Numerical study on the influence of vortex generators on wind turbine aerodynamic performance considering rotational effect

Author(s):  
Ruifang Jiang ◽  
Zhenzhou Zhao ◽  
Huiwen Liu ◽  
Tongguang Wang ◽  
Ming Chen ◽  
...  
Energies ◽  
2020 ◽  
Vol 13 (10) ◽  
pp. 2535
Author(s):  
Chengyong Zhu ◽  
Tongguang Wang ◽  
Jie Chen ◽  
Wei Zhong

Passive vortex generators (VGs) have been widely applied on wind turbines to boost the aerodynamic performance. Although VGs can delay the onset of static stall, the effect of VGs on dynamic stall is still incompletely understood. Therefore, this paper aims at investigating the deep dynamic stall of NREL S809 airfoil controlled by single-row and double-row VGs. The URANS method with VGs fully resolved is used to simulate the unsteady airfoil flow. Firstly, both single-row and double-row VGs effectively suppress the flow separation and reduce the fluctuations in aerodynamic forces when the airfoil pitches up. The maximum lift coefficient is therefore increased beyond 40%, and the onset of deep dynamic stall is also delayed. This suggests that deep dynamic-stall behaviors can be properly controlled by VGs. Secondly, there is a great difference in aerodynamic performance between single-row and double-row VGs when the airfoil pitches down. Single-row VGs severely reduce the aerodynamic pitch damping by 64%, thereby undermining the torsional aeroelastic stability of airfoil. Double-row VGs quickly restore the decreased aerodynamic efficiency near the maximum angle of attack, and also significantly accelerate the flow reattachment. The second-row VGs can help the near-wall flow to withstand the adverse pressure gradient and then suppress the trailing-edge flow separation, particularly during the downstroke process. Generally, double-row VGs are better than single-row VGs concerning controlling deep dynamic stall. This work also gives a performance assessment of VGs in controlling the highly unsteady aerodynamic forces of a wind turbine airfoil.


Author(s):  
N. Cristobal Uzarraga-Rodriguez ◽  
A. Gallegos-Mun˜oz ◽  
J. Manuel Riesco A´vila

A numerical analysis of a rooftop vertical axis wind turbine (VAWT) for applications in urban area is presented. The numerical simulations were developed to study the flow field through the turbine rotor to analyze the aerodynamic performance characteristics of the device. Three different blade numbers of wind turbine are studied, 2, 3 and 4, respectively. Each one of the models was built in a 3D computational model. The effects generated in the performance of turbines by the numbers of blades are considered. A Sliding Mesh Model (SMM) capability was used to present the dimensionless form of coefficient power and coefficient moment of the wind turbine as a function of the wind velocity and the rotor rotational speed. The numerical study was developed in CFD using FLUENT®. The results show the aerodynamic performance for each configuration of wind turbine rotor. In the cases of Rooftop rotor the power coefficient increases as the blade number increases, while in the case of Savonius rotor the power coefficient decrease as the blades number increases.


2021 ◽  
pp. 0309524X2110385
Author(s):  
Zhou Wu ◽  
Tao Chen ◽  
Haipeng Wang ◽  
Hongwei Shi ◽  
Mingzhou Li

The transition area of the blade had a large relative thickness of airfoil, which was prone to the flow separation. The vortex generators (VGs) could restrain the flow separation. In this paper, the VGs were installed at the transition area of the WindPACT 1.5 MW wind turbine blades. The numerical simulation method was used to investigate the effects of the VGs on the aerodynamic performance of the blade. The high-energy vortexes were generated at the tail by the VG. It could change the energy distribution and flow characteristics of the airflow in the boundary layer. There were influences by the geometric parameters of the VGs. The VGs could change the aerodynamic performance at the transition area of the blade. A satisfactory result was obtained for reasonable geometrical parameters of the VGs. It also could restrain the flow separation of the blade surface and improve the torque.


Sign in / Sign up

Export Citation Format

Share Document