A Methodology for Evaluating the Environmental Trade-Offs for Different Travel and Information Communication Technologies (ICT) Options

Author(s):  
Courtney E. Grosvenor ◽  
Melissa C. Lott ◽  
Michael E. Webber

The impacts of the U.S. transportation and electricity generation sectors include air emissions and water consumption. Information and communication technologies (ICT) such as advanced video teleconferencing have the potential to displace some activities that have historically required transportation. While ICT can reduce environmental impacts compared to transportation options in many cases, there are non-obvious environmental trade-offs associated with replacing transportation with ICT. These tradeoffs are the consequence of many factors, including the particular local electricity mix, meeting duration, number of meeting participants, travel distances, travel modes, motive transport conversion technologies, and transport fuels. Identifying and quantifying these trade-offs is the focus of this research. For this study, a nomenclature and methodology were developed to compare environmental trade-offs associated with transportation and ICT. The nomenclature was designed to facilitate side-by-side comparison of the environmental impacts of travel and ICT and to allow expansion of the nomenclature for future study. The methodology considered a variety of conversion technologies for motive transport including spark-ignition, compression-ignition, fuel cells, and electric motors. Both conventional and developing fuels were considered including gasoline, ethanol, diesel, biodiesel, natural gas, hydrogen, and electricity. Likewise, electricity consumption for ICT included both traditional and developing electricity generation technologies. Carbon dioxide emissions and water consumption for ICT were assessed for comparison with transportation in a case study that demonstrated use of this methodology by considering three distinct scenarios for a particular business meeting: 1. Two meeting attendees travel to the meeting by diesel city bus while two travel in a private vehicle. 2. All four meeting attendees travel by private vehicle powered by compressed natural gas. 3. The four meeting attendees do not travel, but instead meet their clients virtually via ICT. The case study analyzed in this manuscript considers only the water and carbon dioxide impacts, but the nomenclature developed allows future expansion for analysis of other greenhouse gases. The three scenarios revealed that, compared to short travel distances, use of ICT does not always generate fewer carbon dioxide emissions. Depending on the mode of electricity generation, travel proved to be preferable from an emissions standpoint for scenarios in which travel distances were small. However, in cases that required long distances to travel, ICT often allowed businesses and individuals to reduce their environmental impacts, especially if electric power generation in that location utilized large amounts of relatively low-emissions technologies such as hydroelectric dams, wind, solar, and nuclear. Finally, it should be noted that, in addition to comparing ICT and travel impacts, this methodology can be used to calculate the environmental tradeoffs of various transportation options when travel is a necessity.

2016 ◽  
Vol 61 (3) ◽  
pp. 587-600
Author(s):  
Paweł Wrona ◽  
Józef Sułkowski ◽  
Zenon Różański ◽  
Grzegorz Pach

Abstract Greenhouse gas emissions are a common problem noticed in every mining area just after mine closures. However, there could be a significant local gas hazard for people with continuous (but variable) emission of these gases into the atmosphere. In the Upper Silesia area, there are 24 shafts left for water pumping purposes and gases can flow through them hydraulically. One of them – Gliwice II shaft – was selected for inspection. Carbon dioxide emission with no methane was detected here. Changes in emission and concentration of carbon dioxide around the shaft was the aim of research carried out. It was stated that a selected shaft can create two kinds of gas problems. The first relates to CO2 emission into the atmosphere. Possible emission of that gas during one minute was estimated at 5,11 kg CO2/min. The second problem refers to the local hazard at the surface. The emission was detected within a radius of 8m from the emission point at the level 1m above the ground. These kinds of matters should be subject to regular gas monitoring and reporting procedures.


2021 ◽  
Vol 13 (11) ◽  
pp. 6304
Author(s):  
Raluca-Andreea Felseghi ◽  
Ioan Așchilean ◽  
Nicoleta Cobîrzan ◽  
Andrei Mircea Bolboacă ◽  
Maria Simona Raboaca

