Objective:
This work identifies materials that satisfy refractive index, optical band gap, composition
profile, conductivity, hall mobility, carrier type and carrier concentration to utilize them in making
thin film photovoltaic cells.
Methods:
We fabricated phosphorous doped amorphous silicon (n+ aSi:H), boron doped amorphous silicon
germanium(p+ aSiGe:H) and intrinsic amorphous silicon (i-aSi:H). A detailed and systematic characterization
of the fabricated layers was done. The phosphorous doped amorphous silicon (n+ aSi:H) showed
an optical band gap of 1.842 eV and an electron mobility of 295.45 cm2V-1s-1. The boron doped amorphous
silicon germanium (p+ aSiGe:H) exhibited an optical band gap of 1.74 eV and a hole mobility of
158.353 cm2V-1s-1. The intrinsic amorphous silicon (i-aSi:H) has an optical band gap of 1.801 eV. The
films of n+ aSi:H, i-aSi:H and p+ aSiGe:H can be utilized for fabricating graded band gap single junction
thin film solar cells, as they are semiconducting materials with varying band gaps in the range of 1.74 eV
to 1.84 eV. The tailoring of band gap achieved by the proposed material combination has been presented
using its energy band diagram.
Results:
In this work, we are proposing a single junction graded band gap solar cell with aSi:H and aSi-
Ge:H alloys of varying doping to achieve grading of band gap, which improves the efficiency while keeping
the cell compact and light.
Conclusion:
As a first step in the validation, we have simulated a thin film solar cell using SCAPS1D
simulation software with the measured parameters for each of the layers and found that it successfully performs
as solar cell with an efficiency of 14.5%.
Current State: The Development of Thin Film Solar Cells Based on Kesteritee Compound