Efficacy of quaternary ammonium groups based polyelectrolytes for the reduction of various pesticide formulations content from synthetic wastewater

Author(s):  
uminita Ghimici ◽  
Marieta Nichifor
2014 ◽  
Vol 798-799 ◽  
pp. 127-132 ◽  
Author(s):  
Elaine Lope da Silva ◽  
Aline Cadígena Lima Patrício ◽  
Guilherme Costa de Oliveira ◽  
Meiry Gláucia Freire Rodrigues

This study aims to conduct an investigation on the performance of an organophilic clay as adsorbent in the oil/water separation process. One goal of this work is to prepare and characterize untreated sodium clay (BSN-01) from Argentina and treated BSN-01. The method used to prepare the organoclay replaces the interlayer cations of the clay (Na+) by quaternary ammonium cations. Tests used X-ray diffraction to verify the obtaining of organoclays. The diffractograms showed that the basal distance of the clay BSN-01 was modified, indicating that the quaternary ammonium salt was intercalated. The results of Cation Exchange Capacity suggested that the interlayer cations of the clay were exchanged with the quaternary cations of the surfactant. Finite bath tests determined the rate and capacity of oil removal by the treated clay. Up to 42.63 mg/g of oil removal capacity (92.34% efficiency) was reached, indicating that the clay treated with CTAC is an excellent alternative in the process of oil removal.


2020 ◽  
Vol 22 (19) ◽  
pp. 6437-6443
Author(s):  
Cheng-Kou Liu ◽  
Meng-Yi Chen ◽  
Xin-Xin Lin ◽  
Zheng Fang ◽  
Kai Guo

A catalyst-, oxidant-, acidic solvent- and quaternary ammonium salt-free electrochemical para-selective hydroxylation of N-arylamides at rt in batch and continuous-flow was developed.


2016 ◽  
Vol 14 (3) ◽  
pp. 557-561
Author(s):  
Nguyễn Thị Yên ◽  
Kiều Thị Quỳnh Hoa

Lead contaminated wastewater negatively impacts to living organisms as well as humans. In recent years, a highly promising biological process using the anaerobic production of sulfide ions by sulfate-reducing bacteria has presented itself as an alternative option for the removal of lead. This process is based on microbial utilization of electron donors, such as organic compounds (carbon sources), and sulfate as the terminal electron acceptor for sulfide production. The biogenic hydrogen sulfide reacts with dissolved heavy metals to form insoluble metal sulfide precipitates Removal of lead by an enriched consortium of sulfate-reducing bacteria (DM10) was evaluated sulfate reduction, sulfide production and lead precipitation. Four parallel anaerobic continuous stirred tank reactors (CSTR, V = 2L) (referred as R1 - R4) were fed with synthetic wastewater containing Pb2+ in the concentrations of 0, 100, 150 and 200 mg L-1 of lead and operated with a hydraulic retention time of 5 days for 40 days. The loading rates of each metal in R1- R4 were 0, 20, 30 and 40 mg L-1 d-1, respectively. The results showed that there was no inhibition of SRB growth and that lead removal efficiencies of 99-100% for Pb2+ were achieved in R2 (100 mg L-1) and R3 (150 mg L-1) throughout the experiment. For the highest lead concentration of  200 mg L-1, a decrease in efficiency of removal (from 100 to 96%) was observed at the end of the experiment. The obtained result of this study might help for a better control operation and performance improvements of reactors.


2020 ◽  
Vol 86 (8) ◽  
pp. 23-31
Author(s):  
V. G. Amelin ◽  
D. S. Bolshakov

The goal of the study is developing a methodology for determination of the residual amounts of quaternary ammonium compounds (QAC) in food products by UHPLC/high-resolution mass spectrometry after water-acetonitrile extraction of the determined components from the analyzed samples. The identification and determination of QAC was carried out on an «UltiMate 3000» ultra-high-performance liquid chromatograph (Thermo Scientific, USA) equipped with a «maXis 4G» high-resolution quadrupole-time-of-flight mass spectrometric detector and an ion spray «ionBooster» source (Bruker Daltonics, Germany). Samples of milk, cheese (upper cortical layer), dumplings, pork, chicken skin and ground beef were used as working samples. Optimal conditions are specified for chromatographic separation of the mixture of five QAC, two of them being a mixture of homologues with a linear structure (including isomeric forms). The identification of QAC is carried out by the retention time, exact mass of the ions, and coincidence of the mSigma isotopic distribution. The limits for QAC detection are 0.1 – 0.5 ng/ml, the determination limits are 1 ng/ml for aqueous standard solutions. The determinable content of QAC in food products ranges within 1 – 100 ng/g. The results of analysis revealed the residual amount of QAC present in all samples, which confirms data of numerous sources of information about active use of QAC-based disinfectants in the meat and dairy industry. The correctness of the obtained results is verified by introduction of the additives in food products at a level of 10 ng/g for each QAC. The relative standard deviation of the analysis results does not exceed 0.18. The duration of the analysis is 30 – 40 min.


2015 ◽  
Vol 14 (3) ◽  
pp. 681-688
Author(s):  
Milan Sak-Bosnar ◽  
Natalija Velic ◽  
Olivera Galovic ◽  
Tonci Rezic ◽  
Bozidar Santek ◽  
...  
Keyword(s):  

2013 ◽  
Vol 12 (12) ◽  
pp. 2371-2383
Author(s):  
Krishnaswamy Usharani ◽  
Perumalsamy Lakshmanaperumalsamy ◽  
Muthusamy Muthukumar

2013 ◽  
Vol 50 (1) ◽  
pp. 9-13 ◽  
Author(s):  
Yong-Qiang Sun ◽  
Wen-Jing Li ◽  
Wan-Xu Wang ◽  
Qiu-Xiao Li ◽  
Wieslaw Hreczuch ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document