Alternative energy resources have a significant function in the performance and decarbonization of power engendering schemes in the building application domain. Additionally, “green buildings” play a special role in reducing energy consumption and minimizing CO2 emissions in the building sector. This research article analyzes the performance of alternative primary energy sources (sun and hydrogen) integrated into a hybrid photovoltaic panel/fuel cell system, and their optimal synergy to provide green energy for a green building. The study addresses the future hydrogen-based economy, which involves the supply of hydrogen as the fuel needed to provide fuel cell energy through a power distribution infrastructure. The objective of this research is to use fuel cells in this field and to investigate their use as a green building energy supply through a hybrid electricity generation system, which also uses photovoltaic panels to convert solar energy. The fuel cell hydrogen is supplied through a distribution network in which hydrogen production is outsourced and independent of the power generation system. The case study creates virtual operating conditions for this type of hybrid energy system and simulates its operation over a one-year period. The goal is to demonstrate the role and utility of fuel cells in virtual conditions by analyzing energy and economic performance indicators, as well as carbon dioxide emissions. The case study analyzes the optimal synergy between photovoltaic panels and fuel cells for the power supply of a green building. In the simulation, an optimally configured hybrid system supplies 100% of the energy to the green building while generating carbon dioxide emissions equal to 11.72% of the average value calculated for a conventional energy system providing similar energy to a standard residential building. Photovoltaic panels account for 32% of the required annual electricity production, and the fuel cells generate 68% of the total annual energy output of the system.


Heliyon ◽  
2020 ◽  
Vol 6 (8) ◽  
pp. e04772 ◽  
Author(s):  
Deni Kusumawardani ◽  
Ajeng Kartiko Dewi

2021 ◽  
Vol 308 ◽  
pp. 01010
Author(s):  
Shen Yizhi ◽  
Wei Minrui ◽  
Hou Bowen

Due to the accelerated industrial and urbanization development, climate change, and increasing populations and life quality expectations, the issue of drinking water shortage has raised much public awareness. The desalination system has been widely applied to accommodate the growing demand for clean water resources despite the continuous concerns about its relatively higher energy consumption and environmental footprints. This research conducted a case study in the Tampa Bay Regional Surface Water Treatment Plant and Tampa Bay Seawater Desalination Plant in Florida, U.S. It analysed the performance and environmental impacts of conventional and desalination water supply systems on three sides: energy consumption, carbon footprint, and solid waste. Potential negative effects of both water supply systems are generally associated with surface water ecology, groundwater aquifers, coastal environment, and marine organisms. Various environmental impact mitigation plans have been proposed to prevent or restore the detriments caused by carbon dioxide emissions, plant construction, and concentrated brine discharge. Due to the deficiency in freshwater resources, desalination technology is more promising through proper regulations and regional sustainable development.


2011 ◽  
Vol 23 (6) ◽  
pp. 556-566 ◽  
Author(s):  
Ramon Farreny ◽  
Jordi Oliver-Solà ◽  
Machiel Lamers ◽  
Bas Amelung ◽  
Xavier Gabarrell ◽  
...  

AbstractThe increase of tourism to the Antarctic continent may entail not only local but also global environmental impacts. These latter impacts, which are mainly caused by transport, have been generally ignored. As a result, there is a lack of data on the global impacts of Antarctic tourism in terms of energy consumption and carbon dioxide emissions. This paper presents and applies a methodology for quantifying CO2 emissions, both for the Antarctic vessel fleet as a whole and per passenger (both per trip and per day). The results indicate that the average tourist trip to Antarctica results in 5.44 t of CO2 emissions per passenger, or 0.49 t per passenger and day. Approximately 70% of these emissions are attributable to cruising and 30% to flying, which highlights the global environmental relevance of local transport for this type of tourism.


Author(s):  
Angela Pakes ◽  
Tuncer Edil ◽  
Morgan Sanger ◽  
Renee Olley ◽  
Tyler Klink

The conventional highway resurfacing technique of mill and overlay (M&O) partially removes the existing pavement and replaces it with asphalt derived from some recycled but mostly virgin materials. Cold-in-place recycling (CIR) is an alternative highway resurfacing method that partially mills the existing pavement and uses it beneath a thinner layer of new asphalt. CIR has become widely used for convenience and cost benefits, but the environmental impacts are poorly quantified. The objective of this study was to quantify the environmental life cycle benefits of using CIR for highway resurfacing instead of M&O. Material quantities and equipment used for CIR and what would have been used in M&O for the same project were provided by contractors for nine highway resurfacing projects in Wisconsin. With this information, a life cycle assessment (LCA) tool was used to determine the relative environmental impacts of the two methods, with energy consumption, water usage, and carbon dioxide emissions chosen as the metrics of the LCA. Results show average environmental savings of 23% in energy consumption and carbon dioxide emissions and 20% in water consumption when using CIR instead of M&O for highway resurfacing. Additionally, CIR reduced virgin aggregate consumption by 37%. Environmental savings achieved by using CIR were found to be directly related to the reduction in volume of new hot mix asphalt (HMA) used, and to the reduction in transportation of materials to and from the site. Linear correlations that can be used to estimate savings of future CIR projects were projected.


Sign in / Sign up

Export Citation Format

Share Document