as the fuel needed to provide fuel cell energy through a power distribution infrastructure. The objective of this research is to use fuel cells in this field and to investigate their use as a green building energy supply through a hybrid electricity generation system, which also uses photovoltaic panels to convert solar energy. The fuel cell hydrogen is supplied through a distribution network in which hydrogen production is outsourced and independent of the power generation system. The case study creates virtual operating conditions for this type of hybrid energy system and simulates its operation over a one-year period. The goal is to demonstrate the role and utility of fuel cells in virtual conditions by analyzing energy and economic performance indicators, as well as carbon dioxide emissions. The case study analyzes the optimal synergy between photovoltaic panels and fuel cells for the power supply of a green building. In the simulation, an optimally configured hybrid system supplies 100% of the energy to the green building while generating carbon dioxide emissions equal to 11.72% of the average value calculated for a conventional energy system providing similar energy to a standard residential building. Photovoltaic panels account for 32% of the required annual electricity production, and the fuel cells generate 68% of the total annual energy output of the system.


Heliyon ◽  
2020 ◽  
Vol 6 (8) ◽  
pp. e04772 ◽  
Author(s):  
Deni Kusumawardani ◽  
Ajeng Kartiko Dewi

Author(s):  
Courtney E. Grosvenor ◽  
Melissa C. Lott ◽  
Michael E. Webber

The impacts of the U.S. transportation and electricity generation sectors include air emissions and water consumption. Information and communication technologies (ICT) such as advanced video teleconferencing have the potential to displace some activities that have historically required transportation. While ICT can reduce environmental impacts compared to transportation options in many cases, there are non-obvious environmental trade-offs associated with replacing transportation with ICT. These tradeoffs are the consequence of many factors, including the particular local electricity mix, meeting duration, number of meeting participants, travel distances, travel modes, motive transport conversion technologies, and transport fuels. Identifying and quantifying these trade-offs is the focus of this research. For this study, a nomenclature and methodology were developed to compare environmental trade-offs associated with transportation and ICT. The nomenclature was designed to facilitate side-by-side comparison of the environmental impacts of travel and ICT and to allow expansion of the nomenclature for future study. The methodology considered a variety of conversion technologies for motive transport including spark-ignition, compression-ignition, fuel cells, and electric motors. Both conventional and developing fuels were considered including gasoline, ethanol, diesel, biodiesel, natural gas, hydrogen, and electricity. Likewise, electricity consumption for ICT included both traditional and developing electricity generation technologies. Carbon dioxide emissions and water consumption for ICT were assessed for comparison with transportation in a case study that demonstrated use of this methodology by considering three distinct scenarios for a particular business meeting: 1. Two meeting attendees travel to the meeting by diesel city bus while two travel in a private vehicle. 2. All four meeting attendees travel by private vehicle powered by compressed natural gas. 3. The four meeting attendees do not travel, but instead meet their clients virtually via ICT. The case study analyzed in this manuscript considers only the water and carbon dioxide impacts, but the nomenclature developed allows future expansion for analysis of other greenhouse gases. The three scenarios revealed that, compared to short travel distances, use of ICT does not always generate fewer carbon dioxide emissions. Depending on the mode of electricity generation, travel proved to be preferable from an emissions standpoint for scenarios in which travel distances were small. However, in cases that required long distances to travel, ICT often allowed businesses and individuals to reduce their environmental impacts, especially if electric power generation in that location utilized large amounts of relatively low-emissions technologies such as hydroelectric dams, wind, solar, and nuclear. Finally, it should be noted that, in addition to comparing ICT and travel impacts, this methodology can be used to calculate the environmental tradeoffs of various transportation options when travel is a necessity.


2021 ◽  
Vol 9 ◽  
Author(s):  
Elizabeth J. Abraham ◽  
Farah Ramadan ◽  
Dhabia M. Al-Mohannadi

Growing climate change concerns in recent years have led to an increased need for carbon dioxide emission reduction. This can be achieved by implementing the concept of circular economy, which promotes the practice of resource conservation, emission minimization, and the maintenance of sustainable revenue streams. A considerable amount of carbon dioxide emissions is a consequence of stationary sources from industrial processes. These emissions can be reduced using carbon capture utilization and storage (CCUS) or reduced at source by using emission free renewable resources. The method developed within this work uses mixed integer linear programming (MILP) to design sustainable clusters that convert seawater (including waste brine), air, and waste carbon dioxide emissions to value-added products with sunlight as the main energy source. In this way, circular economy is employed to minimize fresh resource consumption and maximize material reuse. The potential of this work is demonstrated through a case study, which shows that an industrial park may be profitable while adhering to strict emission and material constraints.


2008 ◽  
Vol 6 (1) ◽  
Author(s):  
Wee Kean Fong ◽  
Hiroshi Matsumoto ◽  
Chin Siong ho ◽  
Yu Fat Lun

In handling global wanning issues, among the most important measures are to reduce energy consumptions and carbon dioxide emissions. While many countries have recognized the importance of the role of urban planning in energy conservation and reduction of carbon dioxide emissions, spatial planning framework in Malaysia is still lacking in this aspect. Although there are some spatial planning policies indirectly favoring energy conservation, there is still no measure that directly emphasizes on promoting energy conservation and capping carbon dioxide emissions. Energy and carbon dioxide issues should thus be taken as one of the core parts in the urban planning process. It is necessary to develop and incorporate a decision making tool to assess the overall impact of development plans on energy consumptions and carbon dioxide emissions. While achieving the desired economic and social developments, it is necessary to create a low energy-consuming, carbon dioxide-emitting sustainable society.


Sign in / Sign up

Export Citation Format

Share Document