Cross flow filtration (CFF) is a common membrane separation process with applications in food, biochemical and petroleum industries. In particular, membranes can be used for liquid-liquid separation processes such as needed in oil-water separation. A major challenge in cross flow filtration is membrane fouling. It can decrease significantly the permeate flux and a membrane’s efficiency. Membrane fouling can be mitigated by inducing shear on the membrane’s surface and this can be enhanced by inducing a swirl in the flow. In addition, a possible approach to improve membrane efficiency consists of repelling droplets/particles from the porous surface toward the centerline using a repulsive electric force. For this purpose, the surface of the membrane can be exposed to electric potential and droplets/particles are also induced to have the same electric charge.
In this work, numerical simulations of charged non-deformable droplets moving within an axially rotating charged tubular membrane are performed. The results show that by increasing the electric potential on the membrane surface, the repelling force increases which obviously improves the grade efficiency of the membrane. However, the electric field gradients found in the flow field require large potentials on the membrane surface to observe a noticeable effect. Hence, a smaller solid cylinder is located in the centerline of the flow channel with zero potential. This solid cylinder enhances the electric field gradient in the domain which results in higher repelling forces and larger grade efficiency of the membrane at small potentials. The addition of a small cylinder in the flow field also improves the grade efficiency increases due to the higher shear stress near the membrane surface.
