Investigation of biogas production potential from mechanical separated municipal solid waste as an approach for developing countries (case study: Isfahan-Iran)

2020 ◽  
Vol 119 ◽  
pp. 109586 ◽  
Author(s):  
Seyed Mohammad Mehdi Noorbakhsh Dehkordi ◽  
Ahmad Reza Taghipour Jahromi ◽  
Ali Ferdowsi ◽  
Mohammad Shumal ◽  
Ali Dehnavi
2021 ◽  
Vol 1 (3) ◽  
pp. 1-8
Author(s):  
Ravikiran Shet ◽  
Srikanth Mutnuri

India generates 0.15 million metric tons (MT) of solid waste per day out of which more than 80% is organic fraction. Apart from this, 38% of the households use septic tanks where proper disposal of faecal sludge is also need of the hour. Anaerobic co-digestion (ACD) of two different substrates has positive potential towards solving this problem. In the present study, ACD of organic fraction of municipal solid waste (OFMSW) and septage solids (SS) was studied at three different levels, i.e., lab-scale, pilot-scale (1 m3), and full scale- capacity (325 m3). A loading rate of 1.5 kg VS/m3 was selected. The bio-methanation potential (BMP) assay showed a maximum biogas generation, i.e., 120±20.6 mL/gmVS with 68% maximum methane concentration at a 5:1 OFMSW and SS ratio. Cumulative biogas production after 30 days was 1.6 L/gmVS. The ultimate biogas production in the pilot-scale plant was 1000±100.5 L/day with 71% methane. The plant was also efficient in removing 87% of COD and 61% of VS. The full-scale anaerobic digester was set up at Mormugao Municpal Council, Goa India wherein the objective was to co-digest OFMSW and SS. This digester showed a similar removal pattern like earlier studies i.e., 94% and 45% COD and VS removal, respectively. The average methane content of the biogas was 68%. Full-scale operation of the anaerobic digester did not show any operational problems at the chosen co-digestion conditions.


Author(s):  
Diosnel Antonio Rodríguez Lopez ◽  
Pâmela Andréa Mantey Dos Santos ◽  
Ênio Leandro Machado ◽  
Adriane De Assis Lawisch Rodríguez ◽  
Adilson Moacir Becker Júnior ◽  
...  

2010 ◽  
Vol 9 (8) ◽  
pp. 1021-1029 ◽  
Author(s):  
Goran Vujic ◽  
Nebojsa Jovicic ◽  
Nebojsa Redzic ◽  
Gordana Jovicic ◽  
Bojan Batinic ◽  
...  

Author(s):  
W. Du ◽  
J. Yang ◽  
H. Ge ◽  
J. Yan ◽  
N. Bhuiyan ◽  
...  

Abstract. As the urban population grows and the global economy develops, municipal solid waste management (MSWM) has become an increasingly prominent global issue. MSWM is particularly difficult in developing countries due to its high cost and time-consuming nature. The Environment-based design (EBD) can potentially contribute to global MSWM by reducing costs and increasing efficiency, especially in helping developing countries identify critical issues in MSWM. This paper uses and demonstrates the effectiveness and efficiency of the EBD method to analyze and identify critical issues in MSWM, using the city of Nairobi as a case study. This paper contains the first two of EBD's three activities: environment analysis and conflict identification, during the design problem period, design knowledge, and design solutions simultaneously and interdependently evolve as a part of the environment. The comparison with the existing literature confirms that the conclusions reached are, to some extent, reliable, time-saving, and less costly, which will offer a possibility to solve the problem of MSWM in impoverished areas.


Sign in / Sign up

Export Citation Format

Share Document