This paper describes the development and use of a dynamic simulation model and the implementation of a novel leak detection system. Experiences from the implementation and operation of the system will also be detailed from a user perspective. The dynamic model may be used for the transient simulation of the pipelines. The model was used to test the real-time leak detection system. The results of the simulation also prompted a change in the control scheme of the pipelines that resulted in less transient operation. The leak detection system is based upon rigorous thermodynamics and dynamic mass balance calculations driven by real-time information from field flow, pressure and temperature sensors. This system was successfully implemented to replace a simple volume balance system for NGL pipelines near Empress, Alberta.