Mechanism of the oxidation and degradation of the aluminide coating on the nickel–base single-crystal superalloy DD32M

2010 ◽  
Vol 204 (21-22) ◽  
pp. 3641-3646 ◽  
Author(s):  
C.T. Liu ◽  
J. Ma ◽  
X.F. Sun ◽  
P.C. Zhao
2007 ◽  
Vol 22 (1) ◽  
pp. 206-216 ◽  
Author(s):  
Y.N. Wu ◽  
A. Yamaguchi ◽  
H. Murakami ◽  
S. Kuroda

Platinum-iridium films (Ir = 0, 32, 46, 83, 100 at.%) were deposited on the nickel-base single crystal superalloy through magnetron sputtering. After annealing and aluminizing, the Pt-Ir modified aluminide coatings mainly consisted of PtAl2 and β-(Ni,Pt,Ir)Al phases. Hot corrosion resistance of Pt-Ir modified aluminide coatings with the different Ir contents were evaluated by exposure at 1173 K in the presence of the 90%Na2SO4 + 10%NaCl (wt%) salt deposits. The corrosion kinetics curves of the specimens were plotted up to 100 h heating time. The phase constitution, morphology of corrosion products, and element concentrations along the cross section were also measured. The lowest mass gain (0.299 mg/cm2, after 100 h) was observed for Pt-46Ir aluminide coating because the dense and continuous protective Al2O3 scale formed. Phase transformation from β-(Ni,Pt)Al to γ′-(Ni,Pt)3Al, characteristics of the scale, and protection by Pt/Ir enriched layer had the important effects on the hot corrosion behavior of modified aluminide coatings.


2021 ◽  
pp. 109737
Author(s):  
Hai-Qing Pei ◽  
Meng Li ◽  
Ping Wang ◽  
Xiao-Hu Yao ◽  
Zhi-Xun Wen ◽  
...  

2015 ◽  
Vol 636 ◽  
pp. 608-612 ◽  
Author(s):  
Xinhong Xiong ◽  
Dunmiao Quan ◽  
Pengdan Dai ◽  
Zhiping Wang ◽  
Qiaoxin Zhang ◽  
...  

Author(s):  
Piao Li ◽  
Wen Jiang ◽  
Shao-Shi Rui ◽  
Wei-xing Yao ◽  
Hui-ji Shi ◽  
...  

2015 ◽  
Vol 750 ◽  
pp. 139-144 ◽  
Author(s):  
De Long Shu ◽  
Su Gui Tian ◽  
Xin Ding ◽  
Jing Wu ◽  
Qiu Yang Li ◽  
...  

By means of heat treatment and creep property measurement, an investigation has made into the creep behaviors of a containing 4.5% Re nickel-base single crystal superalloy at high temperature. Results show that the elements W, Mo and Re are enriched in the dendrite arm regions, the elements Al, Ta, Cr and Co are enriched in the inter-dendrite region, and the segregation extent of the elements may be obviously reduced by means of heat treatment at high temperature. In the temperature ranges of 1070--1100 °C, the 4.5% Re single crystal nickel-based superallloy displays a better creep resistance and longer creep life. The deformation mechanism of the alloy during steady state creep is dislocations slipping in the γ matrix and climbing over the rafted γ′ phase. In the later stage of creep, the deformation mechanism of alloy is dislocations slipping in the γ matrix, and shearing into the rafted γ′ phase, which may promote the initiation and propagation of the micro-cracks at the interfaces of γ/γ′ phases up to the occurrence of creep fracture.


Sign in / Sign up

Export Citation Format

Share Document